Commit 0549353a authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

mecp5123: fix build error

The mecp5123 board did not compile because the MSCAN Clock Control
Registers were missing; these got added, but as an array instead
of 4 individual registers. Adapt the code so it builds.
Signed-off-by: default avatarWolfgang Denk <>
Cc: Stefan Roese <>
Cc: Reinhard Arlt <>
parent a9905db5
......@@ -79,6 +79,7 @@ int board_early_init_f(void)
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 spridr;
int i;
* Initialize Local Window for NOR FLASH access
......@@ -129,14 +130,10 @@ int board_early_init_f(void)
* Configure MSCAN clocks
out_be32(&im->clk.m1ccr, 0x00300000);
out_be32(&im->clk.m2ccr, 0x00300000);
out_be32(&im->clk.m3ccr, 0x00300000);
out_be32(&im->clk.m4ccr, 0x00300000);
out_be32(&im->clk.m1ccr, 0x00310000);
out_be32(&im->clk.m2ccr, 0x00310000);
out_be32(&im->clk.m3ccr, 0x00310000);
out_be32(&im->clk.m4ccr, 0x00310000);
for (i=0; i<4; ++i) {
out_be32(&im->clk.msccr[i], 0x00300000);
out_be32(&im->clk.msccr[i], 0x00310000);
* Configure GPIO's
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment