Commit 09e4b0c5 authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

Add support for Lite5200B board.

Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
parent ff7fefe6
......@@ -2,6 +2,9 @@
Changes since U-Boot 1.1.4:
======================================================================
* Add support for Lite5200B board.
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
timer and cpu_reset code from cpu/$(CPU) into the new
cpu/$(CPU)/$(SOC) directories
......
......@@ -25,9 +25,10 @@ LIST_5xx=" \
#########################################################################
LIST_5xxx=" \
cpci5200 icecube_5100 icecube_5200 EVAL5200 \
mcc200 o2dnt pf5200 PM520 \
Total5100 Total5200 Total5200_Rev2 TQM5200_auto \
cpci5200 EVAL5200 icecube_5100 icecube_5200 \
lite5200b mcc200 o2dnt pf5200 \
PM520 Total5100 Total5200 Total5200_Rev2 \
TQM5200_auto \
"
#########################################################################
......
......@@ -303,6 +303,20 @@ icecube_5100_config: unconfig
inka4x0_config: unconfig
@./mkconfig inka4x0 ppc mpc5xxx inka4x0
lite5200b_config \
lite5200b_LOWBOOT_config: unconfig
@ >include/config.h
@ echo "#define CONFIG_MPC5200_DDR" >>include/config.h
@ echo "... DDR memory revision"
@ echo "#define CONFIG_MPC5200" >>include/config.h
@ echo "#define CONFIG_LITE5200B" >>include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
echo "... with LOWBOOT configuration" ; \
}
@ echo "... with MPC5200B processor"
@./mkconfig -a IceCube ppc mpc5xxx icecube
mcc200_config \
mcc200_lowboot_config: unconfig
@ >include/config.h
......
......@@ -261,44 +261,44 @@ The following options need to be configured:
PowerPC based boards:
---------------------
CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCIPPC2
CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC6
CONFIG_AMX860 CONFIG_GTH CONFIG_pcu_e
CONFIG_AP1000 CONFIG_gw8260 CONFIG_PIP405
CONFIG_AR405 CONFIG_hermes CONFIG_PM826
CONFIG_BAB7xx CONFIG_hymod CONFIG_ppmc8260
CONFIG_c2mon CONFIG_IAD210 CONFIG_QS823
CONFIG_CANBT CONFIG_ICU862 CONFIG_QS850
CONFIG_CCM CONFIG_IP860 CONFIG_QS860T
CONFIG_CMI CONFIG_IPHASE4539 CONFIG_RBC823
CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RPXClassic
CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXlite
CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXsuper
CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_rsdproto
CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_sacsng
CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_Sandpoint8240
CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8245
CONFIG_CSB272 CONFIG_LANTEC CONFIG_sbc8260
CONFIG_CU824 CONFIG_lwmon CONFIG_sbc8560
CONFIG_DASA_SIM CONFIG_MBX CONFIG_SM850
CONFIG_DB64360 CONFIG_MBX860T CONFIG_SPD823TS
CONFIG_DB64460 CONFIG_MHPC CONFIG_STXGP3
CONFIG_DU405 CONFIG_MIP405 CONFIG_SXNI855T
CONFIG_DUET_ADS CONFIG_MOUSSE CONFIG_TQM823L
CONFIG_EBONY CONFIG_MPC8260ADS CONFIG_TQM8260
CONFIG_ELPPC CONFIG_MPC8540ADS CONFIG_TQM850L
CONFIG_ELPT860 CONFIG_MPC8540EVAL CONFIG_TQM855L
CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM860L
CONFIG_ERIC CONFIG_MUSENKI CONFIG_TTTech
CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_UTX8245
CONFIG_ETX094 CONFIG_NETPHONE CONFIG_V37
CONFIG_EVB64260 CONFIG_NETTA CONFIG_W7OLMC
CONFIG_FADS823 CONFIG_NETVIA CONFIG_W7OLMG
CONFIG_FADS850SAR CONFIG_NX823 CONFIG_WALNUT
CONFIG_FADS860T CONFIG_OCRTC CONFIG_ZPC1900
CONFIG_FLAGADM CONFIG_ORSG CONFIG_ZUMA
CONFIG_FPS850L CONFIG_OXC
CONFIG_FPS860L CONFIG_PCI405
CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405
CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2
CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6
CONFIG_AP1000 CONFIG_gw8260 CONFIG_pcu_e
CONFIG_AR405 CONFIG_hermes CONFIG_PIP405
CONFIG_BAB7xx CONFIG_hymod CONFIG_PM826
CONFIG_c2mon CONFIG_IAD210 CONFIG_ppmc8260
CONFIG_CANBT CONFIG_ICU862 CONFIG_QS823
CONFIG_CCM CONFIG_IP860 CONFIG_QS850
CONFIG_CMI CONFIG_IPHASE4539 CONFIG_QS860T
CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RBC823
CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXClassic
CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXlite
CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_RPXsuper
CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_rsdproto
CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_sacsng
CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8240
CONFIG_CSB272 CONFIG_LANTEC CONFIG_Sandpoint8245
CONFIG_CU824 CONFIG_LITE5200B CONFIG_sbc8260
CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8560
CONFIG_DB64360 CONFIG_MBX CONFIG_SM850
CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS
CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3
CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T
CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L
CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260
CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L
CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM855L
CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM860L
CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TTTech
CONFIG_ETX094 CONFIG_MVS1 CONFIG_UTX8245
CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_V37
CONFIG_FADS823 CONFIG_NETTA CONFIG_W7OLMC
CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMG
CONFIG_FADS860T CONFIG_NX823 CONFIG_WALNUT
CONFIG_FLAGADM CONFIG_OCRTC CONFIG_ZPC1900
CONFIG_FPS850L CONFIG_ORSG CONFIG_ZUMA
CONFIG_FPS860L CONFIG_OXC
ARM based boards:
-----------------
......
......@@ -23,6 +23,7 @@
#include <common.h>
#ifndef CFG_FLASH_CFI_DRIVER
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
......@@ -489,3 +490,4 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
return (res);
}
#endif /*CFG_FLASH_CFI_DRIVER*/
......@@ -28,12 +28,15 @@
#include <mpc5xxx.h>
#include <pci.h>
#if defined(CONFIG_MPC5200_DDR)
#include "mt46v16m16-75.h"
#if defined(CONFIG_LITE5200B)
#include "mt46v32m16.h"
#else
# if defined(CONFIG_MPC5200_DDR)
# include "mt46v16m16-75.h"
# else
#include "mt48lc16m16a2-75.h"
# endif
#endif
#ifndef CFG_RAMBOOT
static void sdram_start (int hi_addr)
{
......@@ -236,7 +239,9 @@ long int initdram (int board_type)
int checkboard (void)
{
#if defined(CONFIG_MPC5200)
#if defined (CONFIG_LITE5200B)
puts ("Board: Freescale Lite5200B\n");
#elif defined(CONFIG_MPC5200)
puts ("Board: Motorola MPC5200 (IceCube)\n");
#elif defined(CONFIG_MGT5100)
puts ("Board: Motorola MGT5100 (IceCube)\n");
......
/*
* (C) Copyright 2004
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#define SDRAM_DDR 1 /* is DDR */
#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
#define SDRAM_CONTROL 0x704f0f00
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
#else
#error CONFIG_MPC5200 not defined
#endif
......@@ -246,9 +246,9 @@ pci_init_board(void)
/* System memory space */
pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,
CONFIG_PCI_SYS_MEM_PHYS,
gd->ram_size,
PCI_REGION_MEM | PCI_REGION_MEMORY);
CONFIG_PCI_SYS_MEM_PHYS,
gd->ram_size,
PCI_REGION_MEM | PCI_REGION_MEMORY);
hose->region_count = 4;
......@@ -342,9 +342,9 @@ pci_init_board(void)
/* System memory space */
pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,
CONFIG_PCI_SYS_MEM_PHYS,
gd->ram_size,
PCI_REGION_MEM | PCI_REGION_MEMORY);
CONFIG_PCI_SYS_MEM_PHYS,
gd->ram_size,
PCI_REGION_MEM | PCI_REGION_MEMORY);
hose->region_count = 4;
......
......@@ -89,8 +89,8 @@ static inline int
data_crc(struct jffs2_raw_inode *node)
{
if (node->data_crc != crc32_no_comp(0, (unsigned char *)
((int) &node->node_crc + sizeof (node->node_crc)),
node->csize)) {
((int) &node->node_crc + sizeof (node->node_crc)),
node->csize)) {
return 0;
} else {
return 1;
......
......@@ -122,9 +122,13 @@
# define CFG_LOWBOOT16 1
#endif
#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
#if defined(CONFIG_LITE5200B)
# error CFG_LOWBOOT08 is incompatible with the Lite5200B
#else
# define CFG_LOWBOOT 1
# define CFG_LOWBOOT08 1
#endif
#endif
/*
* Autobooting
......@@ -160,8 +164,12 @@
/*
* IPB Bus clocking configuration.
*/
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
#if defined(CONFIG_LITE5200B)
#define CFG_IPBSPEED_133 /* define for 133MHz speed */
#else
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
#endif
#endif /* CONFIG_MPC5200 */
/*
* I2C configuration
*/
......@@ -182,6 +190,20 @@
/*
* Flash configuration
*/
#if defined(CONFIG_LITE5200B)
#define CFG_FLASH_BASE 0xFE000000
#define CFG_FLASH_SIZE 0x01000000
#if !defined(CFG_LOWBOOT)
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01760000 + 0x00800000)
#else /* CFG_LOWBOOT */
#if defined(CFG_LOWBOOT08)
# error CFG_LOWBOOT08 is incompatible with the Lite5200B
#endif
#if defined(CFG_LOWBOOT16)
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01060000)
#endif
#endif /* CFG_LOWBOOT */
#else /* !CONFIG_LITE5200B (IceCube)*/
#define CFG_FLASH_BASE 0xFF000000
#define CFG_FLASH_SIZE 0x01000000
#if !defined(CFG_LOWBOOT)
......@@ -194,6 +216,7 @@
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000)
#endif
#endif /* CFG_LOWBOOT */
#endif /* CONFIG_LITE5200B */
#define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
......@@ -203,13 +226,23 @@
#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */
#if defined(CONFIG_LITE5200B)
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_BANKS_LIST {CFG_CS1_START,CFG_CS0_START}
#endif
/*
* Environment settings
*/
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x10000
#if defined(CONFIG_LITE5200B)
#define CFG_ENV_SECT_SIZE 0x20000
#else
#define CFG_ENV_SECT_SIZE 0x10000
#endif
#define CONFIG_ENV_OVERWRITE 1
/*
......@@ -246,6 +279,9 @@
*/
/* #define CONFIG_FEC_10MBIT 1 */
#define CONFIG_PHY_ADDR 0x00
#if defined(CONFIG_LITE5200B)
#define CONFIG_FEC_MII100 1
#endif
/*
* GPIO configuration
......@@ -288,6 +324,16 @@
#define CFG_HID0_FINAL 0
#endif
#if defined(CONFIG_LITE5200B)
#define CFG_CS1_START CFG_FLASH_BASE
#define CFG_CS1_SIZE CFG_FLASH_SIZE
#define CFG_CS1_CFG 0x00047800
#define CFG_CS0_START (CFG_FLASH_BASE + CFG_FLASH_SIZE)
#define CFG_CS0_SIZE CFG_FLASH_SIZE
#define CFG_BOOTCS_START CFG_CS0_START
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
#define CFG_BOOTCS_CFG 0x00047800
#else /* IceCube aka Lite5200 */
#ifdef CONFIG_MPC5200_DDR
#define CFG_BOOTCS_START (CFG_CS1_START + CFG_CS1_SIZE)
......@@ -306,6 +352,7 @@
#define CFG_CS0_SIZE CFG_FLASH_SIZE
#endif /* CONFIG_MPC5200_DDR */
#endif /*CONFIG_LITE5200B */
#define CFG_CS_BURST 0x00000000
#define CFG_CS_DEADCYCLE 0x33333333
......
......@@ -45,7 +45,7 @@
*/
/* #define DEBUG 1 */
/* #define DEPLOYMENT 1 */
/* #define DEPLOYMENT 1 */
#undef CONFIG_MPC860
#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */
......@@ -61,23 +61,23 @@
#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */
#ifdef DEBUG
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */
#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */
#ifdef DEPLOYMENT
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n"
#define CONFIG_AUTOBOOT_STOP_STR "st"
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n"
#define CONFIG_AUTOBOOT_STOP_STR "st"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 1
#define CONFIG_BOOT_RETRY_MIN 1
#define CONFIG_RESET_TO_RETRY 1
#define CONFIG_BOOT_RETRY_MIN 1
#endif /* DEPLOYMENT */
#endif /* DEBUG */
/* pre-boot commands */
#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial"
#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
......@@ -117,35 +117,35 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
#if 1 /* Enable this staff could make image enlarge about 25KB. Mask it if you
don't want the advanced function */
#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you
don't want the advanced function */
#ifdef CONFIG_SPLASH_SCREEN
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
#ifdef CONFIG_SPLASH_SCREEN
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_BMP | \
CFG_CMD_JFFS2 | \
CFG_CMD_PING | \
CFG_CMD_ELF | \
CFG_CMD_BMP | \
CFG_CMD_JFFS2 | \
CFG_CMD_PING | \
CFG_CMD_ELF | \
CFG_CMD_REGINFO | \
CFG_CMD_DHCP )
CFG_CMD_DHCP )
#else
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_JFFS2 | \
CFG_CMD_PING | \
CFG_CMD_ELF | \
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_JFFS2 | \
CFG_CMD_PING | \
CFG_CMD_ELF | \
CFG_CMD_REGINFO | \
CFG_CMD_DHCP )
#endif /* CONFIG_SPLASH_SCREEN */
CFG_CMD_DHCP )
#endif /* CONFIG_SPLASH_SCREEN */
/* test-only */
#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
#define CONFIG_NETCONSOLE
#endif /* 1 */
#endif /* 1 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
......@@ -310,7 +310,7 @@
#if defined(RPXlite_64MHz)
#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */
#else
#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
#endif
/*-----------------------------------------------------------------------
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment