Commit 0c852a28 authored by wdenk's avatar wdenk
Browse files

* Patch by Rahul Shanbhag, 19 Feb 2004:

  Fixes for for OMAP1610 board:
  - shift some IRQ specific code to platform.S file
  - remove duplicatewatchdog reset code from start.S

* Make Auto-MDIX Support configurable on INCA-IP board

* Fix license for mkimage tool
parent a084f7da
......@@ -2,6 +2,15 @@
Changes for U-Boot 1.0.2:
======================================================================
* Patch by Rahul Shanbhag, 19 Feb 2004:
Fixes for for OMAP1610 board:
- shift some IRQ specific code to platform.S file
- remove duplicatewatchdog reset code from start.S
* Make Auto-MDIX Support configurable on INCA-IP board
* Fix license for mkimage tool
* Patch by Masami Komiya, 24 Feb 2004:
Update NetBootFileXferSize in NFS code
......
......@@ -41,6 +41,15 @@ _TEXT_BASE:
platformsetup:
/*------------------------------------------------------*
*mask all IRQs by setting all bits in the INTMR default*
*------------------------------------------------------*/
mov r1, #0xffffffff
ldr r0, =REG_IHL1_MIR
str r1, [r0]
ldr r0, =REG_IHL2_MIR
str r1, [r0]
/*------------------------------------------------------*
* Set up ARM CLM registers (IDLECT1) *
*------------------------------------------------------*/
......
......@@ -133,27 +133,6 @@ reset:
orr r0,r0,#0xd3
msr cpsr,r0
/*
* turn off the watchdog, unlock/diable sequence
*/
mov r1, #0xF5
ldr r0, =WDTIM_MODE
strh r1, [r0]
mov r1, #0xA0
strh r1, [r0]
/*
* mask all IRQs by setting all bits in the INTMR - default
*/
mov r1, #0xffffffff
ldr r0, =REG_IHL1_MIR
str r1, [r0]
ldr r0, =REG_IHL2_MIR
str r1, [r0]
/*
* we do sys-critical inits only at reboot,
* not when booting from ram!
......
......@@ -174,7 +174,9 @@ int inca_switch_initialize(bd_t * bis)
inca_init_switch_chip();
#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
inca_amdix();
#endif
sprintf(dev->name, "INCA-IP Switch");
dev->init = inca_switch_init;
......@@ -623,6 +625,7 @@ static void inca_dma_init(void)
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
}
#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
static int inca_amdix(void)
{
u32 regValue = 0;
......@@ -706,5 +709,6 @@ static int inca_amdix(void)
return 0;
}
#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */
#endif
......@@ -85,7 +85,8 @@
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
CFG_CMD_ELF | \
CFG_CMD_JFFS2 )
CFG_CMD_JFFS2 | \
CFG_CMD_PING )
#include <cmd_confdefs.h>
/*
......@@ -143,6 +144,7 @@
#define CONFIG_INCA_IP_SWITCH
#define CONFIG_NET_MULTI
#define CONFIG_INCA_IP_SWITCH_AMDIX
#define CFG_JFFS2_FIRST_BANK 1
#define CFG_JFFS2_NUM_BANKS 1
......
/*
* (C) Copyright 2000-2003
* (C) Copyright 2000-2004
* DENX Software Engineering
* Wolfgang Denk, wd@denx.de
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <errno.h>
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment