Commit 01fbf310 authored by David Andrey's avatar David Andrey Committed by Michal Simek

net: gem: Preserve clk on emio interface

Avoid overwriting GEMx_RCLK_CTRL and GEMx_CLK_CTRL
if the Ethernet interface is connect on EMIO

Do not enable emio for this standard board configuration for now.
Signed-off-by: default avatarDavid Andrey <david.andrey@netmodule.com>
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
Reviewed-by: default avatarTom Rini <trini@ti.com>
parent 117cd4cc
......@@ -43,11 +43,11 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_ZYNQ_GEM)
# if defined(CONFIG_ZYNQ_GEM0)
ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
CONFIG_ZYNQ_GEM_PHY_ADDR0);
CONFIG_ZYNQ_GEM_PHY_ADDR0, 0);
# endif
# if defined(CONFIG_ZYNQ_GEM1)
ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
CONFIG_ZYNQ_GEM_PHY_ADDR1);
CONFIG_ZYNQ_GEM_PHY_ADDR1, 0);
# endif
#endif
return ret;
......
......@@ -33,6 +33,7 @@
#include <phy.h>
#include <miiphy.h>
#include <watchdog.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#if !defined(CONFIG_PHYLIB)
......@@ -136,6 +137,7 @@ struct zynq_gem_priv {
u32 rxbd_current;
u32 rx_first_buf;
int phyaddr;
u32 emio;
int init;
struct phy_device *phydev;
struct mii_dev *bus;
......@@ -317,8 +319,11 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
break;
}
/* FIXME maybe better to define gem address in hardware.h */
zynq_slcr_gem_clk_setup(dev->iobase != 0xE000B000, rclk, clk);
/* Change the rclk and clk only not using EMIO interface */
if (!priv->emio)
zynq_slcr_gem_clk_setup(dev->iobase !=
ZYNQ_GEM_BASEADDR0, rclk, clk);
setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
ZYNQ_GEM_NWCTRL_TXEN_MASK);
......@@ -427,7 +432,7 @@ static int zynq_gem_miiphy_write(const char *devname, uchar addr,
return phywrite(dev, addr, reg, val);
}
int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr)
int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio)
{
struct eth_device *dev;
struct zynq_gem_priv *priv;
......@@ -444,6 +449,7 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr)
priv = dev->priv;
priv->phyaddr = phy_addr;
priv->emio = emio;
sprintf(dev->name, "Gem.%x", base_addr);
......
......@@ -104,7 +104,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
int txpp, int rxpp);
int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
unsigned long ctrl_addr);
int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr);
int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio);
/*
* As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
* exported by a public hader file, we need a global definition at this point.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment