Skip to content

U
uboot-imx
Commit 012771d8 authored by wdenk's avatar wdenk
Browse files
Options

Initial revision

parent 67fc21f3
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 11173 additions and 0 deletions
board/cray/L1/Makefile 0 → 100644
View file @ 012771d8
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
sinclude .depend
#########################################################################
board/eltec/mhpc/u-boot.lds 0 → 100644
View file @ 012771d8
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
cpu/mpc8xx/start.o (.text)
common/environment.o(.text)
*(.text)
*(.fixup)
*(.got1)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(.rodata)
*(.rodata1)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}
board/evb64260/bootseq.txt 0 → 100644
View file @ 012771d8
(cpu/mpc7xxx/start.S)
start:
b boot_cold
start_warm:
b boot_warm
boot_cold:
boot_warm:
clear bats
init l2 (if enabled)
init altivec (if enabled)
invalidate l2 (if enabled)
setup bats (from defines in config_EVB)
enable_addr_trans: (if MMU enabled)
enable MSR_IR and MSR_DR
jump to in_flash
in_flash:
enable l1 dcache
gal_low_init: (board/evb64260/sdram_init.S)
config SDRAM (CFG, TIMING, DECODE)
init scratch regs (810 + 814)
detect DIMM0 (bank 0 only)
config SDRAM_PARA0 to 256/512Mbit
bl sdram_op_mode
detect bank0 width
write scratch reg 810
config SDRAM_PARA0 with results
config SDRAM_PARA1 with results
detect DIMM1 (bank 2 only)
config SDRAM_PARA2 to 256/512Mbit
detect bank2 width
write scratch reg 814
config SDRAM_PARA2 with results
config SDRAM_PARA3 with results
setup device bus timings/width
setup boot device timings/width
setup CPU_CONF (0x0)
setup cpu master control register 0x160
setup PCI0 TIMEOUT
setup PCI1 TIMEOUT
setup PCI0 BAR
setup PCI1 BAR
setup MPP control 0-3
setup GPP level control
setup Serial ports multiplex
setup stack pointer (r1)
setup GOT
call cpu_init_f
debug leds
board_init_f: (common/board.c)
board_pre_init:
remap gt regs?
map PCI mem/io
map device space
clear out interupts
init_timebase
env_init
serial_init
console_init_f
display_options
initdram: (board/evb64260/evb64260.c)
detect memory
for each bank:
dram_size()
setup PCI slave memory mappings
setup SCS
setup monitor
alloc board info struct
init bd struct
relocate_code: (cpu/mpc7xxx/start.S)
copy,got,clearbss
board_init_r(bd, dest_addr) (common/board.c)
setup bd function pointers
trap_init
flash_init: (board/evb64260/flash.c)
setup bd flash info
cpu_init_r: (cpu/mpc7xxx/cpu_init.c)
nothing
mem_malloc_init
malloc_bin_reloc
spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
env_relocated
misc_init_r(bd): (board/evb64260/evb64260.c)
mpsc_init2
board/evb64260/eth_addrtbl.h 0 → 100644
View file @ 012771d8
#ifndef _ADDRESS_TABLE_H
#define _ADDRESS_TABLE_H 1
/*
* ----------------------------------------------------------------------------
* addressTable.h - this file has all the declarations of the address table
*/
#define _8K_TABLE 0
#define ADDRESS_TABLE_ALIGNMENT 8
#define HASH_DEFAULT_MODE 14
#define HASH_MODE 13
#define HASH_SIZE 12
#define HOP_NUMBER 12
#define MAC_ADDRESS_STRING_SIZE 12
#define MAC_ENTRY_SIZE sizeof(addrTblEntry)
#define MAX_NUMBER_OF_ADDRESSES_TO_STORE 1000
#define PROMISCUOUS_MODE 0
#define SKIP 1<<1
#define SKIP_BIT 1
#define VALID 1
/*
* ----------------------------------------------------------------------------
* XXX_MIKE - potential sign-extension bugs lurk here...
*/
#define NIBBLE_SWAPPING_32_BIT(X) ( (((X) & 0xf0f0f0f0) >> 4) \
| (((X) & 0x0f0f0f0f) << 4) )
#define NIBBLE_SWAPPING_16_BIT(X) ( (((X) & 0x0000f0f0) >> 4) \
| (((X) & 0x00000f0f) << 4) )
#define FLIP_4_BITS(X) ( (((X) & 0x01) << 3) | (((X) & 0x002) << 1) \
| (((X) & 0x04) >> 1) | (((X) & 0x008) >> 3) )
#define FLIP_6_BITS(X) ( (((X) & 0x01) << 5) | (((X) & 0x020) >> 5) \
| (((X) & 0x02) << 3) | (((X) & 0x010) >> 3) \
| (((X) & 0x04) << 1) | (((X) & 0x008) >> 1) )
#define FLIP_9_BITS(X) ( (((X) & 0x01) << 8) | (((X) & 0x100) >> 8) \
| (((X) & 0x02) << 6) | (((X) & 0x080) >> 6) \
| (((X) & 0x04) << 4) | (((X) & 0x040) >> 4) \
| ((X) & 0x10) | (((X) & 0x08) << 2) | (((X) & 0x020) >> 2) )
/*
* V: value we're operating on
* O: offset of rightmost bit in field
* W: width of field to shift
* S: distance to shift left
*/
#define MASK( fieldWidth ) ((1 << (fieldWidth)) - 1)
#define leftShiftedBitfield( V,O,W,S) (((V) & (MASK(W) << (O))) << (S))
#define rightShiftedBitfield(V,O,W,S) (((u32)((V) & (MASK(W) << (O)))) >> (S))
/*
* Push to main memory all cache lines associated with
* the specified range of virtual memory addresses
*
* A: Address of first byte in range to flush
* N: Number of bytes to flush
* Note - flush_dcache_range() does a "sync", does NOT invalidate
*/
#define DCACHE_FLUSH_N_SYNC( A, N ) flush_dcache_range( (A), ((A)+(N)) )
typedef struct addressTableEntryStruct {
u32 hi;
u32 lo;
} addrTblEntry;
u32
uncachedPages( u32 pages );
u32
hashTableFunction( u32 macH, u32 macL, u32 HashSize, u32 hash_mode );
unsigned int
initAddressTable( u32 port, u32 hashMode, u32 hashSize );
int
addAddressTableEntry( u32 port, u32 macH, u32 macL, u32 rd, u32 skip );
#endif /* #ifndef _ADDRESS_TABLE_H */
board/evb64260/mpsc.h 0 → 100644
View file @ 012771d8
/*
* (C) Copyright 2001
* John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* mpsc.h - header file for MPSC in uart mode (console driver)
*/
#ifndef __MPSC_H__
#define __MPSC_H__
/* include actual Galileo defines */
#include <galileo/gt64260R.h>
/* driver related defines */
int mpsc_init(int baud);
void mpsc_init2(void);
char mpsc_getchar(void);
int mpsc_test_char(void);
int galbrg_set_baudrate(int channel, int rate);
int mpsc_putchar_early(char ch);
extern int (*mpsc_putchar)(char ch);
#define CHANNEL CONFIG_MPSC_PORT
#define TX_DESC 5
#define RX_DESC 20
#define DESC_FIRST 0x00010000
#define DESC_LAST 0x00020000
#define DESC_OWNER 0x80000000
#define TX_DEMAND 0x00800000
#define TX_STOP 0x00010000
#define RX_ENABLE 0x00000080
#define SDMA_RX_ABORT (1 << 15)
#define SDMA_TX_ABORT (1 << 31)
#define MPSC_TX_ABORT (1 << 7)
#define MPSC_RX_ABORT (1 << 23)
#define MPSC_ENTER_HUNT (1 << 31)
/* MPSC defines */
#define GALMPSC_CONNECT 0x1
#define GALMPSC_DISCONNECT 0x0
#define GALMPSC_UART 0x1
#define GALMPSC_STOP_BITS_1 0x0
#define GALMPSC_STOP_BITS_2 0x1
#define GALMPSC_CHAR_LENGTH_8 0x3
#define GALMPSC_CHAR_LENGTH_7 0x2
#define GALMPSC_PARITY_ODD 0x0
#define GALMPSC_PARITY_EVEN 0x2
#define GALMPSC_PARITY_MARK 0x3
#define GALMPSC_PARITY_SPACE 0x1
#define GALMPSC_PARITY_NONE -1
#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */
#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */
#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */
#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */
#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */
#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */
#define GALMPSC_REG_GAP 0x1000
#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */
#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */
#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */
#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */
#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */
#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */
#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */
#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */
#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */
#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */
#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */
#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */
#define GALSDMA_COMMAND_FIRST (1 << 16)
#define GALSDMA_COMMAND_LAST (1 << 17)
#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
#define GALSDMA_COMMAND_AUTO (1 << 30)
#define GALSDMA_COMMAND_OWNER (1 << 31)
#define GALSDMA_RX 0
#define GALSDMA_TX 1
/* CHANNEL2 should be CHANNEL1, according to documentation,
* but to work with the current GTREGS file...
*/
#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */
#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */
#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */
#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */
#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */
#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */
#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */
#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */
#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */
#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */
#define GALSDMA_REG_DIFF 0x2000
/* WRONG in gt64260R.h */
#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */
#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */
#define GALSDMA_MODE_UART 0
#define GALSDMA_MODE_BISYNC 1
#define GALSDMA_MODE_HDLC 2
#define GALSDMA_MODE_TRANSPARENT 3
#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */
#define GALBRG_REG_GAP 0x0008
#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */
#endif /* __MPSC_H__ */
board/evb64260/serial.h 0 → 100644
View file @ 012771d8
/* serial.h - mostly useful for DUART serial_init in serial.c */
#ifndef __SERIAL_H__
#define __SERIAL_H__
#if 0
#define B230400 1
#define B115200 2
#define B57600 4
#define B38400 82
#define B19200 163
#define B9600 24
#define B4800 651
#define B2400 1302
#define B1200 2604
#define B600 5208
#define B300 10417
#define B150 20833
#define B110 28409
#define BDEFAULT B115200
/* this stuff is important to initialize
the DUART channels */
#define Scale 0x01L /* distance between port addresses */
#define COM1 0x000003f8 /* Keyboard */
#define COM2 0x000002f8 /* Host */
/* Port Definitions relative to base COM port addresses */
#define DataIn (0x00*Scale) /* data input port */
#define DataOut (0x00*Scale) /* data output port */
#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */
#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */
#define Ier (0x01*Scale) /* interrupt enable register */
#define Iir (0x02*Scale) /* interrupt identification register */
#define Lcr (0x03*Scale) /* line control register */
#define Mcr (0x04*Scale) /* modem control register */
#define Lsr (0x05*Scale) /* line status register */
#define Msr (0x06*Scale) /* modem status register */
/* Bit Definitions for above ports */
#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */
#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */
#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */
#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */
#define McrDflt (McrRts|McrDtr)
#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/
/* b6: transmitter empty */
#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */
#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */
#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */
#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */
#define IerRda 0xf /* b0: Enable received data available interrupt */
#endif
#endif /* __SERIAL_H__ */
board/flagadm/Makefile 0 → 100644
View file @ 012771d8
#
# (C) Copyright 2001
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $^
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
sinclude .depend
#########################################################################
board/flagadm/u-boot.lds 0 → 100644
View file @ 012771d8
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
cpu/mpc8xx/start.o (.text)
*(.text)
*(.fixup)
*(.got1)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(.rodata)
*(.rodata1)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}
board/gth/ee_access.h 0 → 100644
View file @ 012771d8
/* By Thomas.Lange@Corelatus.com 001025
Definitions for EEPROM/VOLT METER DS2438 */
#ifndef INCeeaccessh
#define INCeeaccessh
int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip );
int ee_init_data(void);
int ee_crc_ok( u8 *Buffer, int Len, u8 Crc );
#ifndef TRUE
#define TRUE 1
#endif
#endif /* INCeeaccessh */
board/gth/ee_dev.h 0 → 100644
View file @ 012771d8
/* By Thomas.Lange@Corelatus.com 001025
$Revision: 1.6 $
Definitions for EEPROM/VOLT METER DS2438