Commit 58ec4866 authored by Trent Piepho's avatar Trent Piepho Committed by Andrew Fleming-AFLEMING
Browse files

mpc8[56]xx: Put localbus clock in device tree

Export the localbus frequency in the device tree, the same way the CPU, TB,
CCB, and various other frequencies are exported in their respective device
tree nodes.

Some localbus devices need this information to be programed correctly, so
it makes sense to export it along with the other frequencies.

Unfortunately, when someone wrote the localbus dts bindings, they didn't
bother to define what the "compatible" property should be.  So it seems no
one was quite sure what to put in their dts files.

Based on current existing dts files in the kernel source, I've used
"fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
of the 85xx devices, and are looked for by the Linux code.  The eLBC is
apparently not entirely backward compatible with the pq3 LBC and so eLBC
equipped platforms like 8572 won't use pq3-localbus.

For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
and is also looked for by the Linux code.  On MPC8641, I've also used
"fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
which don't use "fsl,elbc" or any other acceptable name to match on.
Signed-off-by: default avatarTrent Piepho <>
Acked-by: default avatarKumar Gala <>
Acked-by: default avatarJon Loeliger <>
parent 9d94aff6
......@@ -28,11 +28,12 @@
#include <fdt_support.h>
#include <asm/processor.h>
extern void ft_qe_setup(void *blob);
#ifdef CONFIG_MP
#include "mp.h"
void ft_fixup_cpu(void *blob, u64 memory_limit)
......@@ -231,6 +232,11 @@ void ft_cpu_setup(void *blob, bd_t *bd)
"clock-frequency", bd->bi_intfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
"bus-frequency", gd->lbc_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,elbc",
"bus-frequency", gd->lbc_clk, 1);
#ifdef CONFIG_QE
......@@ -13,6 +13,8 @@
void ft_cpu_setup(void *blob, bd_t *bd)
......@@ -29,6 +31,13 @@ void ft_cpu_setup(void *blob, bd_t *bd)
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
#if defined(CONFIG_MPC8641)
do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus",
"bus-frequency", gd->lbc_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,elbc",
"bus-frequency", gd->lbc_clk, 1);
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment