HH405 board support added

board/esd/hh405/Makefile

+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/esd/hh405/config.mk

+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd VOH405 boards
+#
+
+#TEXT_BASE = 0xFFF00000
+TEXT_BASE = 0xFFF80000
+#TEXT_BASE = 0xFFFC0000
+#TEXT_BASE = 0x00FC0000

board/esd/hh405/flash.c

+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}

board/esd/hh405/hh405.c

+/*
+ * (C) Copyright 2001-2004
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern void lxt971_no_sleep(void);
+
+/* fpga configuration data - gzip compressed and generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, unsigned long *);
+
+
+/* logo bitmap data - gzip compressed and generated by bin2c */
+unsigned char logo_bmp_320[] =
+{
+#include "logo_320_240_4bpp.c"
+};
+
+unsigned char logo_bmp_320_8bpp[] =
+{
+#include "logo_320_240_8bpp.c"
+};
+
+unsigned char logo_bmp_640[] =
+{
+#include "logo_640_480_24bpp.c"
+};
+
+unsigned char logo_bmp_1024[] =
+{
+#include "logo_1024_768_8bpp.c"
+};
+
+
+/*
+ * include common lcd code (for esd boards)
+ */
+#include "../common/lcd.c"
+
+#include "../common/s1d13704_320_240_4bpp.h"
+#include "../common/s1d13705_320_240_8bpp.h"
+#include "../common/s1d13806_640_480_16bpp.h"
+#include "../common/s1d13806_1024_768_8bpp.h"
+
+
+/*
+ * include common auto-update code (for esd boards)
+ */
+#include "../common/auto_update.h"
+
+au_image_t au_image[] = {
+	{"hh405/preinst.img", 0, -1, AU_SCRIPT},
+	{"hh405/u-boot.img", 0xfff80000, 0x00080000, AU_FIRMWARE},
+	{"hh405/pImage_$(bd_type)", 0x00000000, 0x00100000, AU_NAND},
+	{"hh405/pImage.initrd", 0x00100000, 0x00200000, AU_NAND},
+	{"hh405/yaffsmt2.img", 0x00300000, 0x01c00000, AU_NAND},
+	{"hh405/postinst.img", 0, 0, AU_SCRIPT},
+};
+
+int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
+
+
+int board_revision(void)
+{
+	unsigned long osrh_reg;
+	unsigned long isr1h_reg;
+	unsigned long tcr_reg;
+	unsigned long value;
+
+	/*
+	 * Get version of HH405 board from GPIO's
+	 */
+
+	/*
+	 * Setup GPIO pins (BLAST/GPIO0 and GPIO9 as GPIO)
+	 */
+	osrh_reg = in32(GPIO0_OSRH);
+	isr1h_reg = in32(GPIO0_ISR1H);
+	tcr_reg = in32(GPIO0_TCR);
+	out32(GPIO0_OSRH, osrh_reg & ~0xC0003000);     /* output select */
+	out32(GPIO0_ISR1H, isr1h_reg | 0xC0003000);    /* input select  */
+	out32(GPIO0_TCR, tcr_reg & ~0x80400000);       /* select input  */
+
+	udelay(1000);            /* wait some time before reading input */
+	value = in32(GPIO0_IR) & 0x80400000;         /* get config bits */
+
+	/*
+	 * Restore GPIO settings
+	 */
+	out32(GPIO0_OSRH, osrh_reg);                   /* output select */
+	out32(GPIO0_ISR1H, isr1h_reg);                 /* input select  */
+	out32(GPIO0_TCR, tcr_reg);  /* enable output driver for outputs */
+
+	if (value & 0x80000000) {
+		/* Revision 1.0 or 1.1 detected */
+		return 1;
+	} else {
+		if (value & 0x00400000) {
+			/* Revision 1.3 detected */
+			return 3;
+		} else {
+			/* Revision 1.2 detected */
+			return 2;
+		}
+	}
+}
+
+
+int board_early_init_f (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, CFG_UIC0_POLARITY);/* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+int misc_init_r (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	volatile unsigned short *fpga_ctrl =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+	volatile unsigned short *lcd_contrast =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+	volatile unsigned short *lcd_backlight =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+	char *str;
+	unsigned long contrast0 = 0xffffffff;
+
+	dst = malloc(CFG_FPGA_MAX_SIZE);
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+		printf ("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset (NULL, 0, 0, NULL);
+	}
+
+	status = fpga_boot(dst, len);
+	if (status != 0) {
+		printf("\nFPGA: Booting failed ");
+		switch (status) {
+		case ERROR_FPGA_PRG_INIT_LOW:
+			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_INIT_HIGH:
+			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_DONE:
+			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			break;
+		}
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("FPGA: %s\n", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+		/* delayed reboot */
+		for (i=20; i>0; i--) {
+			printf("Rebooting in %2d seconds \r",i);
+			for (index=0;index<1000;index++)
+				udelay(1000);
+		}
+		putc ('\n');
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	puts("FPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = dst[index];
+		printf("%s ", &(dst[index+1]));
+		index += len+3;
+	}
+	putc ('\n');
+
+	free(dst);
+
+	/*
+	 * Reset FPGA via FPGA_INIT pin
+	 */
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~FPGA_INIT);  /* reset low */
+	udelay(1000); /* wait 1ms */
+	out32(GPIO0_OR, in32(GPIO0_OR) | FPGA_INIT);   /* reset high */
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Write Board revision into FPGA
+	 */
+	*fpga_ctrl |= gd->board_type & 0x0003;
+	if (gd->board_type >= 2) {
+		*fpga_ctrl |= CFG_FPGA_CTRL_CF_BUS_EN;
+	}
+
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Reset touch-screen controller
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_TOUCH_RST);
+	udelay(1000);
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_TOUCH_RST);
+
+        /*
+         * Enable power on PS/2 interface (with reset)
+         */
+        *fpga_ctrl &= ~(CFG_FPGA_CTRL_PS2_PWR);
+        for (i=0;i<500;i++)
+                udelay(1000);
+        *fpga_ctrl |= (CFG_FPGA_CTRL_PS2_PWR);
+
+	/*
+	 * Get contrast value from environment variable
+	 */
+	str = getenv("contrast0");
+	if (str) {
+		contrast0 = simple_strtol(str, NULL, 16);
+		if (contrast0 > 255) {
+			printf("ERROR: contrast0 value too high (0x%lx)!\n", contrast0);
+			contrast0 = 0;
+		}
+	}
+
+	/*
+	 * Init lcd interface and display logo
+	 */
+	str = getenv("bd_type");
+	if (strcmp(str, "ppc230") == 0) {
+		/*
+		 * Switch backlight on
+		 */
+		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL;
+		*lcd_backlight = 0x0000;
+
+		lcd_setup(1, 0);
+		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+			 regs_13806_1024_768_8bpp,
+			 sizeof(regs_13806_1024_768_8bpp)/sizeof(regs_13806_1024_768_8bpp[0]),
+			 logo_bmp_1024, sizeof(logo_bmp_1024));
+	} else if (strcmp(str, "ppc220") == 0) {
+		/*
+		 * Switch backlight on
+		 */
+		*fpga_ctrl &= ~CFG_FPGA_CTRL_VGA0_BL;
+		*lcd_backlight = 0x0000;
+
+		lcd_setup(1, 0);
+		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+			 regs_13806_640_480_16bpp,
+			 sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
+			 logo_bmp_640, sizeof(logo_bmp_640));
+	} else if (strcmp(str, "ppc215") == 0) {
+		/*
+		 * Set default display contrast voltage
+		 */
+		if (contrast0 == 0xffffffff) {
+			*lcd_contrast = 0x0082;
+		} else {
+			*lcd_contrast = contrast0;
+		}
+		*lcd_backlight = 0xffff;
+		/*
+		 * Switch backlight on
+		 */
+		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE;
+		/*
+		 * Set lcd clock (small epson)
+		 */
+		*fpga_ctrl |= LCD_CLK_06250;
+		udelay(100);               /* wait for 100 us */
+
+		lcd_setup(0, 1);
+		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+			 regs_13705_320_240_8bpp,
+			 sizeof(regs_13705_320_240_8bpp)/sizeof(regs_13705_320_240_8bpp[0]),
+			 logo_bmp_320_8bpp, sizeof(logo_bmp_320_8bpp));
+	} else if (strcmp(str, "ppc210") == 0) {
+		/*
+		 * Set default display contrast voltage
+		 */
+		if (contrast0 == 0xffffffff) {
+			*lcd_contrast = 0x0060;
+		} else {
+			*lcd_contrast = contrast0;
+		}
+		*lcd_backlight = 0xffff;
+		/*
+		 * Switch backlight on
+		 */
+		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE;
+		/*
+		 * Set lcd clock (small epson)
+		 */
+		*fpga_ctrl |= LCD_CLK_08330;
+
+		lcd_setup(0, 1);
+		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+			 regs_13704_320_240_4bpp,
+			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
+			 logo_bmp_320, sizeof(logo_bmp_320));
+	} else {
+		printf("Unsupported bd_type defined (%s) -> No display configured!\n", str);
+		return 0;
+	}
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming HH405");
+	} else {
+		puts(str);
+	}
+
+	if (getenv_r("bd_type", str, sizeof(str)) != -1) {
+		printf(" (%s", str);
+	} else {
+		puts(" (Missing bd_type!");
+	}
+
+	gd->board_type = board_revision();
+	printf(", Rev 1.%ld)\n", gd->board_type);
+
+	/*
+	 * Disable sleep mode in LXT971
+	 */
+	lxt971_no_sleep();
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);