CHANGELOG 125 KB
Newer Older
wdenk's avatar
wdenk committed
1
2
3
4
======================================================================
Changes for U-Boot 1.1.3:
======================================================================

5
6
* Fix CompactFlash problem on HMI1001 board

7
8
9
* Make new "mtdparts" code build with older compilers
  Patch by Andrea Scian, 09 Aug 2005

10
11
12
13
14
* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
  CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
  with the 405 defines and the linux kernel defines.
  Patch by Stefan Roese, 08 Aug 2005

15
16
* Fix compiler warnings with older GCC versions

17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
* Add common (with Linux) MTD partition scheme and "mtdparts" command

  Old, obsolete and duplicated code was cleaned up and replace by the
  new partitioning method. There are two possible approaches now:

  The first one is to define a single, static partition:

  #undef CONFIG_JFFS2_CMDLINE
  #define CONFIG_JFFS2_DEV               "nor0"
  #define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF	/* use whole device */
  #define CONFIG_JFFS2_PART_SIZE         0x00100000	/* use 1MB */
  #define CONFIG_JFFS2_PART_OFFSET       0x00000000

  The second method uses the mtdparts command line option and dynamic
  partitioning:

  /* mtdparts command line support */
  #define CONFIG_JFFS2_CMDLINE
  #define MTDIDS_DEFAULT         "nor1=zuma-1,nor2=zuma-2"
  #define MTDPARTS_DEFAULT       "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"

  Command line of course produces bigger images, and may be inappropriate
  for some targets, so by default it's off.

41
42
* Fix build problems for PM856 Board

43
44
45
46
* Fix sign extension bug in 'fpga loadb' command;
  make 'fpga loadb' always print the file header info
  Patch by Andrew Dyer, 11 Jan 2005

47
48
* Fix errors that occur when accessing SystemACE CF
  Patch by Jeff Angielski, 09 Jan 2005
49

50
51
52
* Document switching between U-Boot and PlanetCore on RPXlite
  by Sam Song, 24 Dec 2004

53
54
* Fix PowerQUICC II mask detection.
  Patch by Eugene Surovegin, 20 Dec 2004
55

56
57
58
* Add support for Altera NIOS DK1C20 board
  Patch by Shlomo Kut, 13 Dec 2004

Wolfgang Denk's avatar
Wolfgang Denk committed
59
60
61
62
63
* Add support for ep8248 board
  Patch by Yuli Barcohen, 12 Dec 2004

  Minor code cleanup.

64
65
66
* Fix baudrate setting for KGDB on MPC8260
  Patch by HoJin, 11 Dec 2004

Wolfgang Denk's avatar
Wolfgang Denk committed
67
68
* Fix 'mii help' text formatting
  Patch by Cory Tusar, 10 Dec 2004
Wolfgang Denk's avatar
Wolfgang Denk committed
69

Wolfgang Denk's avatar
Wolfgang Denk committed
70
71
72
* Fix return code of NFS command
  Patch by Hiroshi Ito, 11 Dec 2004

Wolfgang Denk's avatar
Wolfgang Denk committed
73
74
* Fix typo

75
76
77
* Fix compiler warnings in cpu/ppc4xx/usbdev.c
  Patch by Steven Blakeslee, 04 Aug 2005

78
79
80
* Add support for AMCC Bamboo PPC440EP eval board
  Patch by Stefan Roese, 04 Aug 2005

81
82
83
84
85
86
87
88
* Patch by Jon Loeliger
  Fix style issues primarily in 85xx and 83xx boards.
    - C++ comments
    - Trailing white space
    - Indentation not by TAB
    - Excessive amount of empty lines
    - Trailing empty lines

89
* Patch by Ron Alder, 11 Jul 2005
90
91
92
    Add Xianghua Xiao and Lunsheng Wang's support for the
    GDA MPC8540 EVAL board.

Eran Liberty's avatar
Eran Liberty committed
93
94
95
* Patch by Eran Liberty
  Add support for the Freescale MPC8349ADS board.

96
* Patch by Jon Loeliger, 25 Jul 2005
97
98
99
  Move the TSEC driver out of cpu/mpc85xx as it will be shared
  by the upcoming mpc83xx family as well.

100
* Patch by Jon Loeliger, 05 May 2005
101
102
103
104
105
106
  Implemented support for MPC8548CDS board.
  Added DDR II support based on SPD values for MPC85xx boards.
  This roll-up patch also includes bugfies for the previously
  published patches:
    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O

107
* Patch by Jon Loeliger, 10 Feb 2005
108
109
  Add config option CONFIG_HAS_FEC calling out 8540 FEC features.

110
* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
111
112
113
114
115
  For MPC85xxCDS:
    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
    for faster flash parts.
    Add documentation for BR/OR for FLASH.

116
* Patch by Jon Loeliger 08 Feb 2005
117
118
  Determine L2 Cache size dynamically on 85XX boards.

119
* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
120
121
122
123
124
  - Convert the CPM2 based functionality to use new CONFIG_CPM2
    option rather than a myriad of CONFIG_MPC8560-like variants.
    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
    new CONFIG_CPM2 option to each 8260 board.
wdenk's avatar
wdenk committed
125

126
127
128
* Add support for MicroSys PM856 board
  Patch by Josef Wagner, 03 Aug 2005

Wolfgang Denk's avatar
Wolfgang Denk committed
129
130
131
* Minor fixes to PM854 board
  Patch by Josef Wagner, 03 Aug 2005

132
133
134
* Adjust configuration of XENIAX board
  (chip select and GPIO required for USB operation)

135
136
137
138
* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
  routed to the Watchdog handler
  Patch by Eugene Surovegin, 18 Jun 2005

139
* (re)enabled scsi commands do_scsi() and do_scsiboot()
140
141
  Patch by Denis Peter, 06 Dec 2004

142
143
144
* Fix endianess problem in TFTP / NFS default filenames
  Patch by Hiroshi Ito, 06 Dec 2004

145
146
147
148
* Ignore broadcast status bit in received frames in 8260 FCC ethernet
  loopback test code
  Patch by Murray Jensen, 18 Jul 2005

149
150
151
* Fix typo in mkconfig script (used == instead of =)
  Patch by Murray Jensen, 18 Jul 2005

152
153
* Cleanup build problems on 64 bit build hosts

Wolfgang Denk's avatar
Wolfgang Denk committed
154
155
* Update MAINTAINERS file

156
157
158
159
160
161
162
163
164
165
166
167
* Patch by Stefan Roese, 01 Aug 2005:
  - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
    (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
    for details.
  - Sycamore (PPC405GPr) eval board added (Walnut port is extended
    to run on both 405GP and 405GPr eval boards).

* Patch by Steven Blakeslee, 27 Jul 2005:
  - Add support for AMCC PPC440EP/GR.
  - Add support for AMCC Yosemite PPC440EP eval board.
  - Add support for AMCC Yellowstone PPC440GR eval board.

168
169
170
171
* Minor fixes for PPChameleon Board:
  - fix alignment of NAND size
  - make code do what the comment says

Wolfgang Denk's avatar
Wolfgang Denk committed
172
173
174
175
176
177
178
* Implement h/w sector protection status synchronization at boot.
  The code is provided for, and was tested on, the Yukon/Alaska
  and PM520 boards only.

  A bug in flash_real_protect() for the Yukon board was fixed by
  adding a function that tells if two banks are on one flash chip.

179
180
181
182
183
* Fix sysmon POST problem: check I2C error codes
  This fixes a problem of displaying bogus voltages when the voltages
  are so low that the I2C devices start failing while the rest of the
  system keeps running.

184
185
186
* Patch by Cedric Vincent, 6 Jul 2005:
  Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"

187
188
189
* Patch by Jon Loeliger, 20 Jul 2005:
  Add missing PCI IO port definitions.

190
191
192
193
* Add CompactFlash support for HMI1001 board.

* Adjust printed board ID for LWMON board.

Wolfgang Denk's avatar
Wolfgang Denk committed
194
195
* Fix low-level OHCI transfers for ARM920t and MPC5xxx

196
197
198
199
* Add new argument format for flash commands to allow for usage like
  "erase $(addr) +$(filesize)", i. e. a size argument can be used and
  U-Boot will automaticially find the end of the corresponding sector.

stroese's avatar
stroese committed
200
201
202
* Patch by Stefan Roese, 5 Jul 2005:
  Update uc100 board PHY setup

stroese's avatar
stroese committed
203
204
205
* Patch by Stefan Roese, 1 Jul 2005:
  Fix PHY address for CATcenter board (now correct!)

206
207
208
209
* Patch by Stefan Roese, 30 Jun 2005:
  Fix PHY addresses for PPChameleon and CATcenter boards
  Change MAINTAINER for most esd boards

wdenk's avatar
wdenk committed
210
211
212
* Patch by Detlev Zundel, 30 Jun 2005:
  Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code

213
214
215
216
217
218
219
* Fix baudrate calculation problem on MPC5200 systems

* Add EEPROM and RTC support for HMI1001 board

* Patch by Detlev Zundel, 20 Jun 2005:
  Fix initialization of low active GPIO pins on inka4x0 board

220
221
222
* Enable redundant environment, disable HW flash protection of
  HMI1001 board

wdenk's avatar
wdenk committed
223
224
225
226
227
228
229
230
* Patch by Travis Sawyer, 10 Jun 2005:
  Initialize allocated dev and private hw structures
  after their respective allocation in 440gx_enet.c

* Patch by Steven Scholz, 10 Jun 2005:
  Fix byteorder problems with second argument of "bootm" with
  standalone images;

wdenk's avatar
wdenk committed
231
232
233
234
* Add support for HMI1001 board

* Disable "date" and "sntp" commands on TQM866M

235
236
* Fix watchdog reset problems on LWMON board

wdenk's avatar
wdenk committed
237
238
239
240
241
* Patch by Juergen Selent, 17 May 2005:
  Add support for Funkwerk VoVPN gateway module.

* Cleanup debug code for MPC8220 FEC driver

242
243
244
245
246
247
* Extend burst mode RAM test program to take a loop count
  (0 = infinite)

* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
  those boards that use it.

wdenk's avatar
wdenk committed
248
249
250
251
252
253
254
* Patches by Greg Ungerer, 19 May 2005:
  - add support for the KS8695P (ARM 922 based) CPU
  - add support for the OpenGear CM4008, CM4116 and CM4148 boards

* Patch by Steven Scholz, 19 May 2005:
  Add support for CONFIG_SERIAL_TAG on ARM boards

wdenk's avatar
wdenk committed
255
256
257
* Add PCI support for Sorcery board.
  Code cleanup (especially Sorcery / Alaska / Yukon serial driver).

258
259
260
* Fix compile problems caused by new burst mode SDRAM test;
  make port pins to trigger logic analyzer configurable

wdenk's avatar
wdenk committed
261
262
* Fix timer handling on MPC85xx systems

263
264
265
266
* Fix debug code in omap5912osk flash driver

* Add support for MPC8247 based "IDS8247" board.

267
268
* Add support for 2 x TSEC interfaces on the TQM8540 board.

269
270
271
272
* On LWMON we must use the watchdog to reset the board as the CPU
  genereated HRESET pulse is too short to reset the external
  circuitry.

273
274
275
* Add test tool to exercise SDRAM accesses in burst mode
  (as standalone program, MPC8xx/PowerPC only)

276
277
278
* Increase CFG_MONITOR_LEN for Rattler board to match actual code
  size.

279
* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
280
281
282
  March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
  added to support LZO and LZARI compression modes (undefined by
  default).
283

284
285
* Fix problem with symbolic links in JFFS2 code.

286
287
288
* Use linker ASSERT statement to prevent undetected overlapping of
  sections on PPChameleon board; other boards might use this, too.

289
290
291
292
293
294
295
296
* Patch by Stefan Roese, 03 May 2005:
  Update for P3G4
  Fix problems in cmd_universe.c

* Patch by Matthias Fuchs, 03 May 2005:
  Added missing variable declaration in cmd_nand.c
  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram

297
298
* Fix INKA4x0: use CS1 as gpio_wkup_6 output

299
300
301
302
* Fix bug in the SDRAM initialization code for canmb, IceCube and
  PM520 boards.
  Fix PHY address for canmb board.

303
304
* Cleanup serial console baudrate calculation on AT91RM9200;
  get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
305

306
307
308
309
* Patch by Matthias Fuchs, 18 Apr 2005:
  Make PCI target address spaces on PMC405 and CPCI405 boards
  configurable via environment variables

wdenk's avatar
wdenk committed
310
311
* Auto-size RAM on canmb board.

wdenk's avatar
wdenk committed
312
313
* Add support for canmb board

314
315
316
* Patch by Stefan Roese, 13 Apr 2005:
  Update for esd apc405

wdenk's avatar
wdenk committed
317
318
319
320
321
* Fixes for TQM8560 board:
  - fix clock rates
  - remove debug messages
  - fix flash sector protection

wdenk's avatar
wdenk committed
322
323
324
* Patch by Steven Scholz, 07 Apr 2005:
  Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C

wdenk's avatar
wdenk committed
325
* Patches by Steven Scholz, 07 Apr 2005:
wdenk's avatar
wdenk committed
326
  Fix compiler warning in altera.c
wdenk's avatar
wdenk committed
327
  Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenk's avatar
wdenk committed
328
329
330
331

* Patch by Ladislav Michl, 06 Apr 2005:
  Fix voiceblue configuration.

332
333
334
335
336
337
338
339
340
341
* Patch by Stefan Roese, 06 Apr 2005:
  Updates for OCOTEA board:
  - Changed U-Boot size from 512kByte to 256kByte
  - Fixed flash driver to support boot from soldered user flash
  - Added README for switch from PIBS firmware to U-Boot

* Patch by Travis Sawyer, 05 Apr 2005:
  - Change timer frequency for ppc 440 from 10 ms to 1 ms.
    Problem found by Andrew Wozniak.

wdenk's avatar
wdenk committed
342
343
344
345
* Patch by Steven Scholz, 06 Apr 2005:
  - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
  - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200

346
347
348
349
350
351
352
353
354
355
356
* Patches by Robert Whaley, 29 Nov 2004:
  - update the pxa-regs.h file for PXA27x chips
  - add PXA27x based ADSVIX board
  - add support for MMC on PXA27x processors

* Patch by Andrew E. Mileski, 28 Nov 2004:
  Fix PPC4xx SPD SDRAM detection bug

* Patch by Hiroshi Ito, 26 Nov 2004:
  Fix logic of "test -z" and "test -n" commands

357
358
359
360
361
362
* Patch by Ladislav Michl, 05 Apr 2005:
  Add support for VoiceBlue board.

* Patch by Ladislav Michl, 05 Apr 2005:
  Fix netboot_common() prototypes.

wdenk's avatar
wdenk committed
363
364
365
366
367
368
369
370
* Patch by Steven Scholz, 05 Apr 2005:
  Use i.MX watchdog timer for reset_cpu()

* Patch by Steven Scholz, 05 Apr 2005:
  Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
  subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
  (now in interupts.c)

371
372
373
* Add support for MPC8220 based "sorcery" board.

* Add support for TQM8560 board.
wdenk's avatar
wdenk committed
374

wdenk's avatar
wdenk committed
375
376
377
378
379
380
* Add FEC support for TQM8540 board.
  Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC

* Patch by Martin Krause, 04 Apr 2005:
  Update default configuration for CMC_PU2 board.

wdenk's avatar
wdenk committed
381
382
383
384
385
* Patch by Steven Scholz, 04 Apr 2005:
  - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
  - introduce two new configuration options instead:
    CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT

wdenk's avatar
wdenk committed
386
387
388
* Patch by Steven Scholz, 04 Apr 2005:
  Make sure that MDIO clock does not exceed 2.5 MHz on AT91

389
390
391
* Fix timer code for ARM systems: make sure that udelay() does not
  reset timers so it's save to use udelay() in timeout code.

wdenk's avatar
wdenk committed
392
393
394
395
396
* Patch by Mathias Kster, 23 Nov 2004:
  add udelay support for the mcf5282 cpu

* Patch by Tolunay Orkun, 16 November 2004:
  fix incorrect onboard Xilinx CPLD base address
397

wdenk's avatar
wdenk committed
398
399
400
401
402
403
404
* Patch by Jerry Van Baren, 08 Nov 2004:
  - Add low-boot option for MPC8260ADS board (if lowboot is selected,
    the jumper for the HRCW source should select flash. If lowboot is
    not selected, the jumper for the HRCW source should select the
    BCSR.
  - change default load base address to 0x00400000

wdenk's avatar
wdenk committed
405
406
407
408
409
410
411
412
413
414
415
* Patch by Yuli Barcohen, 08 Nov 2004:
  Add support for Analogue & Micro Rattler boards.
  Tested on Rattler8248.

* Patch by Andre Renaud, 08 Nov 2004:
  Fix watchdog support in common/lcd.c

* Patch by Marc Leeman, 05 Nov 2003:
  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
  bug only affects the XPC8245 processors

wdenk's avatar
wdenk committed
416
417
418
419
420
421
422
* Patches by Josef Wagner, 29 Oct 2004:
  - Add support for MicroSys CPU87 board
  - Add support for MicroSys PM854 board

* Patch by Jian Zhang, 02 Nov 2004:
  Add 16-bit NAND support

wdenk's avatar
wdenk committed
423
424
425
426
427
428
* Patch by Scott McNutt, 01 Nov 2004:
  Add missing NIOS/NIOS2 support for "iminfo" command

* Patch by Detlev Zundel, 29 Oct 2004:
  Add missing NIOS/NIOS2 support for "mkimage" tool.

wdenk's avatar
wdenk committed
429
430
431
* Patch by David Adair, 27 Oct 2004:
  Add missing 440GX SDRAM Controller reset

wdenk's avatar
wdenk committed
432
433
434
* Patch by Steven Scholz, 25 Oct 2004:
  Declare reset_cpu() in include/common.h instead locally

wdenk's avatar
wdenk committed
435
436
437
438
439
440
441
* Patch by Yusdi Santoso, 22 Oct 2004:
  - Add support for HIDDEN_DRAGON board
  - fix endianess problem in driver/rtl1839.c

* Patch by Allen Curtis, 21 Oct 2004:
  support multiple serial ports

442
443
444
445
446
447
448
449
* Patch by Richard Klingler, 03 Apr 2005:
  Add call to eth_halt() in net/net.c when called functions fail
  after eth_init() has been called.

* Patch by Sam Song, 3 April 2005:
  - Update README.Netconsole
  - Update README

wdenk's avatar
wdenk committed
450
451
452
* Prepare for SoC rework of ARM code:
  - rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
  - rename memsetup into lowlevel_init (function name and source files)
wdenk's avatar
wdenk committed
453
454
455
  Patch by Steven Scholz, 03 Apr 2005:
  - create SoC specific directories include/asm-arm/arch-imx and
    include/asm-arm/arch-s3c24x0
wdenk's avatar
wdenk committed
456

wdenk's avatar
wdenk committed
457
458
459
* Fix problems with SNTP support;
  enable SNTP support in some boards.

wdenk's avatar
wdenk committed
460
461
462
* Patches by Martin Krause, 01 Apr 2005:
  - Fix flash erase timeout on CMC_PU2
  - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenk's avatar
wdenk committed
463

wdenk's avatar
wdenk committed
464
465
466
* Patch by Steven Scholz, 13 March 2005:
  fix cache enabling for AT91RM9200

wdenk's avatar
wdenk committed
467
468
469
470
471
472
473
* Patch by Masami Komiya, 30 Mar 2005:
  add SNTP support and expand time server and time offset fields of
  DHCP support. See doc/README.SNTP

* Patch by Steven Scholz, 13 Dec 2004:
  Fix bug in at91rm920 ethernet driver

wdenk's avatar
wdenk committed
474
475
476
477
* Patch by Steven Scholz, 13 Dec 2004:
  Remove duplicated code by merging memsetup.S files for
  at91rm9200 boards into one cpu/at91rm9200/lowlevel.S

wdenk's avatar
wdenk committed
478
479
480
481
482
483
* Patch by Detlev Zundel, 31 Mar 2005:
  Cleanup duplicate definition of overwrite_console()

* Update TQM5200 configuration;
  prepare for Rev. 200 starter kit boards

wdenk's avatar
wdenk committed
484
485
486
487
488
489
490
491
492
493
* Patch by Scott McNutt, 21 Oct 2004:
  Add support for Nios-II EPCS Controller core.

* Patch by Scott McNutt, 20 Oct 2004:
  Nios-II cleanups:
  - Add sysid command (Nios-II only).
  - Locate default exception trampoline at proper offset.
  - Implement I/O routines (readb, writeb, etc)
  - Implement do_bootm_linux

wdenk's avatar
wdenk committed
494
495
496
497
498
499
500
* Patches by Martin Krause, 22 Mar 2005:
  - use TQM5200_auto as MAKEALL target for TQM5200 systems
  - add support for SM501 graphics controller
  - add support for graphic console on TQM5200
  - add support for TQM5200 Rev 200
  - cleanup, fix typo in include/configs/TQM5200.h

wdenk's avatar
wdenk committed
501
502
503
* Patch by Manfred Baral, 17 Mar 2005:
  Fix typo

504
505
506
507
* Fix RTC configuration for PPChameleon board

* Cleanup, fix typo in include/configs/TQM5200.h

508
509
510
* Patch by Stefan Roese, 16 Mar 2005:
  Update for esd auto_update and hh405 board

511
512
* Adapt for U-Boot image size (new features enabled) on TQM5200

513
514
515
516
517
518
* Update code for TQM8540 board (and 85xx in general):
  - Change the name of the Ethernet driver: MOTO ENET -> ENET
  - Reformat boot messages
  - Enable redundant environment
  - Replace the -O2 optimization flag with -mno-string

519
520
521
522
523
* Patch by David Brownell, 10 Mar 2005:
  Restore copyright statements in OHCI drivers.

* Add support for TQM8540 board

wdenk's avatar
wdenk committed
524
525
526
527
* Patch by Detlev Zundel, 14 Mar 2005:
  NC650: changed NAND flash addressing to using UPMB

* Patch by Stefan Roese, 14 Mar 2005:
stroese's avatar
stroese committed
528
529
  Update for esd voh405 fpga image

530
531
532
* INKA4x0: Allow initialization of LCD backlight dimming from
  "brightness" environment variable.

533
534
* Add port initialization for digital I/O on INKA4x0

wdenk's avatar
wdenk committed
535
* Patch by Stefan Roese, 01 Mar 2005:
536
537
  Update for esd boards dp405 and hub405

538
539
540
541
542
* Fix get_partition_info() parameter error in all other calls
  (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).

* Enable USB and IDE support for INKA4x0 board

wdenk's avatar
wdenk committed
543
* Patch by Andrew Dyer, 28 Feb 2005:
544
545
546
  fix ext2load passing an incorrect pointer to get_partition_info()
  resulting in load failure for devices other than 0

547
548
* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board

wdenk's avatar
wdenk committed
549
550
* Cleanup USB and partition defines

551
552
553
554
555
556
557
558
559
* Add support for ext2 filesystems and image timestamps to TQM5200 board

* Add reset code for Coral-P on INKA4x0 board

* Patch by Martin Krause, 28 Jun 2004:
  Update for TRAB board.

* Fix some missing "volatile"s in MPC5xxx FEC driver

560
561
* Fix cirrus voltage detection (for CPC45)

562
563
* Fix byteorder problem in usbboot and scsiboot commands.

wdenk's avatar
wdenk committed
564
565
566
567
568
569
570
* Patch by Cajus Hahn, 04 Feb 2005:
  - don't insist on leading '/' for filename in ext2load
  - set default partition to useful value (1) in ext2load

* Patch by Andrew Dyer, 08 Jan 2005:
  fix wrong return codes in ext2 code

571
572
573
574
575
576
577
578
579
580
581
582
583
584
* Removed '--no-warn-mismatch' option from Makefile. This option
  makes 'ld' to overlook binary objects compatibility.

* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
  --end-group) outside of the group. This will make 'ld' to do
  _multiple_ search in the library group when resolving symbol
  references and do only a _single_ seach in libgcc.a after the group
  search.

* Fix stability problems on CPC45 board again.

* Make image detection for diskboot / usbboot / scsiboot more robust
  (also check header checksum)

wdenk's avatar
wdenk committed
585
586
587
588
* Update CPC45 board configuration.

* Add USB and PCI support for INKA4x0 board

589
590
* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).

wdenk's avatar
wdenk committed
591
592
* Code cleanup

wdenk's avatar
wdenk committed
593
594
595
596
597
598
599
* Patch by Robin Getz, 13 Oct 2004:
  Add standalone application to change SMC91C111 MAC addresses,
  see examples/README.smc91111_eeprom

* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
  Fix Flash support for ARM Integrator CP.

wdenk's avatar
wdenk committed
600
601
602
603
604
605
606
607
608
609
610
611
612
* Patch by Richard Woodruff, 10 Jan 2005:
  Update support for OMAP2420 (ARM11) and H4 board:
  o clean up and add new types to H4 memory probe code.
  o fix to work with internal boot.
  o added PRCM config III operation.
  o fix marginal flash timings.
  o add revison ATAG usage.
  o enable voltage scaling at power chip.
  o fix compile error for i2c.

* Fix network problem (error when receiving multiple ARP packets)

* Patch by Daniel Poirot, 12 Oct 2004:
wdenk's avatar
wdenk committed
613
614
615
616
617
  Add support for Wind River sbc405 board

* Patch by Rainer Brestan, 12 Oct 2004:
  Make examples/Makefile more robust

wdenk's avatar
wdenk committed
618
619
620
621
622
623
624
625
626
* Patch by Sam Song, 11 October 2004:
  - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
  - Adjust CPU:BUS frequency ratio 1:1 when core frequency
    less than 50MHz

* Patch by Sam Song, 10 Oct 2004:
  Fix a parameter error in run_command() in main.c

* Patch by Richard Woodruff, 01 Oct 2004:
627
628
629
630
631
632
  add support for the TI OMAP2420 processor and its H4 reference
  board

* Patch by Christian Pellegrin, 24 Sep 2004:
  Added support for NE2000 compatible (DP8390, DP83902) NICs.

wdenk's avatar
wdenk committed
633
634
635
636
637
638
639
* Patch by Leif Lindholm, 23 Sep 2004:
  add support for the AMD db1550 board

* Patch by Travis Sawyer, 15 Sep 2004:
  Add CONFIG_SERIAL_MULTI support for ppc4xx,
  update README.serial_multi

wdenk's avatar
wdenk committed
640
641
642
643
644
* Patches by David Snowdon, 07 Sep 2004:
  - add u-boot.hex target in the top level Makefile
  - add support for the UNSW/NICTA PLEB 2 board (pleb2)
  - use -mtune=xscale and -march=armv5 options for PXA

wdenk's avatar
wdenk committed
645
646
647
* Patch by Florian Schlote, 08 Sep 2004:
  Add support for SenTec-COBRA5272-board (Coldfire).

wdenk's avatar
wdenk committed
648
649
650
651
652
653
654
* Patch by Gleb Natapov, 07 Sep 2004:
  mpc824x: set PCI latency timer to a sane value
  (is 0 after reset).

* Patch by Kurt Stremerch, 03 Sep 2004:
  Add bitstream configuration option for fpga command (Xilinx only).

655
656
657
658
659
660
661
* Patch by Kurt Stremerch, 03 Sep 2004:
  Add Xilinx Spartan2E family FPGA support

* Patch by Jeff Angielski, 02 Sep 2004:
  Add Added support for H2 revision of the EP8260 board.
  Fixed formatting for some of the EP8260 related source files.

wdenk's avatar
wdenk committed
662
663
664
665
666
667
668
669
670
671
672
673
674
* Patch by Jon Loeliger, 02 Sep 2004:
  Reset monitor size back to 256 so environment can be written
  to flash on MPC85xx ADS and CDS releases.

* Patch by Paolo Broggini, 02 Sep 2004:
  Make BSS clearing on ARM systems more robust

* Patch by Yue Hu and Joe, 01 Sep 2004:
  - add PCI support for ixp425;
  - add EEPRO100 suppor tfor ixdp425 board.

* Fix problem with protected sector detection in driver/cfi_flash.c

wdenk's avatar
wdenk committed
675
======================================================================
wdenk's avatar
wdenk committed
676
Changes for U-Boot 1.1.2:
wdenk's avatar
wdenk committed
677
678
======================================================================

wdenk's avatar
wdenk committed
679
680
681
682
683
684
685
686
687
688
689
690
691
692
* Code cleanup, mostly for GCC-3.3.x

* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Code cleanup

* Add support for CompactFlash for the CPC45 Board.

693
694
* Fix problems with CMC_PU2 flash driver.

695
696
697
698
* Cleanup:
  - avoid trigraph warning in fs/ext2/ext2fs.c
  - rename UC100 -> uc100

wdenk's avatar
wdenk committed
699
700
* Add support for UC100 board

stroese's avatar
stroese committed
701
702
703
704
705
706
707
708
709
710
711
* Patch by Stefan Roese, 16 Dez 2004:
  - ext2fs support added
  - Tundra universe support added
  - Coldfire MCF5249 support added (no preloader needed!)
  - MCF5249 board TASREG added
  - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
    VOM405, WUH405
  - some esd boards updated
  - memory commands "mdc" and "mwc" added for cyclic read/write
    (CONFIG_MX_CYCLIC, see README for further description)

wdenk's avatar
wdenk committed
712
713
* Add support for INKA4X0 board

wdenk's avatar
wdenk committed
714
715
716
* Patch by Steven Scholz, 12 Dec 2004:
  Fix typo in AT91 memory setup.

wdenk's avatar
wdenk committed
717
718
719
720
* Patch by Martin Krause, 27 Oct 2004:
  - add support for "STK52xx" board (including PS/2 multiplexer)
  - add hardware detection for TQM5200

wdenk's avatar
wdenk committed
721
722
723
724
725
726
* Clean up CMC PU2 flash driver

* Update MAINTAINERS file

* Fix bug in MPC823 LCD driver

727
728
729
730
731
732
* Fix udelay() on AT91RM9200 for delays < 1 ms.

* Enable long help on CMC PU2 board;
  fix reset issue;
  increase CPU speed from 179 to 207 MHz.

733
734
735
* Fix smc91111 ethernet driver for Xaeniax board (need to handle
  unaligned tail part specially).

736
737
738
739
740
741
* Update for AT91RM9200DK and CMC_PU2 boards:
  - Enable booting directly from flash
  - fix CMC_PU2 flash driver

* Fix mkimage usage message

wdenk's avatar
wdenk committed
742
743
* Map SRAM on NC650 board

744
745
* Work around for Ethernet problems on Xaeniax board

wdenk's avatar
wdenk committed
746
747
748
749
* Patch by TsiChung Liew, 23 Sep 2004:
  - add support for MPC8220 CPU
  - Add support for Alaska and Yukon boards

750
751
752
753
754
755
* Fix configuration for ERIC board (needs more room)

* Adjust MIPS compiler options at run-time depending on tools version
  ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
  "-mcpu=4kc" for old tools)

756
757
758
* Add passing of the command line and memory size information to  the
  kernel on xaeniax board.

759
760
761
762
763
* Enable NAND flash support for NC650 board.

* Patch by Thomas Lange 07 Oct 2004:
  Updated README for DBAu1x00 boards to match current status

764
765
766
767
768
769
* Patch by Philippe Robin, 28 Sept 2004:
  Fix Flash support for Versatile.

* Patch by Roger Blofeld, 16 Sep 2004:
  Fix timeout for DHCP command retry

770
771
772
773
774
775
* Patch by Pantelis Antoniou, 14 Sep 2004:
  Fix early serial hang when CONFIG_SERIAL_MULTI is defined.

* Patch by Pantelis Antoniou, 14 Sep 2004:
  Kick watchdog when bz-decompressing

776
777
778
* Fix CFG_HZ problems on AT91RM9200 systems
  [Remember: CFG_HZ should be 1000 on ALL systems!]

779
780
781
782
783
784
* Patch by Gridish Shlomi, 30 Aug 2004:
  - Add support to revA version of PQ27 and PQ27E.
  - Reverted MPC8260ADS baudrate back to original 115200

* Patch by Hojin, 17 Sep 2004:
  Fix typo in cfi_flash.c
wdenk's avatar
Cleanup    
wdenk committed
785

786
787
788
789
790
791
792
793
794
* Patch by Mark Jonas, 09 September 2004:
  mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
  error message

* Patch by Mark Jonas, 31 August 2004:
  Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
  improves FTP performance for MPC5200 systems. Enabled for IceCube
  by default.

795
796
797
798
799
800
801
802
* Patch by Michael Bendzick, 30 Aug 2004:
  - Improve platform.S code for omap1510inn that detects whether code
    is running from SDRAM or not. Patch allows SDRAM to be configured
    if code is running out of SRAM at 0x20000000.

* Patch by Frederick Klatt, 30 Aug 2004:
  Add support for the Wind River SBC8540/SBC8560 boards

803
804
805
806
807
808
809
810
811
812
813
* Configure SX1 board to use drivers/cfi_flash.c

* Patches by Michael Bendzick, 30 Aug 2004:
  - Configure omap1510inn board to use drivers/cfi_flash.c
  - Make drivers/cfi_flash.c protect environment and redundant
    environment.

* Patch by Steven Scholz, 23 Jun 2004:
  - Add script (tools/img2brec.sh) to programm U-Boot into
    (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L

wdenk's avatar
wdenk committed
814
815
816
817
818
* Patches by Scott McNutt, 24 Aug 2004:
  - Add support for Altera Nios-II processors.
  - Add support for Psyent PCI-5441 board.
  - Add support for Psyent PK1C20 board.

wdenk's avatar
wdenk committed
819
820
821
822
* Patches by Jon Loeliger, 24 Aug 2004:
  - Add support for the MPC8541 and MPC8555 CDS boards
  - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
  - Convert MPC85xxADS to use common CFI flash driver
wdenk's avatar
wdenk committed
823
824
825
826
  - Fix PCI window on MPC85xx; remove unneeded PCI initialization
    from board_early_init_f()
  - Provide SW workaround for PCI initialization on 85xx CDS

827
828
829
* Patches by George G. Davis, 24 Aug 2004:
  - Enable ramdisk/initrd tagged param support for omap1610h2_config
  - Remove static network setup defaults from mx1ads_config
wdenk's avatar
wdenk committed
830
831
  - update ARM boards to use constants from mach-types.h

wdenk's avatar
wdenk committed
832
833
834
835
* Patch by Gary Jennejohn, 04 Oct 2004:
  - fix I2C on at91rm9200
  - add support for Ricoh RS5C372A RTC

836
837
838
839
840
841
842
* Patch by Gary Jennejohn, 01 Oct 2004:
  - add support for CMC PU2 board
  - add support for I2C on at91rm9200

* Patch by Gary Jennejohn, 28 Sep 2004:
  fix baudrate handling on at91rm9200

wdenk's avatar
wdenk committed
843
844
845
846
847
* Patch by Yuli Barcohen, 22 Aug 2004:
  - remove ZPC.1900 board-specific flash driver;
    switch the port to generic CFI driver;
  - port clean-up

wdenk's avatar
wdenk committed
848
849
850
* Patch by Hinko Kocevar, 21 Aug 2004:
  Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB

851
852
853
854
855
856
857
* Clean up tools/bmp_logo.c to not add trailing white space

* Patch by Hinko Kocevar, 21 Aug 2004:
  - Group common framebuffer functions in common/lcd.c
  - Group common framebuffer macros and #defines in include/lcd.h
  - Provide calc_fbsize() for video ATAG

wdenk's avatar
wdenk committed
858
859
860
861
862
863
* Patch by Sam Song, 21 August 2004:
  - Fix a typo in README
  - Align "(RO)" output for "flinfo" after "protect on"
  - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
    ratio 1:1 when core frequency less than 50MHz

864
* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk's avatar
wdenk committed
865
866
867
  - fix some "use of label at end of compound statement" warnings
  - Define type of LCD panel on lubbock board if CONFIG_LCD is used

wdenk's avatar
wdenk committed
868
869
870
871
872
873
874
* Patch by Steven Scholz, 16 Aug 2004:
  - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
  - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
  - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
  - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
    into cpu/arm920t/$(SOC)/

wdenk's avatar
wdenk committed
875
876
877
878
879
880
881
882
883
884
885
886
* Patches by Sean Chang, 09 Aug 2004:
  - Added support for both 8 and 16 bit mode access to System ACE CF
    through MPU.
  - Fixed missing System ACE CF device during get FAT partition info
    in fat_register_device function.
  - Enabled System ACE CF support on ML300.

* Patch by Sean Chang, 09 Aug 2004:
  Synch defines for saveenv and do_saveenv functions so they get
  compiled under the same statement.

* Patch by Sean Chang, 09 Aug 2004:
wdenk's avatar
wdenk committed
887
888
889
890
891
892
893
894
  - Added I2C support for ML300.
  - Added support for ML300 to read out its environment information
    stored on the EEPROM.
  - Added support to use board specific parameters as part of
    U-Boot's environment information.
  - Updated MLD files to support configuration for new features
    above.

wdenk's avatar
wdenk committed
895
* Patches by Travis Sawyer, 05 Aug 2004:
wdenk's avatar
wdenk committed
896
897
898
899
900
901
902
  - Remove incorrect bridge settings for eth group 6
  - Add call to setup bridge in ppc_440x_eth_initialize
  - Fix ppc_440x_eth_init to reset the phy only if its the
    first time through, otherwise, just check the phy for the
    autonegotiated speed/duplex.  This allows the use of netconsole
  - only print the speed/duplex the first time the phy is reset.

wdenk's avatar
wdenk committed
903
904
905
906
907
908
* Patch by Shlomo Kut, 29 Mar 2004:
  Add support for MKS Instruments "Quantum" board

* Fix build problem with Cogent boards;
  avoid using <asm/byteorder.h> when using the host compiler

wdenk's avatar
wdenk committed
909
910
911
* Patch by Ganapathi C, 04 Aug 2004:
  Fix NFS timeout issue

wdenk's avatar
wdenk committed
912
913
914
915
916
917
918
* Patch by Yuli Barcohen, 19 Jul 2004:
  - Fix host tools building in Cygwin environment
  - Fix header files search order for host tools

* Patch by Tom Armistead, 19 Jul 2004:
  Fix kgdb.S support for 74xx_75x cpu

wdenk's avatar
wdenk committed
919
920
921
* Patch by Jon Loeliger, 15 Jul 2004:
  Fix MPC85xx I2C driver

922
923
* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.

924
925
926
927
928
929
930
* Patch by Stephen Williams, 15 July 2004
  Set the PCI class code for JSE board as part of PCI interface setup

* Patch by Michael Bendzick, 15 Jul 2004:
  Fix problem with writes with odd sizes in drivers/cfi_flash.c when
  CFG_FLASH_USE_BUFFER_WRITE is set

wdenk's avatar
wdenk committed
931
932
933
934
935
936
937
* Patch by Yuli Barcohen, 13 Jul 2004:
  Allow clock setting on MPC866/MPC885 series chips according to
  environment variable `cpuclk'

* Patch by Yuli Barcohen, 20 Apr 2004:
  Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x

wdenk's avatar
wdenk committed
938
939
940
* Patch by Vincent Dubey, 24 Sep 2004:
  Add support for xaeniax board

941
942
943
944
945
* Add comment about non-GPL character of standalone applications to
  COPYING file

* Fix FEC ethernet problem on NSCU board.

wdenk's avatar
wdenk committed
946
947
948
* Patch by Gary Jennejohn, 09 Sep 2004:
  allow to use USART1 as console port on at91rm9200dk boards

stroese's avatar
stroese committed
949
950
951
* Patch by Stefan Roese, 16 Sep 2004:
  Update AR405 board.

952
953
* Fix SysClk handling for PPChameleon and CATcenter boards

wdenk's avatar
wdenk committed
954
955
956
957
958
959
960
961
962
963
* Patch by Detlev Zundel, 08 Sep 2004:
  Update etags build target

* Improve NetConsole support: add support for broadcast destination
  address and buffered input.

* Cleanup compiler warnings for GCC 3.3.x and later

* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch

wdenk's avatar
wdenk committed
964
965
* Add support for IDS "NC650" board

966
967
968
969
970
971
972
973
* Add automatic update support for LWMON board

* Clear Block Lock-Bits when erasing flash on LWMON board.

* Fix return code of "fatload" command

* Enable MSDOS/VFAT filesystem support for LWMON board

wdenk's avatar
wdenk committed
974
975
976
977
978
979
* Patch by Martin Krause, 03 Aug 2004:
  change timing for SM501 graphics controller on TQM5200 module

* Patch by Mark Jonas, 13 July 2004:
  - Total5200 LCD now run in little endian mode. Endianess conversion
    is done in hardware.
wdenk's avatar
wdenk committed
980
  - Removed last reference to "console" environment variable.
wdenk's avatar
wdenk committed
981

wdenk's avatar
wdenk committed
982
983
984
985
986
987
* Patches by Lars Munch, 12 Jul 2004:
  - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
    board specific
  - split out the LXT971A PHY from ns_9750_eth.h
  - split the dm9161 phy part out of at91rm9200_ether.c

wdenk's avatar
wdenk committed
988
989
990
991
992
993
994
* Patch by Andreas Engel, 12 Jul 2004:
  Replaced hardcoded PL011 clock frequency with config variable.
  Fixed wrong CONFIG_CMD_DFL doc.

* Patch by Thomas Viehweger, 09 Jun 2004:
  make it possible to remove chpart when there is only one partition

995
996
997
* Add support for console over UDP (compatible to Ingo Molnar's
  netconsole patch under Linux)

wdenk's avatar
wdenk committed
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
* Patch by Jon Loeliger, 16 Jul 2004:
  - support larger DDR memories up to 2G on the PC8540/8560ADS and
    STXGP3 boards
  - Made MPC8540/8560ADS be 33Mhz PCI by default.
  - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
    and CONFIG_L2_INIT_RAM options.
  - Refactor Local Bus initialization out of SDRAM setup.
  - Re-implement new version of LBC11/DDR11 errata workarounds.
  - Moved board specific PCI init parts out of CPU directory.
  - Added TLB entry for PCI-1 IO Memory
  - Updated README.mpc85xxads

wdenk's avatar
wdenk committed
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

stroese's avatar
stroese committed
1021
1022
1023
* Patch by Stefan Roese, 15 Jul 2004:
  cpu/ppc4xx/sdram.c rewritten now using get_ram_size()

1024
1025
* Fix NSCU config; add ethernet wakeup code.

wdenk's avatar
wdenk committed
1026
* Add link for preloader for Motorola Coldfire to README.m68k
1027

1028
1029
1030
* Patch by Michael Bendzick, 12 Jul 2004:
  fix output formatting in drivers/cfi_flash.c

wdenk's avatar
wdenk committed
1031
1032
1033
* Patch by Mark Jonas, 02 Jul 2004:
  Fix lowboot (again) on MPC5xxx

wdenk's avatar
wdenk committed
1034
1035
1036
* Patch by Curt Brune, 07 Jul 2004:
  relocate exception vectors on arm720t if needed

1037
1038
1039
1040
1041
1042
1043
* Patch by George G. Davis, 06 Jul 2004:
  - update mach-types.h to latest arm.linux.org.uk master list
  - Set correct OMAP1610 bi_arch_number for build target

* Patch by Curt Brune, 06 Jul 2004:
  evb4510: add support for timer interrupt; cleanup

wdenk's avatar
wdenk committed
1044
1045
1046
1047
1048
* Patch by Dan Poirot, 06 Jul 2004:
  Fix sbc8260 environment variables

* Cleanup redundand "console" environment variable

wdenk's avatar
wdenk committed
1049
1050
1051
1052
1053
1054
1055
* Patch by Mark Jonas, 05 Jul 2004:
  add support for the Total5100's and Total5200's LCD screen

* Patches by Dan Eisenhut, 01 Jul 2004:
  - README fixes.
  - Move doc2000.h include to prevent compiler warning on some boards

wdenk's avatar
wdenk committed
1056
1057
1058
1059
* Patch by Mark Jonas, 01 Jul 2004:
  Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
  MGT5100 and MPC5200 based Freescale platforms.

1060
1061
1062
1063
1064
1065
* Patch by Philippe Robin, 01 Jul 2004:
  Add initialization for Integrator and versatile board files.

* Patch by Hinko Kocevar, 01 Jun 2004:
  Fix VFD FB allocation, add LCD FB allocation on ARM

wdenk's avatar
wdenk committed
1066
1067
1068
1069
1070
1071
* Patch by Martin Krause, 30 Jun 2004:
  Add support for TQM5200 board

* Patch by Martin Krause, 29 Jun 2004:
  Add loopw command: infinite write loop on address range

wdenk's avatar
wdenk committed
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
* Patches by Yasushi Shoji, 29 Jun 2004:
  - add empty include/asm-microblaze/processor.h
  - add to CREDITS and MAINTAINERS
  - add gd initialization
  - add MicroBlaze and SUZAKU board to MAKEALL script
  - add reset support for SUZAKU
  - add flush_cache() for MicroBlaze
  - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
    size flash memory on SUZAKU

wdenk's avatar
wdenk committed
1082
1083
1084
1085
1086
1087
* Patch by Prakash Kumar, 27 Jun 2004:
  Add support for the PXA250 based Intrinsyc Cerf board.

* Patch by Yasushi Shoji, 27 Jun 2004:
  fix comment in include/common.h

1088
1089
1090
1091
1092
1093
1094
1095
1096
* Rename SBC8560 into sbc8560 for consistency

* Patch by Daniel Poirot, 24 Jun 2004:
  Add support for Wind River's sbc8240 board

* Patches by Yasushi Shoji, 26 Jun 2004:
  - drivers/serial_xuartlite.c: fix "return 0" in void function
  - add microblaze support to mkimage tool

wdenk's avatar
wdenk committed
1097
* Patch by Fred Klatt, 25 Jun 2004:
1098
  Add support for WindRiver's sbc8560 board
wdenk's avatar
wdenk committed
1099
1100
1101
1102
1103
1104
1105
1106
1107

* Patch by Nicolas Lacressonniere, 24 Jun 2004
  Small Bugs fixes for "at91rm9200dk" board:
  - Timing modifications for SPI DataFlash access
  - Fix NAND flash detection bug

* Patch by Nicolas Lacressonniere, 24 Jun 2004:
  Add Support for Flash AT49BV6416 for AT91RM9200DK board

wdenk's avatar
wdenk committed
1108
1109
1110
1111
1112
1113
1114
* Patch by Jon Loeliger, 17 June 2004:
  Completion of the 8540ADS/8560ADS updates:
  Fix some PCI and Rapid I/O memory maps,
  Initialize both TSEC 1 and 2,
  Initialize SDRAM
  Update MAINTAINER for 85xx boards and README.mpc85xxads

wdenk's avatar
wdenk committed
1115
1116
1117
1118
1119
1120
1121
* Patch by Yuli Barcohen, 16 Jun 2004:
  Remove obsolete AdderII port which was superseded by unified
  AdderII/Adder87x port

* Patch by Ladislav Michl, 16 Jun 2004:
  Fix gcc-3.3.3 warnings for smc91111.c

stroese's avatar
stroese committed
1122
1123
1124
1125
* Patch by Stefan Roese, 02 Jul 2004:
  - Fix bug in 405 ethernet driver; allocated data not cleared!
  - Fix problem in 405 i2c driver; don't try to print without console!

wdenk's avatar
wdenk committed
1126
1127
1128
* Patch by Paul Ruhland, 11 Jun 2004:
  Remove debug code from 'board/lpd7a40x/flash.c'

wdenk's avatar
wdenk committed
1129
1130
1131
1132
1133
1134
* Patch by Andrea Marson, 11 Jun 2004:
  Update for PPChameleon board:
  - support for SysClk @ 25MHz
  - support for Silicon Motion SM712 VGA controller
  - some clean ups

1135
1136
1137
1138
* Patches by Richard Woodruff, 10 Jun 2004:
  - fix problems with examples/stubs.c for GCC >= 3.4
  - fix problems with gd initialization

wdenk's avatar
wdenk committed
1139
1140
1141
1142
1143
1144
1145
1146
1147
* Patch by Curt Brune, 17 May 2004:
  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
  - Add support for ESPD-Inc. EVB4510 Board

* Patch by Marc Leeman, 11 May 2004:
  Fix for MPC8245 - reading PPC Memory from another device with the
  PPC as PCI target device corrupts data due to interenal hardware
  buffering.

1148
1149
1150
1151
1152
* Fix "cls" command when used with splash screen

* Increase NFS download timeout (now 1 min - 10 sec is to short for a
  slow download of a big image)

1153
1154
1155
* Add "cls" function to MPC823 LCD driver so we can reinitialize the
  display even after showing a bitmap

wdenk's avatar
wdenk committed
1156
1157
1158
1159
1160
1161
1162
1163
1164
* Patch by Josef Wagner, 04 Jun 2004:
  - DDR Ram support for PM520 (MPC5200)
  - support for different flash types (PM520)
  - USB / IDE / CF-Card / DiskOnChip support for PM520
  - 8 bit boot rom support for PM520/CE520
  - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
  - I2C and RTC support for CPC45
  - support of new flash type (28F160C3T) for CPC45

1165
1166
1167
1168
* Fix flash parameters passed to Linux for PPChameleon board

* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.

wdenk's avatar
wdenk committed
1169
* Patch by Paul Ruhland, 10 Jun 2004:
wdenk's avatar
wdenk committed
1170
  fix support for Logic SDK-LH7A404 board and clean up the
wdenk's avatar
wdenk committed
1171
1172
1173
1174
1175
  LH7A404 register macros.

* Patch by Matthew McClintock, 10 Jun 2004:
  Modify code to select correct serial clock on Sandpoint8245

1176
1177
1178
1179
1180
1181
* Patch by Robert Schwebel, 10 Jun 2004:
  Add support for Intel K3 strata flash.

* Patch by Thomas Brand, 10 Jun 2004:
  Fix "loads" command on DK1S10 board

wdenk's avatar
wdenk committed
1182
1183
1184
1185
* Patch by Yuli Barcohen, 09 Jun 2004:
  Add support for 8MB flash SIMM and JFFS2 file system on
  Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).

wdenk's avatar
wdenk committed
1186
1187
1188
1189
1190
1191
* Patch by Yuli Barcohen, 09 Jun 2004:
  Add support for Analogue&Micro Adder87x and the older AdderII board.

* Patch by Ming-Len Wu, 09 Jun 2004:
  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board

wdenk's avatar
wdenk committed
1192
1193
1194
1195
1196
* Patch by Sam Song, 09 Jun 2004:
  - Add support for RPXlite_DW board
  - Update FLASH driver for 4*AM29DL323DB90VI
  - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board

wdenk's avatar
wdenk committed
1197
1198
1199
1200
1201
1202
1203
* Patch by Mark Jonas, 08 June 2004:
  - Make MPC5200 boards evaluate the SVR to print processor name and
    version in checkcpu() (cpu/mpc5xxx/cpu.c).

* Patch by Kai-Uwe Bloem, 06 May 2004:
  Fix endianess problem in cramfs code

wdenk's avatar
wdenk committed
1204
1205
1206
1207
1208
1209
1210
1211
* Patch by Tom Armistead, 04 Jun 2004:
  Add support for MAX6900 RTC

* Patches by Ladislav Michl, 03 Jun 2004:
  - fix cfi_flash.c on LE systems
  - let 'make mrproper' delete u-boot.img as well
  - turn printf into debug in cfi_flash.c

wdenk's avatar
wdenk committed
1212
1213
1214
* Patch by Kurt Stremerch, 28 May 2004:
  Add support for Exys XSEngine board

wdenk's avatar
wdenk committed
1215
1216
1217
1218
1219
1220
* Patch by Martin Krause, 27 May 2004:
  Fix a MPC5xxx I2C timing issue in i2c_probe().

* Patch by Leif Lindholm, 27 May 2004:
  Fix board_init_f() for dbau1x00 board.

wdenk's avatar
wdenk committed
1221
1222
1223
1224
1225
1226
1227
1228
* Patch by Imre Deak, 26 May 2004:
  On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
  Set flash base accordingly, and decide whether to do or skip board
  specific setup steps.

* Patch by Josef Baumgartner, 26 May 2004:
  Add missing define in include/asm-m68k/global_data.h

1229
1230
1231
1232
1233
1234
* Patch by Josef Baumgartner, 25 May 2004:
  Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c

* Patch by Paul Ruhland, 24 May 2004:
  fix SDRAM initialization for LPD7A400 board.

wdenk's avatar
wdenk committed
1235
1236
1237
* Patch by Jian Zhang, 20 May 2004:
  add support for environment in NAND flash

wdenk's avatar
wdenk committed
1238
1239
1240
1241
1242
1243
* Patch by Yuli Barcohen, 20 May 2004:
  Add support for Interphase iSPAN boards.

* Patches by Paul Ruhland, 17 May 2004:
  - Add I/O functions to the smc91111 ethernet driver to support the
    Logic LPD7A40x boards.
wdenk's avatar
wdenk committed
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
  - Add support for the Logic Zoom LH7A40x based SDK board(s),
    specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2

wdenk's avatar
wdenk committed
1254
1255
1256
* Patch by Tolunay Orkun, 14 May 2004:
  Add support for Cogent CSB472 board (8MB Flash Rev)

1257
1258
1259
1260
1261
1262
* Patch by Thomas Viehweger, 14 May 2004:
  - flash.h: more flash types added
  - immap_8260.h: some bits added (useful for RMII)
  - cmd_coninfo.c: typo corrected, printf -> puts
  - reduced size by replacing spaces with tab

wdenk's avatar
wdenk committed
1263
1264
1265
* Patch by Robert Schwebel, 13 May 2004:
  Add 'imgextract' command: extract one part of a multi file image.

wdenk's avatar
wdenk committed
1266
* Patches by Jon Loeliger, 11 May 2004:
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
  Dynamically handle REV1 and REV2 MPC85xx parts.
    (Jon Loeliger, 10-May-2004).
  New consistent memory map and Local Access Window across MPC85xx line.
  New CCSRBAR at 0xE000_0000 now.
  Add RAPID I/O memory map.
  New memory map in README.MPC85xxads
    (Kumar Gala, 10-May-2004)
  Better board and CPU identification on MPC85xx boards at boot.
    (Jon Loeliger, 10-May-2004)
  SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
  Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
    (Jim Robertson, 10-May-2004)
  Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
  Supports multiple PHYs.
    (Andy Fleming, 10-May-2004)
  Some README.MPC85xxads updates.
    (Kumar Gala, 10-May-2004)
  Copyright updates for "Freescale"
    (Andy Fleming, 10-May-2004)

1287
1288
1289
1290
* Patch by Stephen Williams, 11 May 2004:
  Add flash support for ST M29W040B
  Reduce JSE specific flash.c to remove dead code.

wdenk's avatar
wdenk committed
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
* Patch by Markus Pietrek, 04 May 2004:
  Fix clear_bss code for ARM systems (all except s3c44b0 which
  doesn't clear BSS at all?)

* Fix "ping" problem on INC-IP board. Strange problem:
  Sometimes the store word instruction hangs while writing to one of
  the Switch registers, but only if the next instruction is 16-byte
  aligned. Moving the instruction into a separate function somehow
  makes the problem go away.

1301
1302
1303
1304
1305
1306
1307
* Patch by Rishi Bhattacharya, 08 May 2004:
  Add support for TI OMAP5912 OSK Board

* Patch by Sam Song May, 07 May 2004:
  Fix typo of UPM table for rmu board

* Patch by Pantelis Antoniou, 05 May 2004:
1308
1309
1310
  - Intracom board update.
  - Add Codec POST.

1311
1312
1313
* Add support for the second Ethernet interface for the 'PPChameleon'
  board.

wdenk's avatar
wdenk committed
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
* Patch by Dave Peverley, 30 Apr 2004:
  Add support for OMAP730 Perseus2 Development board

* Patch by Alan J. Luse, 29 Apr 2004:
  Fix flash chip-select (OR0) option register setting on FADS boards.

* Patch by Alan J. Luse, 29 Apr 2004:
  Report MII network speed and duplex setting properly when
  auto-negotiate is not enabled.

* Patch by Jarrett Redd, 29 Apr 2004:
  Fix hang on reset on Ocotea board due to flash in wrong mode.

wdenk's avatar
wdenk committed
1327
1328
1329
1330
1331
1332
* Patch by Dave Peverley, 29 Apr 2004:
  add MAC address detection to smc91111 driver

* Patch by David Mller, 28 Apr 2004:
  fix typo in lib_arm/board.c

wdenk's avatar
wdenk committed
1333
1334
1335
1336
1337
* Patch by Tolunay Orkun, 20 Apr 2004:
  - README update: add CONFIG_CSB272 and csb272_config
  - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
    i2cfast environment variable

wdenk's avatar
wdenk committed
1338
1339
1340
1341
1342
1343
* Patch by Yuli Barcohen, 19 Apr 2004:
  - Rename DUET_ADS to MPC885ADS
  - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
  - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
  - Clean up FADS family port to use the new defines

wdenk's avatar
wdenk committed
1344
1345
* Fix PCI support on CPC45 board

wdenk's avatar
wdenk committed
1346
1347
1348
1349
1350
1351
* Patch by Scott McNutt, 25 Apr 2004:
  Add Nios GDB/JTAG Console support:
  - Add stubs to support gdb via JTAG.
  - Add support for console over JTAG.
  - Minor cleanup.

1352
1353
* Add support for CATcenter board (based on PPChameleon ME module)

wdenk's avatar
wdenk committed
1354
1355
1356
1357
1358
* Patch by Klaus Heydeck, 12 May 2004:
  Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
  load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
  various changes to KUP4 board specific files

wdenk's avatar
wdenk committed
1359
1360
1361
1362
1363
* Fix minor network problem on MPC5200: need some delay between
  resetting the PHY and sending the first packet. Implemented in a
  "natural" way by invoking the PHY reset and initialization code
  only once after power on vs. each time the interface is brought up.

1364
1365
1366
1367
* Add some limited support for low-speed devices to SL811 USB controller
  (at least "usb reset" now passes successfully and "usb info" displays
  correct information)

1368
1369
1370
* Change init sequence for multiple network interfaces: initialize
  on-chip interfaces before external cards.

1371
1372
1373
1374
* Fix memory leak in the NAND-specific JFFS2 code

* Fix SL811 USB controller when attached to a USB hub

1375
1376
1377
1378
1379
* Fix config option spelling in PM520 config file

* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
  patches by Pantelis Antoniou, 30 Mar 2004)

wdenk's avatar
wdenk committed
1380
1381
1382
1383
1384
1385
1386
1387
1388
* Fix minor NAND JFFS2 related issue

* Fixes for SL811 USB controller:
  - implement workaround for broken memory stick
  - improve error handling

* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
  cope with congested networks.

1389
1390
1391
======================================================================
Changes for U-Boot 1.1.1:
======================================================================
wdenk's avatar
wdenk committed
1392

1393
1394
1395
* Patch by Travis Sawyer, 23 Apr 2004:
  Fix VSC/CIS 8201 phy descrambler interoperability timing due to
  errata from Vitesse Semiconductor.
1396
1397

* Patch by Philippe Robin, 22 Apr 2004:
wdenk's avatar
wdenk committed
1398
  Fix ethernet configuration for "versatile" board
1399
1400
1401
1402
1403
1404
1405
1406

* Patch by Kshitij Gupta, 21 Apr 2004:
  Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards

* Patch by Steven Scholz, 24 Feb 2004:
  Fix a bug in AT91RM9200 ethernet driver:
  The MII interface is now initialized before accessing the PHY.

wdenk's avatar
wdenk committed
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
* Patch by John Kerl, 19 Apr 2004:
  Use U-boot's miiphy.h for PHY register names, rather than
  introducing a new header file.

* Update pci_ids.h from linux-2.4.26

* Patch by Masami Komiya, 19 Apr 2004:
  Fix problem cause by VLAN function on little endian architecture
  without VLAN environment

1417
* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenk's avatar
wdenk committed
1418
  binary image for all clock frequencies. Implement run-time
1419
1420
1421
  optimization of flash access timing based on the actual bus
  frequency.

1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
* Modify KUP4X board configuration to use SL811 driver for USB memory
  sticks (including FAT / VFAT filesystem support)

* Add SL811 Host Controller Interface driver for USB

* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README

* Patch by Pantelis Antoniou, 19 Apr 2004:
  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
  Minor patches for Intracom boards.

* Patch by Christian Pell, 19 Apr 2004:
  cleanup support for CF/IDE on PCMCIA for PXA25X

1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
* Temporarily disabled John Kerl's extended MII command code because
  "miivals.h" is missing

* Patches by Mark Jonas, 13 Apr 2004:
  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
  - Add sync instructions to IceCube SDRAM init code
  - Move SDRAM chip constants into seperate include files
  - Unify DDR and SDR initialization code
  - Unify all IceCube (Lite5xxx) target names

wdenk's avatar
wdenk committed
1446
1447
1448
1449
1450
1451
1452
1453
* Patch by John Kerl, 16 Apr 2004:
  Enable ranges in mii command, e.g. mii read 0-1f 0 or
  mii read 4-7 18-1a.  Also add mii dump subcommand for
  pretty-printing standard regs 0-5.

* Patch by  Stephen Williams, 16 April 2004:
  fix typo in JSE.h; update MAINTAINERS

1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
* Patch by Matthew S. McClintock, 14 Apr 2004:
  fix initdram function for utx8245 board

* Patch by Markus Pietrek, 14 Apr 2004:
  use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag

* Patch by Reinhard Meyer, 18 Apr 2004:
  provide the IDE Reset Function for EMK 5200 boards

* Patch by Masami Komiya, 12 Apr 2004:
  fix pci_hose_write_config_{byte,word}_via_dword problems

wdenk's avatar
wdenk committed
1466
1467
1468
1469
1470
1471
1472
1473
1474
* Patch by Sangmoon Kim, 12 Apr 2004:
  Update max RAM size for debris board

* Patch by Travis Sawyer, 08 Apr 2004:
  Add TLB entry for second DIMM slot on ocotea

* Patch by Masami Komiya, 08 Apr 2004:
  add RTL8169 network driver

wdenk's avatar
wdenk committed
1475
1476
1477
1478
1479
1480
1481
* Patch by Dan Malek, 07 Apr 2004:
  - Add support for RPC/STx GP3, Motorola 8560 board
  - Update 85xx TSEC driver so it searches MII for first available PHY
    and uses that one.
  - Add functions to support console MII commands.

* Patch by Tolunay Orkun, 07 Apr 2004:
wdenk's avatar
wdenk committed
1482
  Move initialization of bi_iic_fast[]
wdenk's avatar
wdenk committed
1483
1484
1485
1486
1487
1488
1489
1490
  from board_init_f() to board_init_r()

* Patch by Yasushi Shoji, 07 Apr 2004:
  Cleanup microblaze port

* Patch by Sangmoon Kim, 07 Apr 2004:
  Add auto SDRAM module detection for Debris board

wdenk's avatar
wdenk committed
1491
1492
1493
1494
* Patch by Rune Torgersen, 06 Apr 2004:
  - Fix some PCI problems on the MPC8266ADS board
  - Fix the location of some PCI entries in the immap structure

wdenk's avatar
wdenk committed
1495
1496
1497
1498
* Patch by Yasushi Shoji, 07 Apr 2004:
  - add support for microblaze processors
  - add support for AtmarkTechno "suzaku" board

1499
1500
1501
1502
1503
1504
* Configure PPChameleon board to use redundand environment in flash

* Configure PPChameleon board to use JFFS2 NAND support.

* Added support for JFFS2 filesystem (read-only) on top of NAND flash

wdenk's avatar
wdenk committed
1505
1506
* Patch by Rune Torgersen, 16 Apr 2004:
  LBA48 fixes
1507

1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
* Patches by Pantelis Antoniou, 16 Apr 2004:
  - add support for a new version of an Intracom board and fix
    various other things on others.
  - add verify support to the crc32 command (define
    CONFIG_CRC32_VERIFY to enable it)
  - fix FEC driver for MPC8xx systems:
    1. fix compilation problems for boards that use dynamic
       allocation of DPRAM
    2. shut down FEC after network transfers
  - HUSH parser fixes:
    1. A new test command was added. This is a simplified version of
       the one in the bourne shell.
    2. A new exit command was added which terminates the current
       executing script.
    3. Fixed handing of $? (exit code of last executed command)
wdenk's avatar
wdenk committed
1523
1524
  - Fix some compile problems;
    add "once" functionality for the netretry variable
1525

1526
1527
1528
* Patch by George G. Davis, 02 Apr 2004:
  add support for Intel Assabet board

1529
1530
1531
1532
1533
1534
* Patch by Stephen Williams, 01 Apr 2004:
  Add support for Picture Elements JSE board

* Patch by Christian Pell, 01 Apr 2004:
  Add CompactFlash support for PXA systems.

1535
1536
1537
* Patches by Pantelis Antoniou, 30 Mar 2004:
  - add auto-complete support to the U-Boot CLI
  - add support for NETTA and NETPHONE boards; fix NETVIA board
1538
1539
1540
1541
  - add support for the Epson 156x series of graphical displays
    (These displays are serial and not suitable for using a normal
    framebuffer console on them)
  - add infrastructure needed in order to POST any DSPs in a board
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
  - improve and fix various things in the MPC8xx FEC driver:
    1. The new 87x and 88x series of processors have two FECs,
       and the new driver supports them both.
    2. Another change in the 87x/88x series is support for
       the RMII (Reduced MII) interface. However numerous
       changes are needed to make it work since the PHYs
       are connected to the same lines. That means that
       you have to address them correctly over the MII
       interface.
    3. We now correctly match the MII/RMII interface
       configuration to what the PHY reports.
1553
1554
1555
1556
1557
1558
1559
  - Fix problem when readingthe MII status register. Due to the
    internal design of many PHYs you have to read the register
    twice. The problem is more apparent in 10Mbit mode.
  - add new mode ".jffs2s" for reading from a NAND device: it just
    skips over bad blocks.
  - add networking support for VLANs (802.1q), and CDP (Cisco
    Discovery Protocol)
1560
  - some minor patches / cleanup
1561
1562
1563
1564
1565
1566

* Patch by Yuli Barcohen, 28 Mar 2004:
  - Add support for MPC8272 family including MPC8247/8248/8271/8272
  - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
  - Change configuration method for MPC8260ADS family

1567
1568
* add startup code to clear the BSS of standalone applications

1569
1570
* Fix if / elif handling bug in HUSH shell

1571
======================================================================
wdenk's avatar
wdenk committed
1572
Changes for U-Boot 1.1.0:
1573
1574
======================================================================

1575
1576
1577
1578
1579
* Patch by Mark Jonas: Remove config.tmp files only when
  unconfiguring the board

* Adapt RMU board for bigger flash memory

wdenk's avatar
wdenk committed
1580
1581
1582
* Patch by Klaus Heydeck, 13 Mar 2003:
  Add support for KUP4X Board

wdenk's avatar
wdenk committed
1583
1584
1585
1586
1587
1588
1589
* Patch by Pavel Bartusek, 21 Mar 2004
  Add Reiserfs support

* Patch by Hinko Kocevar, 20 Mar 2004
  - Add auto-release for SMSC LAN91c111 driver
  - Add save/restore of PTR and PNR regs as suggested in datasheet

1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
* Patch by Stephen Williams, 19 March 2004
  Increase speed of sector reads from SystemACE,
  shorten poll timeout and remove a useless reset

* Patch by Tolunay Orkun, 19 Mar 2004:
  Make GigE PHY 1000Mbps Speed/Duplex detection conditional
  (CONFIG_PHY_GIGE)

* Patch by Brad Kemp, 18 Mar 2004:
  prevent machine checks during a PCI scan

* Patch by Pierre Aubert, 18 Mar 2004:
  Fix string cleaning in IDE identification

wdenk's avatar
wdenk committed
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
* Patch by Pierre Aubert, 18 Mar 2004:
  - Unify video mode handling for Chips & Technologies 69000 Video
    chip and Silicon Motion SMI 712/710/810 Video chip
  - Add selection of the video output (CRT or LCD) via 'videoout'
    environment variable for the Silicon Motion
  - README update

* Patch by Pierre Aubert, 18 Mar 2004:
  include/common.h typo fix

* Patches by Tolunay Orkun, 17 Mar 2004:
  - Add support for bd->bi_iic_fast[] initialization via environment
    variable "i2cfast" (CONFIG_I2CFAST)
  - Add "i2cfast" u-boot environment variable support for csb272

wdenk's avatar
wdenk committed
1619
1620
1621
1622
1623
1624
1625
* Patch by Carl Riechers, 17 Mar 2004:
  Ignore '\0' characters in console input for use with telnet and
  telco pads.

* Patch by Leon Kukovec, 17 Mar 2004:
  typo fix for strswab prototype #ifdef

1626
1627
1628
1629
1630
1631
1632
1633
* Patches by Thomas Viehweger, 16 Mar 2004:
  - show PCI clock frequency on MPC8260 systems
  - add FCC_PSMR_RMII flag for HiP7 processors
  - in do_jffs2_fsload(), take load address from load_addr if not set
    explicit, update load_addr otherwise
  - replaced printf by putc/puts when no formatting is needed
    (smaller code size, faster execution)

1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
* Patch by Phillippe Robin, 16 Mar 2004:
  avoid dereferencing NULL pointer in lib_arm/armlinux.c

* Patch by Stephen Williams, 15 Mar 2004:
  Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation

* Patch by Tolunay Orkun, 15 Mar 2004:
  Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()

* Patch by Travis Sawyer, 15 Mar 2004:
  Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port

1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
* Add start-up delay to make sure power has stabilized before
  attempting to switch on USB on SX1 board.

* Patch by Josef Wagner, 18 Mar 2004:
  - Add support for MicroSys XM250 board (PXA255)
  - Add support for MicroSys PM828 board (MPC8280)
  - Add support for 32 MB Flash on PM825/826
  - new SDRAM refresh rate for PM825/PM826
  - added support for MicroSys PM520 (MPC5200)
  - replaced Query by Identify command in CPU86/flash.c
    to support 28F160F3B

* Fix wrap around problem with udelay() on ARM920T

* Add support for Macronix flash on TRAB board

wdenk's avatar
wdenk committed
1662
1663
1664
1665
1666
1667
1668
* Patch by Pierre Aubert, 15 Mar 2004:
  Fix buffer overflow in IDE identification

* Fix power-off of LCD for out-of-band temperatures on LWMON board

* Remove redundand #define in IceCube.h

wdenk's avatar
wdenk committed
1669
1670
1671
1672
1673
1674
1675
* Patch by Steven Scholz, 27 Feb 2004:
  - Adding get_ticks() and get_tbclk() for AT91RM9200
  - Many white space fixes in cpu/at91rm9200/interrupts.c

* Patches by Steven Scholz, 20 Feb 2004:
  some cleanup in AT91RM9200 related code

1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
* Patches by Travis Sawyer, 12 Mar 2004:
  - Fix Gigabit Ethernet support for 440GX
  - Add Gigabit Ethernet Support to MII PHY utilities

* Patch by Brad Kemp, 12 Mar 2004:
  Fixes for drivers/cfi_flash.c:
  - Better support for x8/x16 implementations
  - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
  - Added defines for AMD command and address constants

* Patch by Leon Kukovec, 12 Mar 2004:
  Fix get_dentfromdir() to correctly handle deleted dentries
1688

1689
1690
1691
1692
1693
1694
1695
* Patch by George G. Davis, 11 Mar 2004:
  Remove hard coded network settings in TI OMAP1610 H2
  default board config

* Patch by George G. Davis, 11 Mar 2004:
  add support for ADS GraphicsClient+ board.

wdenk's avatar
wdenk committed
1696
* Patch by Pierre Aubert, 11 Mar 2004:
wdenk's avatar
wdenk committed
1697
1698
1699
1700
1701
1702
1703
1704
1705
  - add bitmap command and splash screen support in cfb console
  - add [optional] origin in the bitmap display command

* Patch by Travis Sawyer, 11 Mar 2004:
  Fix ocotea board early init interrupt setup.

* Patch by Thomas Viehweger, 11 Mar 2004:
  Remove redundand code; add  PCI-specific bits to include/mpc8260.h

wdenk's avatar
wdenk committed
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
* Patch by Stephan Linz, 09 Mar 2004
  - Add support for the SSV ADNP/ESC1 (Nios Softcore)

* Patch by George G. Davis, 9 Mar 2004:
  fix recent build failure for SA1100 target

* Patch by Travis Sawyer, 09 Mar 2004:
  Support native interrupt mode for the IBM440GX.
  Previously it was running in 440GP compatibility mode.

1716
1717
1718
1719
1720
1721
1722
1723
* Patch by Philippe Robin, 09 Mar 2004:
  Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
  Platform support.

* Patch by Masami Komiya, 08 Mar 2004:
  Don't overwrite server IP address or boot file name
  when the boot server does not return values

wdenk's avatar
wdenk committed
1724
* Patch by Tolunay Orkun, 5 Mar 2004:
1725
1726
  Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC

wdenk's avatar
wdenk committed
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
* Patch by Tolunay Orkun, 5 Mar 2004:
  Fix early board initialization for Cogent CSB272 board

* Patch by Ed Okerson, 3 Mar 2004:
  fix CFI flash writes for little endian systems

* Patch by Reinhard Meyer, 01 Mar 2004:
  generalize USB and IDE support for MPC5200 with according
  changes to IceCube.h and TOP5200.h
  add Am29LV256 256 MBit FLASH support for TOP5200 boards
  add info about USB and IDE to README

wdenk's avatar
wdenk committed
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
* Patch by Yuli Barcohen, 4 Mar 2004:
  Fix problems with GCC 3.3.x which changed handling of global
  variables explicitly initialized to zero (now in .bss instead of
  .data as before).

* Patch by Leon Kukovec, 02 Mar 2004:
  add strswab() to fix IDE LBA capacity, firmware and model numbers
  on little endian machines

* Patch by Masami Komiya, 02 Mar 2004:
  - Remove get_ticks() from NFS code
  - Add verification of RPC transaction ID

* Patch by Pierre Aubert, 02 Mar 2004:
  cleanup for IDE and USB drivers for MPC5200

* Patch by Travis Sawyer, 01 Mar 2004:
wdenk's avatar
wdenk committed
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
  Ocotea:
  - Add IBM PPC440GX Ref Platform support (Ocotea)
    Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
    Adapted to U-Boot and 440GX port
  440gx_enet.c:
  - Add gracious handling of all Ethernet Pin Selections for 440GX
  - Add RGMII selection for Cicada CIS8201 Gigabit PHY
  ppc440.h:
  - Add needed bit definitions
  - Fix formatting

* Patch by Carl Riechers, 1 Mar 2004:
  Add PPC440GX prbdv0 divider to fix memory clock calculation.

* Patch by Stephan Linz, 27 Feb 2004
  - avoid problems for targets without NFS download support

1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
* Patch by Rune Torgersen, 27 Feb 2004:
  - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
  - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
  - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)

* Patch by Masami Komiya, 27 Feb 2004:
  Fix rarpboot: add autoload by NFS

* Patch by Dan Eisenhut, 26 Feb 2004:
  fix flash_write return value in saveenv

* Patch by Stephan Linz, 11 Dec 2003
  expand config.mk to avoid trigraph warnings on NIOS

* Rename "BMS2003" board into "HMI10"

1789
1790
1791
* SX1 patches: use "serial#" for USB serial #; use redundand environment
  storage; auto-set console on USB port (using preboot command)

1792
1793
1794
* Add support for SX1 mobile phone; add support for USB-based console
  (enable with "setenv stdout usbtty; setenv stdin usbtty")

1795
1796
* Fix LOWBOOT configuration for MPC5200 with DDR memory

1797
1798
1799
1800
1801
1802
* Fix SDRAM timings for LITE5200 / IceCube board

* Handle Auti-MDIX / connection status for INCA-IP

* Fix USB problems when attempting to read 0 bytes

wdenk's avatar
wdenk committed
1803
1804
1805
1806
1807
* Patch by Travis Sawyer, 26 Feb 2004:
  Fix broken compile for XPEDITE1K target.

* Patch by Stephan Linz, 26 Feb 2004:
  Bug fix for NFS code on NIOS targets
1808

wdenk's avatar
wdenk committed
1809
1810
1811
* Patch by Stephen Williams, 26 Feb 2004:
  Break up SystemACE reads of large block counts

wdenk's avatar
wdenk committed
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
* Patch by Pierre Aubert, 26 Feb 2004
  add IDE support for MPC5200

* Patch by Masami Komiya, 26 Feb 2004:
  add autoload via NFS

* Patch by Stephen Williams
  Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
  elsewhere in the source.

wdenk's avatar
wdenk committed
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
* Patch by Steven Scholz, 25 Feb 2004:
  - Timeouts in FPGA code should be based on CFG_HZ
  - Minor cleanup in code for Altera FPGA ACEX1K

* Patch by Steven Scholz, 25 Feb 2004:
  Changed "Directory Hierarchy" section in README

* Patch by Masami Komiya, 25 Feb 2004:
  Reduce copy count in nfs_read_reply() of NFS code

1832
1833
1834
* Patch by Markus Pietrek, 24 Feb 2004:
  NS9750 DevBoard added

wdenk's avatar
wdenk committed
1835
* Patch by Pierre Aubert, 24 Feb 2004
1836
1837
1838
1839
1840
1841
1842
1843
  add USB support for MPC5200

* Patch by Steven Scholz, 24 Feb 2004:
  - fix MII commands to use values from last command

* Patch by Torsten Demke, 24 Feb 2004:
  Add support for the eXalion platform (SPSW-8240, F-30, F-300)