Commit 1ab6f61a authored by Hannes Petermaier's avatar Hannes Petermaier Committed by Tom Rini

board/BuR/tseries: cosmetic changes

Cc: trini@ti.com
Signed-off-by: default avatarHannes Petermaier <oe5hpm@oevsv.at>
parent 3e6a52c6
......@@ -130,7 +130,7 @@ static struct module_pin_mux gpIOs[] = {
{OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)},
/* TIMER6 (MMC0_DAT2) - PWM_BACK_3V3, later used as MODE3 for PWM */
{OFFSET(mmc0_dat2), (MODE(7) | PULLUDEN | RXACTIVE)},
/* GPIO2_28 (MMC0_DAT1) - MII_nNAND */
/* GPIO2_27 (MMC0_DAT1) - MII_nNAND */
{OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)},
/* GPIO2_29 (MMC0_DAT0) - NAND_1n0 */
{OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)},
......@@ -153,7 +153,7 @@ static struct module_pin_mux gpIOs[] = {
* DISPLAY_ONOFF (Backlight Enable at LVDS Versions)
*/
{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN | RXACTIVE)},
/* GPIO0_19 (DMA_INTR0) - ISPLAY_MODE (CPLD) */
/* GPIO0_19 (DMA_INTR0) - DISPLAY_MODE (CPLD) */
{OFFSET(xdma_event_intr0), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
/* GPIO0_20 (DMA_INTR1) - REP-Switch */
{OFFSET(xdma_event_intr1), (MODE(7) | PULLUP_EN | RXACTIVE)},
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment