Commit 5b9ce0e2 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Marek Vasut
Browse files

usb: dwc3: Makefile: Make dwc3 driver compile in u-boot



Now that the entire dwc3 driver is adapted to compile with uboot build,
modify the Makefiles so that the dwc3 driver can be built.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: default avatarLukasz Majewski <l.majewski@samsung.com>
parent 8d488f3e
......@@ -650,8 +650,10 @@ libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/eth/
libs-y += drivers/usb/gadget/
libs-y += drivers/usb/gadget/udc/
libs-y += drivers/usb/host/
libs-y += drivers/usb/musb/
libs-y += drivers/usb/musb-new/
......
ccflags-$(CONFIG_USB_DWC3_DEBUG) := -DDEBUG
ccflags-$(CONFIG_USB_DWC3_VERBOSE) += -DVERBOSE_DEBUG
obj-$(CONFIG_USB_DWC3) += dwc3.o
dwc3-y := core.o debug.o
ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
dwc3-y += host.o
endif
ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
dwc3-y += gadget.o ep0.o
endif
ifneq ($(CONFIG_DEBUG_FS),)
dwc3-y += debugfs.o
endif
dwc3-y := core.o
##
# Platform-specific glue layers go here
#
# NOTICE: Make sure your glue layer doesn't depend on anything
# which is arch-specific and that it compiles on all situations.
#
# We want to keep this requirement in order to be able to compile
# the entire driver (with all its glue layers) on several architectures
# and make sure it compiles fine. This will also help with allmodconfig
# and allyesconfig builds.
##
dwc3-y += gadget.o ep0.o
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o
obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o
#
# USB peripheral controller drivers
#
obj-$(CONFIG_USB_GADGET) += udc-core.o
obj-$(CONFIG_USB_DWC3_GADGET) += udc-core.o
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment