Commit 53cf9435 authored by stroese's avatar stroese
Browse files

- CFG_RX_ETH_BUFFER added.

parent c6028835
...@@ -690,7 +690,7 @@ The following options need to be configured: ...@@ -690,7 +690,7 @@ The following options need to be configured:
- NETWORK Support (PCI): - NETWORK Support (PCI):
CONFIG_E1000 CONFIG_E1000
Support for Intel 8254x gigabit chips. Support for Intel 8254x gigabit chips.
CONFIG_EEPRO100 CONFIG_EEPRO100
Support for Intel 82557/82559/82559ER chips. Support for Intel 82557/82559/82559ER chips.
Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom
...@@ -1442,6 +1442,14 @@ Configuration Settings: ...@@ -1442,6 +1442,14 @@ Configuration Settings:
Define if the flash driver uses extra elements in the Define if the flash driver uses extra elements in the
common flash structure for storing flash geometry common flash structure for storing flash geometry
- CFG_RX_ETH_BUFFER:
Defines the number of ethernet receive buffers. On some
ethernet controllers it is recommended to set this value
to 8 or even higher (EEPRO100 or 405 EMAC), since all
buffers can be full shortly after enabling the interface
on high ethernet traffic.
Defaults to 4 if not defined.
The following definitions that deal with the placement and management The following definitions that deal with the placement and management
of environment data (variable area); in general, we support the of environment data (variable area); in general, we support the
following configurations: following configurations:
......
...@@ -125,6 +125,10 @@ ...@@ -125,6 +125,10 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* NAND-FLASH stuff * NAND-FLASH stuff
*----------------------------------------------------------------------- *-----------------------------------------------------------------------
......
...@@ -144,7 +144,7 @@ ...@@ -144,7 +144,7 @@
/* /*
* NS16550 Configuration * NS16550 Configuration
*/ */
#define CFG_NS16550 #define CFG_NS16550
#define CFG_NS16550_SERIAL #define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 1 #define CFG_NS16550_REG_SIZE 1
...@@ -171,7 +171,7 @@ ...@@ -171,7 +171,7 @@
* Memory configuration using SPD information stored on the SODIMMs * Memory configuration using SPD information stored on the SODIMMs
* not yet supported. * not yet supported.
*/ */
#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */ #define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */
/* Bit-field values for MCCR1. /* Bit-field values for MCCR1.
...@@ -186,7 +186,7 @@ ...@@ -186,7 +186,7 @@
#else #else
# error "SDRAM size not supported" # error "SDRAM size not supported"
#endif #endif
#define CFG_BANK1_ROW 0 #define CFG_BANK1_ROW 0
#define CFG_BANK2_ROW 0 #define CFG_BANK2_ROW 0
#define CFG_BANK3_ROW 0 #define CFG_BANK3_ROW 0
#define CFG_BANK4_ROW 0 #define CFG_BANK4_ROW 0
...@@ -361,7 +361,7 @@ ...@@ -361,7 +361,7 @@
/* IRQ_ENA_2 bit definitions */ /* IRQ_ENA_2 bit definitions */
#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */ #define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */ #define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */ #define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */ #define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */ #define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */ #define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
...@@ -371,9 +371,9 @@ ...@@ -371,9 +371,9 @@
/* IRQ_STAT_2 bit definitions */ /* IRQ_STAT_2 bit definitions */
#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */ #define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */ #define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */ #define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
#define I_STAT_2_RTC 0x10 /* RTC IRQ status */ #define I_STAT_2_RTC 0x10 /* RTC IRQ status */
#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */ #define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */ #define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */ #define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */ #define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
...@@ -421,14 +421,14 @@ ...@@ -421,14 +421,14 @@
#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */ #define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */ #define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */ #define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */ #define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */ #define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */ #define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */ #define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */ #define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */ #define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */ #define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
...@@ -441,6 +441,7 @@ ...@@ -441,6 +441,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define PCI_ENET0_IOADDR 0x00104000 #define PCI_ENET0_IOADDR 0x00104000
#define PCI_ENET0_MEMADDR 0x82000000 #define PCI_ENET0_MEMADDR 0x82000000
......
...@@ -146,6 +146,8 @@ ...@@ -146,6 +146,8 @@
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* PCI stuff * PCI stuff
*----------------------------------------------------------------------- *-----------------------------------------------------------------------
......
...@@ -55,15 +55,7 @@ ...@@ -55,15 +55,7 @@
#endif #endif
#undef CONFIG_BOOTARGS #undef CONFIG_BOOTARGS
#define CONFIG_RAMBOOTCOMMAND \ #define CONFIG_BOOTCOMMAND "bootm 100000" /* default boot command */
"setenv bootargs root=/dev/ram rw nfsroot=$(serverip):$(rootpath) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
"bootm ffc00000 ffca0000"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
"bootm ffc00000"
#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
...@@ -73,12 +65,7 @@ ...@@ -73,12 +65,7 @@
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
#if 0 /* test-only */
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
CONFIG_BOOTP_VENDOREX)
#else
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT) #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT)
#endif
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_DHCP | \ CFG_CMD_DHCP | \
...@@ -147,6 +134,8 @@ ...@@ -147,6 +134,8 @@
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* PCI stuff * PCI stuff
*----------------------------------------------------------------------- *-----------------------------------------------------------------------
...@@ -202,7 +191,7 @@ ...@@ -202,7 +191,7 @@
#define CFG_FLASH_BASE 0xFFFC0000 #define CFG_FLASH_BASE 0xFFFC0000
#define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
/* /*
* For booting Linux, the board info and command line data * For booting Linux, the board info and command line data
...@@ -360,7 +349,7 @@ ...@@ -360,7 +349,7 @@
#define CFG_FPGA_STATUS_TS_IRQ 0x1000 #define CFG_FPGA_STATUS_TS_IRQ 0x1000
#define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */ #define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
#define CFG_FPGA_MAX_SIZE 64*1024 /* 64kByte is enough for XC2S15 */ #define CFG_FPGA_MAX_SIZE 128*1024 /* 128kByte is enough for XC2S30 */
/* FPGA program pin configuration */ /* FPGA program pin configuration */
#define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */ #define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
......
...@@ -304,6 +304,7 @@ ...@@ -304,6 +304,7 @@
#define CFG_ETH_IOBASE 0x00104000 #define CFG_ETH_IOBASE 0x00104000
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define PCI_ENET0_IOADDR 0x00104000 #define PCI_ENET0_IOADDR 0x00104000
#define PCI_ENET0_MEMADDR 0x80000000 #define PCI_ENET0_MEMADDR 0x80000000
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */
...@@ -333,6 +333,7 @@ ...@@ -333,6 +333,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_EEPRO100_SROM_WRITE #define CONFIG_EEPRO100_SROM_WRITE
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */
...@@ -94,6 +94,7 @@ ...@@ -94,6 +94,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 /* Ethernet Express PRO 100 */ #define CONFIG_EEPRO100 /* Ethernet Express PRO 100 */
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define PCI_ENET0_IOADDR 0x80000000 #define PCI_ENET0_IOADDR 0x80000000
#define PCI_ENET0_MEMADDR 0x80000000 #define PCI_ENET0_MEMADDR 0x80000000
......
...@@ -261,6 +261,7 @@ ...@@ -261,6 +261,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_TULIP #define CONFIG_TULIP
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */
...@@ -263,6 +263,7 @@ ...@@ -263,6 +263,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_TULIP #define CONFIG_TULIP
......
...@@ -316,6 +316,7 @@ ...@@ -316,6 +316,7 @@
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
#define CONFIG_PCI_PNP #define CONFIG_PCI_PNP
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#endif #endif
/* /*
......
...@@ -128,6 +128,10 @@ ...@@ -128,6 +128,10 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* PCI stuff * PCI stuff
*----------------------------------------------------------------------- *-----------------------------------------------------------------------
......
...@@ -82,6 +82,7 @@ ...@@ -82,6 +82,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define PCI_ENET0_IOADDR 0x80000000 #define PCI_ENET0_IOADDR 0x80000000
#define PCI_ENET0_MEMADDR 0x80000000 #define PCI_ENET0_MEMADDR 0x80000000
......
...@@ -81,6 +81,7 @@ ...@@ -81,6 +81,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NATSEMI #define CONFIG_NATSEMI
#define CONFIG_NS8382X #define CONFIG_NS8382X
......
...@@ -36,7 +36,7 @@ ...@@ -36,7 +36,7 @@
#define CONFIG_X86 1 /* This is a X86 CPU */ #define CONFIG_X86 1 /* This is a X86 CPU */
#define CONFIG_SC520 1 /* Include support for AMD SC520 */ #define CONFIG_SC520 1 /* Include support for AMD SC520 */
#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */ #define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */
#define CFG_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */ #define CFG_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
#define CFG_SDRAM_RAS_CAS_DELAY 3 /* 3T */ #define CFG_SDRAM_RAS_CAS_DELAY 3 /* 3T */
...@@ -71,7 +71,7 @@ ...@@ -71,7 +71,7 @@
#define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTDELAY 15
#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) " #define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm" #define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
...@@ -123,7 +123,7 @@ ...@@ -123,7 +123,7 @@
#define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */ #define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */
#define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */ #define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */
#define CONFIG_DS1722 /* Dallas DS1722 SPI Temperature probe */ #define CONFIG_DS1722 /* Dallas DS1722 SPI Temperature probe */
/* allow to overwrite serial and ethaddr */ /* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_OVERWRITE
...@@ -131,7 +131,7 @@ ...@@ -131,7 +131,7 @@
#if 0 #if 0
/* Environment in flash */ /* Environment in flash */
#define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_IS_IN_FLASH 1
# define CFG_ENV_ADDR (0x387a0000) /* Addr of Environment Sector */ # define CFG_ENV_ADDR (0x387a0000) /* Addr of Environment Sector */
# define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector (or 0x10000) */ # define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector (or 0x10000) */
# define CFG_ENV_OFFSET 0 # define CFG_ENV_OFFSET 0
...@@ -143,7 +143,7 @@ ...@@ -143,7 +143,7 @@
# define CONFIG_SPI # define CONFIG_SPI
# define CONFIG_SPI_X 1 # define CONFIG_SPI_X 1
# define CFG_ENV_SIZE 0x2000 /* Total Size of Environment EEPROM */ # define CFG_ENV_SIZE 0x2000 /* Total Size of Environment EEPROM */
# define CFG_ENV_OFFSET 0x1c00 # define CFG_ENV_OFFSET 0x1c00
#endif #endif
...@@ -155,6 +155,7 @@ ...@@ -155,6 +155,7 @@
*/ */
#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
/************************************************************ /************************************************************
* IDE/ATA stuff * IDE/ATA stuff
...@@ -204,8 +205,8 @@ ...@@ -204,8 +205,8 @@
#define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCI_SCAN_SHOW
#define CFG_FIRST_PCI_IRQ 9 #define CFG_FIRST_PCI_IRQ 9
#define CFG_SECOND_PCI_IRQ 10 #define CFG_SECOND_PCI_IRQ 10
#define CFG_THIRD_PCI_IRQ 11 #define CFG_THIRD_PCI_IRQ 11
#define CFG_FORTH_PCI_IRQ 12 #define CFG_FORTH_PCI_IRQ 12
......
...@@ -125,6 +125,7 @@ protect on $(u-boot_startaddr) $(u-boot_endaddr)" ...@@ -125,6 +125,7 @@ protect on $(u-boot_startaddr) $(u-boot_endaddr)"
#define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCI_SCAN_SHOW
#define CONFIG_NET_MULTI #define CONFIG_NET_MULTI
#define CONFIG_EEPRO100 #define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_EEPRO100_SROM_WRITE #define CONFIG_EEPRO100_SROM_WRITE
#define PCI_ENET0_IOADDR 0xF0000000 #define PCI_ENET0_IOADDR 0xF0000000
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment