Commit 452e8e72 authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

Fix build problems for PM856 Board

parent 8b019da6
......@@ -2,6 +2,8 @@
Changes for U-Boot 1.1.3:
======================================================================
* Fix build problems for PM856 Board
* Fix sign extension bug in 'fpga loadb' command;
make 'fpga loadb' always print the file header info
Patch by Andrew Dyer, 11 Jan 2005
......
/*
* (C) Copyright 2002,2003,Motorola,Inc.
* (C) Copyright 2005 Wolfgang Denk <wd@denx.de>
* (C) Copyright 2002,2003, Motorola,Inc.
* Xianghua Xiao, X.Xiao@motorola.com.
*
* See file CREDITS for list of people who contributed to this
......@@ -66,17 +67,11 @@ SECTIONS
{
cpu/mpc85xx/start.o (.text)
board/pm856/init.o (.text)
cpu/mpc85xx/commproc.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/serial_scc.o (.text)
cpu/mpc85xx/ether_fcc.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/i2c.o (.text)
cpu/mpc85xx/spd_sdram.o (.text)
common/dlmalloc.o (.text)
lib_generic/crc32.o (.text)
lib_ppc/extable.o (.text)
......
......@@ -49,7 +49,7 @@
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_MEM_INIT_VALUE 0xDEADBEEF
/*
......
......@@ -39,6 +39,7 @@
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
#define CONFIG_MPC8560 1 /* MPC8560 specific */
#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_PM856 1 /* PM856 board specific */
#define CONFIG_PCI
......@@ -48,6 +49,7 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
#define CONFIG_MEM_INIT_VALUE 0xDEADBEEF
/*
......@@ -253,7 +255,9 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
......@@ -262,7 +266,7 @@
#endif /* CONFIG_TSEC_ENET */
#define CONFIG_ETHPRIME "ENET0"
#define CONFIG_ETHPRIME "TSEC0"
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
#undef CONFIG_ETHER_NONE /* define if ether on something else */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment