Commit 070d00b8 authored by Simon Glass's avatar Simon Glass
Browse files

dm: spl: Allow device tree/driver model in board_init_f()



Add an spl_init() function that does basic init such that board_init_f() can
use simple malloc(), device tree and driver model. Each one is set up only
if enabled for SPL.

Note: We really should refactor SPL such that there is a single
board_init_f() and rename the existing weak board_init_f() functions
provided by boards, calling them from the single board_init_f().
Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
parent cb5f97f7
......@@ -148,18 +148,12 @@ static void spl_ram_load_image(void)
}
#endif
void board_init_r(gd_t *dummy1, ulong dummy2)
int spl_init(void)
{
u32 boot_device;
int ret;
debug(">>spl:board_init_r()\n");
#if defined(CONFIG_SYS_SPL_MALLOC_START)
mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
CONFIG_SYS_SPL_MALLOC_SIZE);
gd->flags |= GD_FLG_FULL_MALLOC_INIT;
#elif defined(CONFIG_SYS_MALLOC_F_LEN)
debug("spl_init()\n");
#if defined(CONFIG_SYS_MALLOC_F_LEN)
gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
gd->malloc_ptr = 0;
#endif
......@@ -168,17 +162,36 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
ret = fdtdec_setup();
if (ret) {
debug("fdtdec_setup() returned error %d\n", ret);
hang();
return ret;
}
}
if (IS_ENABLED(CONFIG_SPL_DM)) {
ret = dm_init_and_scan(true);
if (ret) {
debug("dm_init_and_scan() returned error %d\n", ret);
hang();
return ret;
}
}
gd->flags |= GD_FLG_SPL_INIT;
return 0;
}
void board_init_r(gd_t *dummy1, ulong dummy2)
{
u32 boot_device;
debug(">>spl:board_init_r()\n");
#if defined(CONFIG_SYS_SPL_MALLOC_START)
mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
CONFIG_SYS_SPL_MALLOC_SIZE);
gd->flags |= GD_FLG_FULL_MALLOC_INIT;
#endif
if (!(gd->flags & GD_FLG_SPL_INIT)) {
if (spl_init())
hang();
}
#ifndef CONFIG_PPC
/*
* timer_init() does not exist on PPC systems. The timer is initialized
......
......@@ -116,5 +116,6 @@ typedef struct global_data {
#define GD_FLG_ENV_READY 0x00080 /* Env. imported into hash table */
#define GD_FLG_SERIAL_READY 0x00100 /* Pre-reloc serial console ready */
#define GD_FLG_FULL_MALLOC_INIT 0x00200 /* Full malloc() is ready */
#define GD_FLG_SPL_INIT 0x00400 /* spl_init() has been called */
#endif /* __ASM_GENERIC_GBL_DATA_H */
......@@ -81,6 +81,18 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image);
int spl_load_image_ext(block_dev_desc_t *block_dev, int partition, const char *filename);
int spl_load_image_ext_os(block_dev_desc_t *block_dev, int partition);
/**
* spl_init() - Set up device tree and driver model in SPL if enabled
*
* Call this function in board_init_f() if you want to use device tree and
* driver model early, before board_init_r() is called. This function will
* be called from board_init_r() if not called earlier.
*
* If this is not called, then driver model will be inactive in SPL's
* board_init_f(), and no device tree will be available.
*/
int spl_init(void);
#ifdef CONFIG_SPL_BOARD_INIT
void spl_board_init(void);
#endif
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment