netdev.h 6.41 KB
Newer Older
1 2 3 4
/*
 * (C) Copyright 2008
 * Benjamin Warren, biggerbadderben@gmail.com
 *
5
 * SPDX-License-Identifier:	GPL-2.0+
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
 */

/*
 * netdev.h - definitions an prototypes for network devices
 */

#ifndef _NETDEV_H_
#define _NETDEV_H_

/*
 * Board and CPU-specific initialization functions
 * board_eth_init() has highest priority.  cpu_eth_init() only
 * gets called if board_eth_init() isn't instantiated or fails.
 * Return values:
 *      0: success
 *     -1: failure
 */

int board_eth_init(bd_t *bis);
int cpu_eth_init(bd_t *bis);

/* Driver initialization prototypes */
28
int altera_tse_initialize(u8 dev_num, int mac_base,
29 30
			  int sgdma_rx_base, int sgdma_tx_base,
			  u32 sgdma_desc_base, u32 sgdma_desc_size);
31
int at91emac_register(bd_t *bis, unsigned long iobase);
32 33
int au1x00_enet_initialize(bd_t*);
int ax88180_initialize(bd_t *bis);
34
int bfin_EMAC_initialize(bd_t *bis);
Rob Herring's avatar
Rob Herring committed
35
int calxedaxgmac_initialize(u32 id, ulong base_addr);
36
int cs8900_initialize(u8 dev_num, int base_addr);
37
int davinci_emac_initialize(void);
38
int dc21x4x_initialize(bd_t *bis);
39
int designware_initialize(ulong base_addr, u32 interface);
40
int dm9000_initialize(bd_t *bis);
41
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
42
int e1000_initialize(bd_t *bis);
43
int eepro100_initialize(bd_t *bis);
44 45
int enc28j60_initialize(unsigned int bus, unsigned int cs,
	unsigned int max_hz, unsigned int mode);
Matthias Kaehlcke's avatar
Matthias Kaehlcke committed
46
int ep93xx_eth_initialize(u8 dev_num, int base_addr);
47
int eth_3com_initialize (bd_t * bis);
48
int ethoc_initialize(u8 dev_num, int base_addr);
49
int fec_initialize (bd_t *bis);
50
int fecmxc_initialize(bd_t *bis);
Marek Vasut's avatar
Marek Vasut committed
51
int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
52
int ftgmac100_initialize(bd_t *bits);
53
int ftmac100_initialize(bd_t *bits);
54
int ftmac110_initialize(bd_t *bits);
55
int greth_initialize(bd_t *bis);
56
void gt6426x_eth_initialize(bd_t *bis);
57
int inca_switch_initialize(bd_t *bis);
58
int ks8695_eth_initialize(void);
59
int ks8851_mll_initialize(u8 dev_num, int base_addr);
60
int lan91c96_initialize(u8 dev_num, int base_addr);
61 62 63
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
int mcdmafec_initialize(bd_t *bis);
int mcffec_initialize(bd_t *bis);
64
int mpc512x_fec_initialize(bd_t *bis);
65
int mpc5xxx_fec_initialize(bd_t *bis);
66
int mpc82xx_scc_enet_initialize(bd_t *bis);
67
int mvgbe_initialize(bd_t *bis);
68
int natsemi_initialize(bd_t *bis);
69
int ne2k_register(void);
70
int npe_initialize(bd_t *bis);
71
int ns8382x_initialize(bd_t *bis);
72
int pcnet_initialize(bd_t *bis);
73
int plb2800_eth_initialize(bd_t *bis);
74
int ppc_4xx_eth_initialize (bd_t *bis);
75
int rtl8139_initialize(bd_t *bis);
76
int rtl8169_initialize(bd_t *bis);
77
int scc_initialize(bd_t *bis);
78
int sh_eth_initialize(bd_t *bis);
79
int skge_initialize(bd_t *bis);
80
int smc91111_initialize(u8 dev_num, int base_addr);
81
int smc911x_initialize(u8 dev_num, int base_addr);
82
int sunxi_wemac_initialize(bd_t *bis);
83
int tsi108_eth_initialize(bd_t *bis);
84
int uec_standard_init(bd_t *bis);
85
int uli526x_initialize(bd_t *bis);
86
int armada100_fec_register(unsigned long base_addr);
87 88
int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
							unsigned long dma_addr);
89 90
int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
							int txpp, int rxpp);
91 92
int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
						unsigned long ctrl_addr);
93
int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio);
94 95 96 97 98 99 100 101 102
/*
 * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
 * exported by a public hader file, we need a global definition at this point.
 */
#if defined(CONFIG_XILINX_LL_TEMAC)
#define XILINX_LL_TEMAC_M_FIFO		0	/* use FIFO Ctrl */
#define XILINX_LL_TEMAC_M_SDMA_PLB	(1 << 0)/* use SDMA Ctrl via PLB */
#define XILINX_LL_TEMAC_M_SDMA_DCR	(1 << 1)/* use SDMA Ctrl via DCR */
#endif
103 104 105 106 107 108 109 110

/* Boards with PCI network controllers can call this from their board_eth_init()
 * function to initialize whatever's on board.
 * Return value is total # of devices found */

static inline int pci_eth_init(bd_t *bis)
{
	int num = 0;
111

112 113 114 115 116
#ifdef CONFIG_PCI

#ifdef CONFIG_EEPRO100
	num += eepro100_initialize(bis);
#endif
117 118 119
#ifdef CONFIG_TULIP
	num += dc21x4x_initialize(bis);
#endif
120 121 122
#ifdef CONFIG_E1000
	num += e1000_initialize(bis);
#endif
123 124 125
#ifdef CONFIG_PCNET
	num += pcnet_initialize(bis);
#endif
126 127 128
#ifdef CONFIG_NATSEMI
	num += natsemi_initialize(bis);
#endif
129 130 131
#ifdef CONFIG_NS8382X
	num += ns8382x_initialize(bis);
#endif
132 133 134
#if defined(CONFIG_RTL8139)
	num += rtl8139_initialize(bis);
#endif
135 136 137
#if defined(CONFIG_RTL8169)
	num += rtl8169_initialize(bis);
#endif
138
#if defined(CONFIG_ULI526X)
139 140
	num += uli526x_initialize(bis);
#endif
141 142

#endif  /* CONFIG_PCI */
143 144 145
	return num;
}

146 147 148 149 150 151
/*
 * Boards with mv88e61xx switch can use this by defining
 * CONFIG_MV88E61XX_SWITCH in respective board configheader file
 * the stuct and enums here are used to specify switch configuration params
 */
#if defined(CONFIG_MV88E61XX_SWITCH)
152 153 154

/* constants for any 88E61xx switch */
#define MV88E61XX_MAX_PORTS_NUM	6
155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179

enum mv88e61xx_cfg_mdip {
	MV88E61XX_MDIP_NOCHANGE,
	MV88E61XX_MDIP_REVERSE
};

enum mv88e61xx_cfg_ledinit {
	MV88E61XX_LED_INIT_DIS,
	MV88E61XX_LED_INIT_EN
};

enum mv88e61xx_cfg_rgmiid {
	MV88E61XX_RGMII_DELAY_DIS,
	MV88E61XX_RGMII_DELAY_EN
};

enum mv88e61xx_cfg_prtstt {
	MV88E61XX_PORTSTT_DISABLED,
	MV88E61XX_PORTSTT_BLOCKING,
	MV88E61XX_PORTSTT_LEARNING,
	MV88E61XX_PORTSTT_FORWARDING
};

struct mv88e61xx_config {
	char *name;
180
	u8 vlancfg[MV88E61XX_MAX_PORTS_NUM];
181 182 183 184 185 186 187 188
	enum mv88e61xx_cfg_rgmiid rgmii_delay;
	enum mv88e61xx_cfg_prtstt portstate;
	enum mv88e61xx_cfg_ledinit led_init;
	enum mv88e61xx_cfg_mdip mdip;
	u32 ports_enabled;
	u8 cpuport;
};

189 190 191 192 193 194 195 196 197 198 199 200
/*
 * Common mappings for Internal VLANs
 * These mappings consider that all ports are useable; the driver
 * will mask inexistent/unused ports.
 */

/* Switch mode : routes any port to any port */
#define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F }

/* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */
#define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F }

201 202 203
int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
#endif /* CONFIG_MV88E61XX_SWITCH */

204 205 206 207 208 209
struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
#ifdef CONFIG_PHYLIB
struct phy_device;
int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
		struct mii_dev *bus, struct phy_device *phydev);
#else
210 211 212 213
/*
 * Allow FEC to fine-tune MII configuration on boards which require this.
 */
int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
214
#endif
215

216
#endif /* _NETDEV_H_ */