Commit 5725f94a authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

Cleanup MCC200 board configuration; omit non-existent stuff.

parent 0b6ba547
......@@ -2,6 +2,8 @@
Changes since U-Boot 1.1.4:
======================================================================
* Cleanup MCC200 board configuration; omit non-existent stuff.
* Add support for MPC859/866 Rev. A.0
* Add command for handling DDR ECC registers on MPC8349EE MDS board.
......
......@@ -67,13 +67,8 @@
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
ADD_USB_CMD | \
CFG_CMD_BEDBUG | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
CFG_CMD_FAT | \
CFG_CMD_I2C | \
CFG_CMD_NFS | \
CFG_CMD_SNTP )
CFG_CMD_I2C)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
......@@ -131,25 +126,11 @@
* I2C configuration
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */
#define CFG_I2C_SPEED 100000 /* 100 kHz */
#define CFG_I2C_SLAVE 0x7F
/*
* EEPROM configuration
*/
#define CFG_I2C_EEPROM_ADDR 0x58
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
/*
* RTC configuration
*/
#define CONFIG_RTC_PCF8563
#define CFG_I2C_RTC_ADDR 0x51
/*
* Flash configuration (8,16 or 32 MB)
* TEXT base always at 0xFFF00000
......@@ -231,7 +212,7 @@
*/
/* 0x10000004 = 32MB SDRAM */
/* 0x90000004 = 64MB SDRAM */
#define CFG_GPS_PORT_CONFIG 0x10000004
#define CFG_GPS_PORT_CONFIG 0x00000004
/*
* Miscellaneous configurable options
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment