Convert CONFIG_ARCH_MISC_INIT to Kconfig

This converts the following to Kconfig: CONFIG_ARCH_MISC_INIT Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_ARCH_MISC_INIT to Kconfig
This converts the following to Kconfig: CONFIG_ARCH_MISC_INIT Signed-off-by: Simon Glass <sjg@chromium.org>
4585601a · Simon Glass · Tom Rini · a5d67547 · 4585601a · 4585601a
Commit 4585601a authored Jan 23, 2017 by Simon Glass Committed by Tom Rini Jan 25, 2017
80 changed files
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -26,6 +26,7 @@ config AVR32

 config BLACKFIN
 	bool "Blackfin architecture"
+	select ARCH_MISC_INIT

 config M68K
 	bool "M68000 architecture"

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -202,6 +202,7 @@ config KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
+	select ARCH_MISC_INIT

 config ARCH_MVEBU
 	bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
@@ -517,6 +518,7 @@ config ARCH_MX7
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
 	select BOARD_EARLY_INIT_F
+	select ARCH_MISC_INIT

 config ARCH_MX6
 	bool "Freescale MX6"
@@ -630,6 +632,7 @@ config ARCH_SOCFPGA
 	select DM_SPI
 	select ENABLE_ARM_SOC_BOOT0_HOOK
 	select ARCH_EARLY_INIT_R
+	select ARCH_MISC_INIT

 config TARGET_CM_T43
 	bool "Support cm_t43"
@@ -754,6 +757,7 @@ config TARGET_LS2080A_EMU
 	select ARCH_LS2080A
 	select ARM64
 	select ARMV8_MULTIENTRY
+	select ARCH_MISC_INIT
 	help
 	  Support for Freescale LS2080A_EMU platform
 	  The LS2080A Development System (EMULATOR) is a pre silicon
@@ -765,6 +769,7 @@ config TARGET_LS2080A_SIMU
 	select ARCH_LS2080A
 	select ARM64
 	select ARMV8_MULTIENTRY
+	select ARCH_MISC_INIT
 	help
 	  Support for Freescale LS2080A_SIMU platform
 	  The LS2080A Development System (QDS) is a pre silicon
@@ -778,6 +783,7 @@ config TARGET_LS2080AQDS
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
+	select ARCH_MISC_INIT
 	help
 	  Support for Freescale LS2080AQDS platform
 	  The LS2080A Development System (QDS) is a high-performance
@@ -791,6 +797,7 @@ config TARGET_LS2080ARDB
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
+	select ARCH_MISC_INIT
 	help
 	  Support for Freescale LS2080ARDB platform.
 	  The LS2080A Reference design board (RDB) is a high-performance

--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -9,6 +9,7 @@ config ARMADA_32BIT
 	select SPL_OF_CONTROL
 	select SPL_SIMPLE_BUS
 	select BOARD_EARLY_INIT_F
+	select ARCH_MISC_INIT

 config ARMADA_64BIT
 	bool

--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -171,8 +171,6 @@
 	}
 #endif

-#define CONFIG_ARCH_MISC_INIT
-
 #define CONFIG_CPU CONFIG_BFIN_CPU

 #endif
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -410,6 +410,14 @@ config ARCH_EARLY_INIT_R
 	  is on. Note that board_early_init_r() is called first, if
 	  enabled. This can be used to set up architecture-specific devices.

+config ARCH_MISC_INIT
+	bool "Call arch-specific init after relocation, when console is ready"
+	help
+	  With this option U-Boot will call arch_misc_init() after
+	  relocation to allow miscellaneous arch-dependent initialisation
+	  to be performed. This function should be defined by the board
+	  and will be called after the console is set up, after relocaiton.
+
 config BOARD_EARLY_INIT_F
 	bool "Call board-specific init before relocation"
 	default y if X86

--- a/configs/am335x_baltos_defconfig
+++ b/configs/am335x_baltos_defconfig
@@ -21,6 +21,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_MTD_SUPPORT=y

--- a/configs/am335x_boneblack_defconfig
+++ b/configs/am335x_boneblack_defconfig
@@ -8,6 +8,7 @@ CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y

--- a/configs/am335x_boneblack_vboot_defconfig
+++ b/configs/am335x_boneblack_vboot_defconfig
@@ -11,6 +11,7 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y

--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -9,6 +9,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_MTD_SUPPORT=y

--- a/configs/am335x_evm_nor_defconfig
+++ b/configs/am335x_evm_nor_defconfig
@@ -8,6 +8,7 @@ CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_MTD_SUPPORT=y

--- a/configs/am335x_evm_norboot_defconfig
+++ b/configs/am335x_evm_norboot_defconfig
@@ -7,6 +7,7 @@ CONFIG_FIT=y
 CONFIG_NOR_BOOT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_ASKENV=y

--- a/configs/am335x_evm_spiboot_defconfig
+++ b/configs/am335x_evm_spiboot_defconfig
@@ -11,6 +11,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT"
 CONFIG_SPI_BOOT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y

--- a/configs/am335x_evm_usbspl_defconfig
+++ b/configs/am335x_evm_usbspl_defconfig
@@ -7,6 +7,7 @@ CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_MTD_SUPPORT=y

--- a/configs/apalis_t30_defconfig
+++ b/configs/apalis_t30_defconfig
@@ -7,6 +7,7 @@ CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SYS_PROMPT="Apalis T30 # "
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set

--- a/configs/apx4devkit_defconfig
+++ b/configs/apx4devkit_defconfig
@@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

--- a/configs/bayleybay_defconfig
+++ b/configs/bayleybay_defconfig
@@ -19,6 +19,7 @@ CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_ARCH_EARLY_INIT_R is not set
 # CONFIG_BOARD_EARLY_INIT_F is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/bg0900_defconfig
+++ b/configs/bg0900_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

--- a/configs/birdland_bav335a_defconfig
+++ b/configs/birdland_bav335a_defconfig
@@ -18,6 +18,7 @@ CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y

--- a/configs/birdland_bav335b_defconfig
+++ b/configs/birdland_bav335b_defconfig
@@ -18,6 +18,7 @@ CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y

--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

--- a/configs/brppt1_nand_defconfig
+++ b/configs/brppt1_nand_defconfig
@@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

--- a/configs/brppt1_spi_defconfig
+++ b/configs/brppt1_spi_defconfig
@@ -22,6 +22,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

--- a/configs/brxre1_defconfig
+++ b/configs/brxre1_defconfig
@@ -17,6 +17,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

--- a/configs/colibri_t20_defconfig
+++ b/configs/colibri_t20_defconfig
@@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri"
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SYS_PROMPT="Colibri T20 # "
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set

--- a/configs/colibri_t30_defconfig
+++ b/configs/colibri_t30_defconfig
@@ -7,6 +7,7 @@ CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SYS_PROMPT="Colibri T30 # "
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set

--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_I
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Colibri VFxx # "

--- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig
+++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig
@@ -16,6 +16,7 @@ CONFIG_FIT_SIGNATURE=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/conga-qeval20-qa3-e3845_defconfig
+++ b/configs/conga-qeval20-qa3-e3845_defconfig
@@ -15,6 +15,7 @@ CONFIG_FIT_SIGNATURE=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/draco_defconfig
+++ b/configs/draco_defconfig
@@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot# "
 CONFIG_AUTOBOOT_KEYED=y

--- a/configs/edminiv2_defconfig
+++ b/configs/edminiv2_defconfig
@@ -8,6 +8,7 @@ CONFIG_IDENT_STRING=" EDMiniV2"
 # CONFIG_MMC is not set
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_HUSH_PARSER=y

--- a/configs/etamin_defconfig
+++ b/configs/etamin_defconfig
@@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot# "
 CONFIG_AUTOBOOT_KEYED=y

--- a/configs/galileo_defconfig
+++ b/configs/galileo_defconfig
@@ -12,6 +12,7 @@ CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/m28evk_defconfig
+++ b/configs/m28evk_defconfig
@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

--- a/configs/minnowmax_defconfig
+++ b/configs/minnowmax_defconfig
@@ -18,6 +18,7 @@ CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_BOARD_EARLY_INIT_F is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/mx23_olinuxino_defconfig
+++ b/configs/mx23_olinuxino_defconfig
@@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/mx23evk_defconfig
+++ b/configs/mx23evk_defconfig
@@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=1
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

--- a/configs/mx28evk_auart_console_defconfig
+++ b/configs/mx28evk_auart_console_defconfig
@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=1
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

--- a/configs/mx28evk_defconfig
+++ b/configs/mx28evk_defconfig
@@ -12,6 +12,7 @@ CONFIG_BOOTDELAY=1
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

--- a/configs/mx28evk_nand_defconfig
+++ b/configs/mx28evk_nand_defconfig
@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=1
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

--- a/configs/mx28evk_spi_defconfig
+++ b/configs/mx28evk_spi_defconfig
@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=1
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

--- a/configs/pcm051_rev1_defconfig
+++ b/configs/pcm051_rev1_defconfig
@@ -17,6 +17,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="REV1"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_ETH_SUPPORT=y
 CONFIG_SPL_NET_SUPPORT=y

--- a/configs/pcm051_rev3_defconfig
+++ b/configs/pcm051_rev3_defconfig
@@ -17,6 +17,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="REV3"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_ETH_SUPPORT=y
 CONFIG_SPL_NET_SUPPORT=y

--- a/configs/pengwyn_defconfig
+++ b/configs/pengwyn_defconfig
@@ -17,6 +17,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_ETH_SUPPORT=y
 CONFIG_SPL_MTD_SUPPORT=y

--- a/configs/pxm2_defconfig
+++ b/configs/pxm2_defconfig
@@ -25,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot# "
 CONFIG_AUTOBOOT_KEYED=y

--- a/configs/rastaban_defconfig
+++ b/configs/rastaban_defconfig
@@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot# "
 CONFIG_AUTOBOOT_KEYED=y

--- a/configs/rut_defconfig
+++ b/configs/rut_defconfig
@@ -26,6 +26,7 @@ CONFIG_ARCH_EARLY_INIT_R=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot# "
 CONFIG_AUTOBOOT_KEYED=y

--- a/configs/sansa_fuze_plus_defconfig
+++ b/configs/sansa_fuze_plus_defconfig
@@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

--- a/configs/sc_sps_1_defconfig
+++ b/configs/sc_sps_1_defconfig
@@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

--- a/configs/som-db5800-som-6867_defconfig
+++ b/configs/som-db5800-som-6867_defconfig
@@ -15,6 +15,7 @@ CONFIG_FIT_SIGNATURE=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/thuban_defconfig
+++ b/configs/thuban_defconfig
@@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot# "
 CONFIG_AUTOBOOT_KEYED=y

--- a/configs/ts4600_defconfig
+++ b/configs/ts4600_defconfig
@@ -8,6 +8,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/xfi3_defconfig
+++ b/configs/xfi3_defconfig
@@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -260,7 +260,6 @@
 * and DFU.
 */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0

--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -13,8 +13,6 @@

 #include "tegra30-common.h"

-#define CONFIG_ARCH_MISC_INIT
-
 /* High-level configuration options */
 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */


--- a/include/configs/aspenite.h
+++ b/include/configs/aspenite.h
@@ -35,7 +35,6 @@
 * to enable certain macros
 */
 #include "mv-common.h"
-#undef CONFIG_ARCH_MISC_INIT

 /*
 * Environment variables configurations

--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -293,7 +293,6 @@
 * and DFU.
 */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0

--- a/include/configs/bav335x.h
+++ b/include/configs/bav335x.h
@@ -430,7 +430,6 @@ DEFAULT_LINUX_BOOT_ENV \
 * and DFU.
 */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0

--- a/include/configs/bayleybay.h
+++ b/include/configs/bayleybay.h
@@ -14,7 +14,6 @@
 #include <configs/x86-common.h>

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_MISC_INIT

 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,usbkbd\0" \
 					"stdout=serial,vidconsole\0" \

--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -232,7 +232,6 @@ MMCARGS

 /* USB configuration */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0

--- a/include/configs/brxre1.h
+++ b/include/configs/brxre1.h
@@ -108,7 +108,6 @@ BUR_COMMON_ENV \

 /* USB configuration */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0

--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -19,8 +19,6 @@
 /*#define CONFIG_DBG_MONITOR*/
 #define PHYS_SDRAM_SIZE			SZ_512M

-#define CONFIG_ARCH_MISC_INIT
-
 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */

 #define CONFIG_ENV_VARS_UBOOT_CONFIG

--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -11,8 +11,6 @@

 #include "tegra20-common.h"

-#define CONFIG_ARCH_MISC_INIT
-
 /* High-level configuration options */
 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */


--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -13,8 +13,6 @@

 #include "tegra30-common.h"

-#define CONFIG_ARCH_MISC_INIT
-
 /* High-level configuration options */
 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */


--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -18,7 +18,6 @@
 #define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_FSL_CLK

-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */

 #define CONFIG_SKIP_LOWLEVEL_INIT

--- a/include/configs/conga-qeval20-qa3-e3845.h
+++ b/include/configs/conga-qeval20-qa3-e3845.h
@@ -14,7 +14,6 @@
 #include <configs/x86-common.h>

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_MISC_INIT

 #define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial\0" \
 					"stdout=serial\0" \

--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -209,7 +209,6 @@
 * Other required minimal configurations
 */
 #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT		/* call arch_misc_init() */
 #define CONFIG_NR_DRAM_BANKS		1

 #define CONFIG_SYS_LOAD_ADDR		0x00800000

--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@@ -14,7 +14,6 @@
 #include <configs/x86-common.h>

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_MISC_INIT

 /* ns16550 UART is memory-mapped in Quark SoC */
 #undef  CONFIG_SYS_NS16550_PORT_MAPPED

--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -79,7 +79,6 @@
 * to enable certain macros
 */
 #include "mv-common.h"
-#undef CONFIG_ARCH_MISC_INIT

 #ifdef CONFIG_SYS_NS16550_COM1
 #undef CONFIG_SYS_NS16550_COM1

--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -147,7 +147,6 @@
 * Other required minimal configurations
 */
 #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT		/* call arch_misc_init() */
 #define CONFIG_NR_DRAM_BANKS	4
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */


--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -20,7 +20,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)

 /* We need architecture specific misc initializations */
-#define CONFIG_ARCH_MISC_INIT

 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */


--- a/include/configs/minnowmax.h
+++ b/include/configs/minnowmax.h
@@ -14,7 +14,6 @@
 #include <configs/x86-common.h>

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_MISC_INIT

 #define CONFIG_SMSC_LPC47M


--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -84,7 +84,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */

--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -29,8 +29,6 @@
 /* Enable iomux-lpsr support */
 #define CONFIG_IOMUX_LPSR

-#define CONFIG_ARCH_MISC_INIT
-
 #define CONFIG_LOADADDR                 0x80800000
 #define CONFIG_SYS_TEXT_BASE            0x87800000


--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -42,7 +42,6 @@
 */

 /* Startup hooks */
-#define CONFIG_ARCH_MISC_INIT

 /* SPL */
 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE

--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -132,7 +132,6 @@
 * USB configuration
 */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL

--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -183,7 +183,6 @@
 * add mass storage support.
 */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0

--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -190,7 +190,6 @@
 * USB configuration
 */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #undef CONFIG_USB_GADGET_DUALSPEED

--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -15,7 +15,6 @@
 * High level configuration
 */
 #define CONFIG_DISPLAY_BOARDINFO_LATE
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_SYS_NO_FLASH