Commit 0efbbc5c authored by Masahiro Yamada's avatar Masahiro Yamada
Browse files

ARM: uniphier: refactor L2 zero-touching code in lowlevel_init



Here, the ldr pseudo-instruction falls into the ldr + data set.
The register access by [r1, #offset] produces shorter code.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent e731a538
......@@ -11,8 +11,6 @@
#include <linux/sizes.h>
#include <asm/system.h>
#include "ssc-regs.h"
ENTRY(lowlevel_init)
mov r8, lr @ persevere link reg across call
......@@ -88,39 +86,37 @@ ENDPROC(enable_mmu)
*/
#define BOOT_RAM_SIZE (SZ_32K)
#define BOOT_RAM_BASE ((CONFIG_SPL_STACK) - (BOOT_RAM_SIZE))
#define BOOT_WAY_BITS (0x00000100) /* way 8 */
#define BOOT_RAM_WAYS (0x00000100) @ way 8
#define SSCO_BASE 0x506c0000
#define SSCOPE 0x244
#define SSCOQM 0x248
#define SSCOQAD 0x24c
#define SSCOQSZ 0x250
#define SSCOQWN 0x258
#define SSCOPPQSEF 0x25c
#define SSCOLPQS 0x260
ENTRY(setup_init_ram)
/*
* Touch to zero for the boot way
*/
0:
/*
* set UNIPHIER_SSCOQM, UNIPHIER_SSCOQAD, UNIPHIER_SSCOQSZ, UNIPHIER_SSCOQWN in this order
*/
ldr r0, = 0x00408006 @ touch to zero with address range
ldr r1, = UNIPHIER_SSCOQM
str r0, [r1]
ldr r1, = SSCO_BASE
/* Touch to zero for the boot way */
0: ldr r0, = 0x00408006 @ touch to zero with address range
str r0, [r1, #SSCOQM]
ldr r0, = BOOT_RAM_BASE
ldr r1, = UNIPHIER_SSCOQAD
str r0, [r1]
str r0, [r1, #SSCOQAD]
ldr r0, = BOOT_RAM_SIZE
ldr r1, = UNIPHIER_SSCOQSZ
str r0, [r1]
ldr r0, = BOOT_WAY_BITS
ldr r1, = UNIPHIER_SSCOQWN
str r0, [r1]
ldr r1, = UNIPHIER_SSCOPPQSEF
ldr r0, [r1]
str r0, [r1, #SSCOQSZ]
ldr r0, = BOOT_RAM_WAYS
str r0, [r1, #SSCOQWN]
ldr r0, [r1, #SSCOPPQSEF]
cmp r0, #0 @ check if the command is successfully set
bne 0b @ try again if an error occurs
ldr r1, = UNIPHIER_SSCOLPQS
1:
ldr r0, [r1]
1: ldr r0, [r1, #SSCOLPQS]
cmp r0, #0x4
bne 1b @ wait until the operation is completed
str r0, [r1] @ clear the complete notification flag
str r0, [r1, #SSCOLPQS] @ clear the complete notification flag
mov pc, lr
ENDPROC(setup_init_ram)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment