Commit 2d2811c2 authored by Max Filippov's avatar Max Filippov Committed by Tom Rini

xtensa: add core information for the dc233c processor

DC233C is an xtensa processor with full MMUv3 capable of running Linux.
Core information files are autogenerated from the processor description
and are not meant to be edited.
Signed-off-by: default avatarMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: default avatarSimon Glass <sjg@chromium.org>
Reviewed-by: default avatarTom Rini <trini@konsulko.com>
parent da188a03
This diff is collapsed.
/*
* This header file contains assembly-language definitions (assembly
* macros, etc.) for this specific Xtensa processor's TIE extensions
* and options. It is customized to this Xtensa processor configuration.
* This file is autogenerated, please do not edit.
*
* Copyright (C) 1999-2010 Tensilica Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _XTENSA_CORE_TIE_ASM_H
#define _XTENSA_CORE_TIE_ASM_H
/* Selection parameter values for save-area save/restore macros: */
/* Option vs. TIE: */
#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */
#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */
#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */
/* Whether used automatically by compiler: */
#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */
#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */
#define XTHAL_SAS_ANYCC 0x000C /* both of the above */
/* ABI handling across function calls: */
#define XTHAL_SAS_CALR 0x0010 /* caller-saved */
#define XTHAL_SAS_CALE 0x0020 /* callee-saved */
#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */
#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */
/* Misc */
#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \
| ((ccuse) & XTHAL_SAS_ANYCC) \
| ((abi) & XTHAL_SAS_ANYABI) )
/*
* Macro to save all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Required parameters:
* ptr Save area pointer address register (clobbered)
* (register must contain a 4 byte aligned address).
* at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
* registers are clobbered, the remaining are unused).
* Optional parameters:
* continue If macro invoked as part of a larger store sequence, set to 1
* if this is not the first in the sequence. Defaults to 0.
* ofs Offset from start of larger sequence (from value of first ptr
* in sequence) at which to store. Defaults to next available space
* (or 0 if <continue> is 0).
* select Select what category(ies) of registers to store, as a bitmask
* (see XTHAL_SAS_xxx constants). Defaults to all registers.
* alloc Select what category(ies) of registers to allocate; if any
* category is selected here that is not in <select>, space for
* the corresponding registers is skipped without doing any store.
*/
.macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
xchal_sa_start \continue, \ofs
// Optional global register used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
xchal_sa_align \ptr, 0, 1020, 4, 4
rur.THREADPTR \at1 // threadptr option
s32i \at1, \ptr, .Lxchal_ofs_+0
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1020, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.endif
// Optional caller-saved registers used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1016, 4, 4
rsr \at1, ACCLO // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+0
rsr \at1, ACCHI // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1016, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.endif
// Optional caller-saved registers not used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1004, 4, 4
rsr \at1, M0 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+0
rsr \at1, M1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+4
rsr \at1, M2 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+8
rsr \at1, M3 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+12
rsr \at1, SCOMPARE1 // conditional store option
s32i \at1, \ptr, .Lxchal_ofs_+16
.set .Lxchal_ofs_, .Lxchal_ofs_ + 20
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1004, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 20
.endif
.endm // xchal_ncp_store
/*
* Macro to restore all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Required parameters:
* ptr Save area pointer address register (clobbered)
* (register must contain a 4 byte aligned address).
* at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
* registers are clobbered, the remaining are unused).
* Optional parameters:
* continue If macro invoked as part of a larger load sequence, set to 1
* if this is not the first in the sequence. Defaults to 0.
* ofs Offset from start of larger sequence (from value of first ptr
* in sequence) at which to load. Defaults to next available space
* (or 0 if <continue> is 0).
* select Select what category(ies) of registers to load, as a bitmask
* (see XTHAL_SAS_xxx constants). Defaults to all registers.
* alloc Select what category(ies) of registers to allocate; if any
* category is selected here that is not in <select>, space for
* the corresponding registers is skipped without doing any load.
*/
.macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
xchal_sa_start \continue, \ofs
// Optional global register used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
xchal_sa_align \ptr, 0, 1020, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_+0
wur.THREADPTR \at1 // threadptr option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1020, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.endif
// Optional caller-saved registers used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1016, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_+0
wsr \at1, ACCLO // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+4
wsr \at1, ACCHI // MAC16 option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1016, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.endif
// Optional caller-saved registers not used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1004, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_+0
wsr \at1, M0 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+4
wsr \at1, M1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+8
wsr \at1, M2 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+12
wsr \at1, M3 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+16
wsr \at1, SCOMPARE1 // conditional store option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 20
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1004, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 20
.endif
.endm // xchal_ncp_load
#define XCHAL_NCP_NUM_ATMPS 1
#define XCHAL_SA_NUM_ATMPS 1
#endif /*_XTENSA_CORE_TIE_ASM_H*/
/*
* This header file describes this specific Xtensa processor's TIE extensions
* that extend basic Xtensa core functionality. It is customized to this
* Xtensa processor configuration.
* This file is autogenerated, please do not edit.
*
* Copyright (C) 1999-2010 Tensilica Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _XTENSA_CORE_TIE_H
#define _XTENSA_CORE_TIE_H
#define XCHAL_CP_NUM 1 /* number of coprocessors */
#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */
#define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */
#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */
/* Basic parameters of each coprocessor: */
#define XCHAL_CP7_NAME "XTIOP"
#define XCHAL_CP7_IDENT XTIOP
#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */
#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */
#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */
/* Filler info for unassigned coprocessors, to simplify arrays etc: */
#define XCHAL_CP0_SA_SIZE 0
#define XCHAL_CP0_SA_ALIGN 1
#define XCHAL_CP1_SA_SIZE 0
#define XCHAL_CP1_SA_ALIGN 1
#define XCHAL_CP2_SA_SIZE 0
#define XCHAL_CP2_SA_ALIGN 1
#define XCHAL_CP3_SA_SIZE 0
#define XCHAL_CP3_SA_ALIGN 1
#define XCHAL_CP4_SA_SIZE 0
#define XCHAL_CP4_SA_ALIGN 1
#define XCHAL_CP5_SA_SIZE 0
#define XCHAL_CP5_SA_ALIGN 1
#define XCHAL_CP6_SA_SIZE 0
#define XCHAL_CP6_SA_ALIGN 1
/* Save area for non-coprocessor optional and custom (TIE) state: */
#define XCHAL_NCP_SA_SIZE 32
#define XCHAL_NCP_SA_ALIGN 4
/* Total save area for optional and custom state (NCP + CPn): */
#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */
#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */
/*
* Detailed contents of save areas.
* NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
* before expanding the XCHAL_xxx_SA_LIST() macros.
*
* XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
* dbnum,base,regnum,bitsz,gapsz,reset,x...)
*
* s = passed from XCHAL_*_LIST(s), eg. to select how to expand
* ccused = set if used by compiler without special options or code
* abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
* kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
* opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
* name = lowercase reg name (no quotes)
* galign = group byte alignment (power of 2) (galign >= align)
* align = register byte alignment (power of 2)
* asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
* (not including any pad bytes required to galign this or next reg)
* dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
* base = reg shortname w/o index (or sr=special, ur=TIE user reg)
* regnum = reg index in regfile, or special/TIE-user reg number
* bitsz = number of significant bits (regfile width, or ur/sr mask bits)
* gapsz = intervening bits, if bitsz bits not stored contiguously
* (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
* reset = register reset value (or 0 if undefined at reset)
* x = reserved for future use (0 until then)
*
* To filter out certain registers, e.g. to expand only the non-global
* registers used by the compiler, you can do something like this:
*
* #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
* #define SELCC0(p...)
* #define SELCC1(abikind,p...) SELAK##abikind(p)
* #define SELAK0(p...) REG(p)
* #define SELAK1(p...) REG(p)
* #define SELAK2(p...)
* #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
* ...what you want to expand...
*/
#define XCHAL_NCP_SA_NUM 8
#define XCHAL_NCP_SA_LIST(s) \
XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) \
XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \
XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0)
#define XCHAL_CP0_SA_NUM 0
#define XCHAL_CP0_SA_LIST(s) /* empty */
#define XCHAL_CP1_SA_NUM 0
#define XCHAL_CP1_SA_LIST(s) /* empty */
#define XCHAL_CP2_SA_NUM 0
#define XCHAL_CP2_SA_LIST(s) /* empty */
#define XCHAL_CP3_SA_NUM 0
#define XCHAL_CP3_SA_LIST(s) /* empty */
#define XCHAL_CP4_SA_NUM 0
#define XCHAL_CP4_SA_LIST(s) /* empty */
#define XCHAL_CP5_SA_NUM 0
#define XCHAL_CP5_SA_LIST(s) /* empty */
#define XCHAL_CP6_SA_NUM 0
#define XCHAL_CP6_SA_LIST(s) /* empty */
#define XCHAL_CP7_SA_NUM 0
#define XCHAL_CP7_SA_LIST(s) /* empty */
/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
#endif /*_XTENSA_CORE_TIE_H*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment