Commit 1d7442e6 authored by Bo Shen's avatar Bo Shen Committed by Albert ARIBAUD
Browse files

atmel: at91sam9x5: add spi flash boot support



Add at91sam9x5 series spi flash boot support

Using at91sam9x5ek_spiflash to configure, then it can boot from at25df321
serial flash

SPI mater work in 30Mhz speed, while not 1Mhz speed. This will base on
atmel_spi patch, or else, it will occur receive overrun
Signed-off-by: default avatarBo Shen <voice.shen@atmel.com>
Signed-off-by: default avatarAndreas Bießmann <andreas.devel@googlemail.com>
parent 3083efe2
......@@ -96,6 +96,7 @@ at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel
at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH
at91sam9x5ek_spiflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH
at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
......
......@@ -86,6 +86,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NAND
#define CONFIG_CMD_SF
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
......@@ -96,12 +97,11 @@
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
/* DataFlash */
#ifdef CONFIG_ATMEL_SPI
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#ifdef CONFIG_CMD_SF
#define CONFIG_ATMEL_SPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SYS_MAX_DATAFLASH_BANKS
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
/* no NOR flash */
......@@ -149,6 +149,18 @@
#define CONFIG_BOOTCOMMAND "nand read " \
"0x22000000 0x200000 0x300000; " \
"bootm 0x22000000"
#else
#ifdef CONFIG_SYS_USE_SPIFLASH
/* bootstrap + u-boot + env + linux in spi flash */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET 0x5000
#define CONFIG_ENV_SIZE 0x3000
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_SPI_MAX_HZ 30000000
#define CONFIG_BOOTCOMMAND "sf probe 0; " \
"sf read 0x22000000 0x100000 0x300000; " \
"bootm 0x22000000"
#endif
#endif
#define CONFIG_BOOTARGS "mem=128M console=ttyS0,115200 " \
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment