Commit 55774b51 authored by Nobuhiro Iwamatsu's avatar Nobuhiro Iwamatsu Committed by Wolfgang Denk
Browse files

pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option



In current source code, when the device number of PCI is 0, process PCI
bridge without fail. However, when the device number is 0, it is not PCI
always bridge. There are times when device of PCI allocates.

When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
use this patch.
Signed-off-by: default avatarNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: default avatarStefan Roese <sr@denx.de>
parent 86aea3ea
......@@ -425,6 +425,9 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
dev += PCI_BDF(0,0,1))
{
/* Bus 0 is not necessarily PCI bridge. */
#if defined(CONFIG_PCI_SKIP_HOST_BRIDGE)
/* Skip our host bridge */
if ( dev == PCI_BDF(hose->first_busno,0,0) ) {
#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */
......@@ -434,10 +437,11 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
if (getenv("pciconfighost") == NULL) {
continue; /* Skip our host bridge */
}
#else
#else /* CONFIG_PCI_CONFIG_HOST_BRIDGE */
continue; /* Skip our host bridge */
#endif
#endif /* CONFIG_PCI_CONFIG_HOST_BRIDGE */
}
#endif /* CONFIG_PCI_SKIP_HOST_BRIDGE */
if (PCI_FUNC(dev) && !found_multi)
continue;
......@@ -473,8 +477,11 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
hose->fixup_irq(hose, dev);
#ifdef CONFIG_PCI_SCAN_SHOW
#if defined(CONFIG_PCI_SKIP_HOST_BRIDGE)
/* Skip our host bridge */
if ( dev != PCI_BDF(hose->first_busno,0,0) ) {
if ( dev != PCI_BDF(hose->first_busno,0,0) )
#endif
{
unsigned char int_line;
pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment