Commit 1d0b59a9 authored by Minghuan Lian's avatar Minghuan Lian Committed by York Sun
Browse files

fsl/pci: Set CFG_READY for PCIe v3.0 and later



Freescale PCIe controllers v3.0 and later need to set bit
CFG_READY to allow all inbound configuration transactions
to be processed normally when in EP mode. However, bit
CFG_READY has been moved from PCIe configuration space to
CCSR PCIe configuration register comparing previous version.
The patch is to set this bit according to PCIe version.
Signed-off-by: default avatarEd Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: default avatarRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: default avatarMinghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: default avatarYork Sun <yorksun@freescale.com>
parent 5066e628
......@@ -19,6 +19,7 @@
#define FSL_PCI_PBFR 0x44
#define FSL_PCIE_CFG_RDY 0x4b0
#define FSL_PCIE_V3_CFG_RDY 0x1
#define FSL_PROG_IF_AGENT 0x1
#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */
......
......@@ -697,8 +697,14 @@ void fsl_pci_config_unlock(struct pci_controller *hose)
pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
if (pcie_cap != 0x0) {
ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)hose->cfg_addr;
u32 block_rev = in_be32(&pci->block_rev1);
/* PCIe - set CFG_READY bit of Configuration Ready Register */
pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1);
if (block_rev >= PEX_IP_BLK_REV_3_0)
setbits_be32(&pci->config, FSL_PCIE_V3_CFG_RDY);
else
pci_hose_write_config_byte(hose, dev,
FSL_PCIE_CFG_RDY, 0x1);
} else {
/* PCI - clear ACL bit of PBFR */
pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment