Commit 44a53b57 authored by Wolfgang Denk's avatar Wolfgang Denk Committed by Anatolij Gustschin
Browse files

VIDEO: better document the correct use of CONFIG_FB_ADDR


Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
cc: Anatolij Gustschin <agust@denx.de>
parent dad631cc
......@@ -2714,10 +2714,13 @@ FIT uImage format:
CONFIG_FB_ADDR
Define CONFIG_FB_ADDR if you want to use specific
address for frame buffer.
Then system will reserve the frame buffer address to
defined address instead of lcd_setmem (this function
grabs the memory for frame buffer by panel's size).
address for frame buffer. This is typically the case
when using a graphics controller has separate video
memory. U-Boot will then place the frame buffer at
the given address instead of dynamically reserving it
in system RAM by calling lcd_setmem(), which grabs
the memory for the frame buffer depending on the
configured panel size.
Please see board_init_f function.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment