Commit 170c1972 authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...

Commit 8d2effea

 added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.
Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
parent 6e897a66
......@@ -157,8 +157,10 @@
#define CONFIG_SYS_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
#define CONFIG_SYS_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*-----------------------------------------------------------------------
* PCI stuff
......
......@@ -165,6 +165,8 @@
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
......
......@@ -219,6 +219,8 @@
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
......
......@@ -160,6 +160,8 @@
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
......
......@@ -265,6 +265,8 @@
#define CONFIG_SYS_NAND0_BASE 0xE1000000
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif /* CONFIG_CMD_NAND */
/*-----------------------------------------------------------------------
......
......@@ -183,6 +183,8 @@
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*
* PCI stuff
*/
......
......@@ -210,6 +210,9 @@
* NAND-FLASH stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*
* nand device 1 on dave (PPChameleonEVB) needs more time,
* so we just introduce additional wait in nand_wait(),
......
......@@ -439,6 +439,8 @@
WRITE_NAND(d, addr); \
} while(0)
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif /* CONFIG_CMD_NAND */
#define CONFIG_PCI
......
......@@ -374,6 +374,8 @@
#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif /* CONFIG_NAND */
/*
......
......@@ -169,6 +169,8 @@
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
......
......@@ -157,6 +157,8 @@
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
......
......@@ -265,6 +265,8 @@
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
......
......@@ -217,6 +217,8 @@
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
......
......@@ -225,6 +225,8 @@
#define CONFIG_SYS_NAND_CLE 31 /* our CLE is GPIO31 */
#define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/*-----------------------------------------------------------------------
......
......@@ -426,6 +426,7 @@ extern unsigned long offsetOfEnvironment;
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x77D00000
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
......
......@@ -188,6 +188,8 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_CMD_NAND
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/* LIME GDC */
#define CONFIG_SYS_LIME_BASE 0xc8000000
#define CONFIG_SYS_LIME_SIZE 0x04000000 /* 64 MB */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment