Commit 5052a771 authored by Kumar Gala's avatar Kumar Gala
Browse files

ppc/85xx: Cleanup makefile and related optional files



Cleaned up cpu/mpc85xx/Makefile to use CONFIG_* for those obvious cases
we have like PCI, CPM2, QE.  Also reworked it to use one line per file
for everything and sorted in alphabetical order.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 74c5dfd8
......@@ -29,10 +29,10 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o
SOBJS-$(CONFIG_MP) += release.o
SOBJS-$(CONFIG_MP) += release.o
SOBJS = $(SOBJS-y)
COBJS-$(CONFIG_MP) += mp.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
COBJS-$(CONFIG_CPM2) += commproc.o
# supports ddr1
COBJS-$(CONFIG_MPC8540) += ddr-gen1.o
......@@ -54,10 +54,21 @@ COBJS-$(CONFIG_P1020) += ddr-gen3.o
COBJS-$(CONFIG_P2010) += ddr-gen3.o
COBJS-$(CONFIG_P2020) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
COBJS-$(CONFIG_MP) += mp.o
COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o tlb.o \
pci.o serial_scc.o commproc.o ether_fcc.o qe_io.o \
$(COBJS-y)
COBJS-$(CONFIG_PCI) += pci.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
COBJS = $(COBJS-y)
COBJS += cpu.o
COBJS += cpu_init.o
COBJS += interrupts.o
COBJS += speed.o
COBJS += tlb.o
COBJS += traps.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
......
......@@ -26,7 +26,6 @@
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CPM2)
/*
* because we have stack and init data in dual port ram
* we must reduce the size
......@@ -204,5 +203,3 @@ ulong post_word_load (void)
}
#endif /* CONFIG_POST */
#endif /* CONFIG_CPM2 */
......@@ -52,8 +52,6 @@
#include <miiphy.h>
#endif
#if defined(CONFIG_CPM2)
#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \
defined(CONFIG_NET_MULTI)
......@@ -469,5 +467,3 @@ int fec_initialize(bd_t *bis)
}
#endif
#endif /* CONFIG_CPM2 */
......@@ -29,7 +29,7 @@
#include <asm/cpm_85xx.h>
#include <pci.h>
#if defined(CONFIG_PCI) && !defined(CONFIG_FSL_PCI_INIT)
#if !defined(CONFIG_FSL_PCI_INIT)
#ifndef CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
......@@ -227,4 +227,4 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
hose->last_busno = pci_hose_scan(hose);
#endif
}
#endif /* CONFIG_PCI */
#endif /* !CONFIG_FSL_PCI_INIT */
......@@ -37,7 +37,6 @@
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CPM2)
#if defined(CONFIG_CONS_ON_SCC)
#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
......@@ -267,5 +266,3 @@ serial_tstc()
}
#endif /* CONFIG_CONS_ON_SCC */
#endif /* CONFIG_CPM2 */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment