Commit 0768a69f authored by Fabio Estevam's avatar Fabio Estevam Committed by Stefano Babic
Browse files

mx6cuboxi: Mention Cubox-i in the README



Cubox-i boards are also supported, so update the README file.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
parent 62be18ef
How to use U-boot on Solid-run mx6 hummingboard
-----------------------------------------------
How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------
- Build U-boot for hummingboard:
- Build U-boot for Hummingboard/Cubox-i:
$ make mrproper
$ make mx6cuboxi_defconfig
......@@ -17,5 +17,5 @@ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
- Insert the SD card in the hummingboard, power it up and U-boot messages
should come up.
- Insert the SD card in the board, power it up and U-boot messages should
come up.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment