Commit 1ab027cb authored by Shawn Guo's avatar Shawn Guo Committed by Stefano Babic
Browse files

mx51evk: support new relocation scheme

This patch is to fix build breakage and support new relocation
scheme for mx51evk.

- Correct IRAM base address and add size definition

  The IRAM starts from 0x1FFE0000 on final revsion i.mx51 than
  0x1FFE8000 which is for older revision.

- Include imx-regs.h in mx51evk.h

  Definitions like CSD0_BASE_ADDR and IRAM_BASE_ADDR can be
  referred to.

- Define CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE

  They are used to define init RAM layout.

- Remove comment for CONFIG_SYS_GBL_DATA_SIZE which has been
  buried by Wolfgang's commit below

  25ddd1fb

: Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
Signed-off-by: default avatarShawn Guo <shawn.gsc@gmail.com>
parent 06982534
......@@ -26,7 +26,8 @@
/*
* IRAM
*/
#define IRAM_BASE_ADDR 0x1FFE8000 /* internal ram */
#define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */
#define IRAM_SIZE 0x00020000 /* 128 KB */
/*
* Graphics Memory of GPU
*/
......
......@@ -52,9 +52,9 @@ u32 get_board_rev(void)
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
......
......@@ -24,11 +24,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
#define CONFIG_MX51 /* in a mx51 */
#define CONFIG_SKIP_RELOCATE_UBOOT
#define CONFIG_SYS_MX5_HCLK 24000000
#define CONFIG_SYS_MX5_CLK32 32768
......@@ -51,7 +51,6 @@
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
/* size in bytes reserved for initial data */
#define BOARD_LATE_INIT
......@@ -200,6 +199,15 @@
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_DDR_CLKSEL 0
#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment