Commit 455a4691 authored by Ron Madrid's avatar Ron Madrid Committed by Kim Phillips
Browse files

mpc83xx: Size optimization of start.S



Currently there are in excess of 100 bytes located at the beginning of the image
built by start.S that are not being utilized.  This patch moves a few functions
into this part of the image.  This will create a greater number of *available*
bytes that can be used by board specific code in NAND builds and will decrease
the size of the assembled code in other builds.
Signed-off-by: default avatarRon Madrid <ron_madrid@sbcglobal.net>
Signed-off-by: default avatarKim Phillips <kim.phillips@freescale.com>
parent be4880eb
......@@ -109,6 +109,45 @@ version_string:
.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
.ascii " ", CONFIG_IDENT_STRING, "\0"
.align 2
.globl enable_addr_trans
enable_addr_trans:
/* enable address translation */
mfmsr r5
ori r5, r5, (MSR_IR | MSR_DR)
mtmsr r5
isync
blr
.globl disable_addr_trans
disable_addr_trans:
/* disable address translation */
mflr r4
mfmsr r3
andi. r0, r3, (MSR_IR | MSR_DR)
beqlr
andc r3, r3, r0
mtspr SRR0, r4
mtspr SRR1, r3
rfi
.globl get_pvr
get_pvr:
mfspr r3, PVR
blr
.globl ppcDWstore
ppcDWstore:
lfd 1, 0(r4)
stfd 1, 0(r3)
blr
.globl ppcDWload
ppcDWload:
lfd 1, 0(r3)
stfd 1, 0(r4)
blr
#ifndef CONFIG_DEFAULT_IMMR
#error CONFIG_DEFAULT_IMMR must be defined
......@@ -698,27 +737,6 @@ setup_bats:
blr
.globl enable_addr_trans
enable_addr_trans:
/* enable address translation */
mfmsr r5
ori r5, r5, (MSR_IR | MSR_DR)
mtmsr r5
isync
blr
.globl disable_addr_trans
disable_addr_trans:
/* disable address translation */
mflr r4
mfmsr r3
andi. r0, r3, (MSR_IR | MSR_DR)
beqlr
andc r3, r3, r0
mtspr SRR0, r4
mtspr SRR1, r3
rfi
/* Cache functions.
*
* Note: requires that all cache bits in
......@@ -796,23 +814,6 @@ flush_dcache:
b 1b
2: blr
.globl get_pvr
get_pvr:
mfspr r3, PVR
blr
.globl ppcDWstore
ppcDWstore:
lfd 1, 0(r4)
stfd 1, 0(r3)
blr
.globl ppcDWload
ppcDWload:
lfd 1, 0(r3)
stfd 1, 0(r4)
blr
/*-------------------------------------------------------------------*/
/*
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment