Commit 30af6c0b authored by Otavio Salvador's avatar Otavio Salvador Committed by Stefano Babic
Browse files

mxs: Fix the memory init for MX23



The memory init is slightly different on MX23, thus split the memory
init for mx23 and mx28 into different functions.
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarOtavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
parent 7788bf06
......@@ -128,13 +128,20 @@ static void mxs_mem_init_clock(void)
{
struct mxs_clkctrl_regs *clkctrl_regs =
(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
#if defined(CONFIG_MX23)
/* Fractional divider for ref_emi is 33 ; 480 * 18 / 33 = 266MHz */
const unsigned char divider = 33;
#elif defined(CONFIG_MX28)
/* Fractional divider for ref_emi is 21 ; 480 * 18 / 21 = 411MHz */
const unsigned char divider = 21;
#endif
/* Gate EMI clock */
writeb(CLKCTRL_FRAC_CLKGATE,
&clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]);
/* Set fractional divider for ref_emi to 480 * 18 / 21 = 411MHz */
writeb(CLKCTRL_FRAC_CLKGATE | (21 & CLKCTRL_FRAC_FRAC_MASK),
/* Set fractional divider for ref_emi */
writeb(CLKCTRL_FRAC_CLKGATE | (divider & CLKCTRL_FRAC_FRAC_MASK),
&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
/* Ungate EMI clock */
......@@ -217,10 +224,60 @@ uint32_t mxs_mem_get_size(void)
return sz;
}
void mxs_mem_init(void)
#ifdef CONFIG_MX23
static void mx23_mem_setup_vddmem(void)
{
struct mxs_power_regs *power_regs =
(struct mxs_power_regs *)MXS_POWER_BASE;
writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
POWER_VDDMEMCTRL_ENABLE_ILIMIT |
POWER_VDDMEMCTRL_ENABLE_LINREG |
POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
&power_regs->hw_power_vddmemctrl);
early_delay(10000);
writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
POWER_VDDMEMCTRL_ENABLE_LINREG,
&power_regs->hw_power_vddmemctrl);
}
static void mx23_mem_init(void)
{
mx23_mem_setup_vddmem();
/*
* Configure the DRAM registers
*/
/* Clear START and SREFRESH bit from DRAM_CTL8 */
clrbits_le32(MXS_DRAM_BASE + 0x20, (1 << 16) | (1 << 8));
initialize_dram_values();
/* Set START bit in DRAM_CTL16 */
setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16);
clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17);
early_delay(20000);
/* Adjust EMI port priority. */
clrsetbits_le32(0x80020000, 0x1f << 16, 0x8);
early_delay(20000);
setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 19);
setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 11);
/* Wait for bit 10 (DRAM init complete) in DRAM_CTL18 */
while (!(readl(MXS_DRAM_BASE + 0x48) & (1 << 10)))
;
}
#endif
#ifdef CONFIG_MX28
static void mx28_mem_init(void)
{
struct mxs_clkctrl_regs *clkctrl_regs =
(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
struct mxs_pinctrl_regs *pinctrl_regs =
(struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE;
......@@ -228,16 +285,6 @@ void mxs_mem_init(void)
writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
&pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set);
/* Power up PLL0 */
writel(CLKCTRL_PLL0CTRL0_POWER,
&clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
early_delay(11000);
mxs_mem_init_clock();
mxs_mem_setup_vdda();
/*
* Configure the DRAM registers
*/
......@@ -256,6 +303,22 @@ void mxs_mem_init(void)
/* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */
while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20)))
;
}
#endif
void mxs_mem_init(void)
{
early_delay(11000);
mxs_mem_init_clock();
mxs_mem_setup_vdda();
#if defined(CONFIG_MX23)
mx23_mem_init();
#elif defined(CONFIG_MX28)
mx28_mem_init();
#endif
early_delay(10000);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment