Commit 59efa051 authored by Stefan Roese's avatar Stefan Roese Committed by Stefano Babic

arm: imx: Change iomux functions to void type

They never return anything also than 0, so lets change the function
to void instead.
Signed-off-by: default avatarStefan Roese <sr@denx.de>
Reviewed-by: default avatarMarek Vasut <marex@denx.de>
parent 8b360c06
......@@ -30,7 +30,7 @@ static void *base = (void *)IOMUXC_BASE_ADDR;
/*
* configures a single pad in the iomuxer
*/
int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
{
u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
......@@ -50,22 +50,14 @@ int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
return 0;
}
int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
unsigned count)
void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
unsigned count)
{
iomux_v3_cfg_t const *p = pad_list;
int i;
int ret;
for (i = 0; i < count; i++) {
ret = imx_iomux_v3_setup_pad(*p);
if (ret)
return ret;
p++;
}
return 0;
for (i = 0; i < count; i++)
imx_iomux_v3_setup_pad(*p++);
}
......@@ -97,8 +97,8 @@ typedef u64 iomux_v3_cfg_t;
#define MUX_CONFIG_SION (0x1 << 4)
int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
unsigned count);
#endif /* __MACH_IOMUX_V3_H__*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment