Commit 10faafd5 authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

parents 6973fb41 4a9932a4
......@@ -299,6 +299,7 @@ void cpu_init_f (volatile immap_t * im)
im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
#endif
#ifdef CONFIG_USB_EHCI_FSL
#ifndef CONFIG_MPC834x
uint32_t temp;
struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
......@@ -311,6 +312,7 @@ void cpu_init_f (volatile immap_t * im)
udelay(1000);
} while (!(temp & PHY_CLK_VALID));
#endif
#endif
}
int cpu_init_r (void)
......
......@@ -650,6 +650,12 @@ typedef struct immap {
u8 res7[0xC0000];
} immap_t;
#ifdef CONFIG_HAS_FSL_MPH_USB
#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x22000 /* use the MPH controller */
#else
#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 /* use the DR controller */
#endif
#elif defined(CONFIG_MPC8313)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
......@@ -856,7 +862,10 @@ typedef struct immap {
#define CONFIG_SYS_MPC83xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
#define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000)
#define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000
#ifndef CONFIG_SYS_MPC83xx_USB_OFFSET
#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000
#endif
#define CONFIG_SYS_MPC83xx_USB_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
#endif /* __IMMAP_83xx__ */
......@@ -211,7 +211,7 @@
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/*
......@@ -236,6 +236,7 @@
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
......
......@@ -226,6 +226,7 @@
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
......
......@@ -156,7 +156,7 @@
#endif
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/*
......
......@@ -144,7 +144,7 @@
#endif
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/*
......
......@@ -201,7 +201,7 @@
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/*
......
......@@ -79,6 +79,7 @@
#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */
#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */
#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */
#endif
#define CONFIG_PCI
......@@ -155,6 +156,25 @@
#endif
#ifdef CONFIG_SYS_USB_HOST
/*
* Support USB
*/
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
/* Current USB implementation supports the only USB controller,
* so we have to choose between the MPH or the DR ones */
#if 1
#define CONFIG_HAS_FSL_MPH_USB
#else
#define CONFIG_HAS_FSL_DR_USB
#endif
#endif
/*
* DDR Setup
*/
......@@ -288,7 +308,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/*
......@@ -456,9 +476,11 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SDRAM
#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114)
#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
|| defined(CONFIG_USB_STORAGE)
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_FAT
#define CONFIG_SUPPORT_VFAT
#endif
#ifdef CONFIG_COMPACT_FLASH
......@@ -467,6 +489,9 @@ boards, we say we have two, but don't display a message if we find only one. */
#ifdef CONFIG_SATA_SIL3114
#define CONFIG_CMD_SATA
#endif
#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
#define CONFIG_CMD_EXT2
#endif
......@@ -560,12 +585,14 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
#define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
#define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */
#define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */
#define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */
/*
* System IO Config
*/
#define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */
#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */
#define CONFIG_SYS_HID0_INIT 0x000000000
#define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT
......
......@@ -170,7 +170,7 @@
#endif
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/*
......
......@@ -212,6 +212,7 @@
#define CONFIG_NAND_FSL_UPM 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001b /* Access window size 4K */
......
......@@ -228,7 +228,7 @@
#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/*
......
......@@ -131,6 +131,7 @@
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
......
......@@ -157,7 +157,7 @@
#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/*
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment