Moved initialization of RTL8169 Ethernet controller to board_eth_init()

Affected boards:
	linkstation
	r7780mp

Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

board/linkstation/linkstation.c

@@ -26,6 +26,7 @@
 #include <mpc824x.h>
 #include <asm/io.h>
 #include <ns16550.h>
+#include <netdev.h>
 
 #ifdef CONFIG_PCI
 #include <pci.h>
@@ -128,3 +129,8 @@ int board_early_init_f (void)
 	out_8((volatile u8*)UART_DCR, 1);
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/r7780mp/r7780mp.c

@@ -23,6 +23,7 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/pci.h>
+#include <netdev.h>
 #include "r7780mp.h"
 
 int checkboard(void)
@@ -77,3 +78,8 @@ void pci_init_board(void)
 {
 	pci_sh7780_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

drivers/net/rtl8169.c

@@ -55,6 +55,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 

include/netdev.h

@@ -46,6 +46,7 @@ int greth_initialize(bd_t *bis);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int mcdmafec_initialize(bd_t *bis);
 int mcffec_initialize(bd_t *bis);
+int rtl8169_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
 
@@ -56,6 +57,9 @@ int uli526x_initialize(bd_t *bis);
 static inline int pci_eth_init(bd_t *bis)
 {
 	int num = 0;
+#if defined(CONFIG_RTL8169)
+	num += rtl8169_initialize(bis);
+#endif
 #if defined(CONFIG_ULI526)
 	num += uli526x_initialize(bis);
 #endif

net/eth.c

@@ -61,7 +61,6 @@ extern int pcnet_initialize(bd_t*);
 extern int plb2800_eth_initialize(bd_t*);
 extern int ppc_4xx_eth_initialize(bd_t *);
 extern int rtl8139_initialize(bd_t*);
-extern int rtl8169_initialize(bd_t*);
 extern int scc_initialize(bd_t*);
 extern int tsi108_eth_initialize(bd_t*);
 extern int npe_initialize(bd_t *);
@@ -250,10 +249,6 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_RTL8139)
 	rtl8139_initialize(bis);
 #endif
-#if defined(CONFIG_RTL8169)
-	rtl8169_initialize(bis);
-#endif
-
 	if (!eth_devices) {
 		puts ("No ethernet found.\n");
 		show_boot_progress (-64);