Commit 5c0beb5c authored by Stephen Warren's avatar Stephen Warren Committed by Marek Vasut
Browse files

usb: dwc2: use phys_to_bus/bus_to_phys



Use of these APIs is required on the Raspberry Pi. With this change, USB
on RPi1 should be more reliable, and USB on the RPi2 will start working.
Signed-off-by: default avatarStephen Warren <swarren@wwwdotorg.org>
parent 79340db7
......@@ -9,6 +9,7 @@
#include <errno.h>
#include <usb.h>
#include <malloc.h>
#include <phys2bus.h>
#include <usbroothubdes.h>
#include <asm/io.h>
......@@ -795,7 +796,8 @@ int chunk_msg(struct usb_device *dev, unsigned long pipe, int *pid, int in,
if (!in)
memcpy(aligned_buffer, (char *)buffer + done, len);
writel((uint32_t)aligned_buffer, &hc_regs->hcdma);
writel(phys_to_bus((unsigned long)aligned_buffer),
&hc_regs->hcdma);
/* Set host channel enable after all other setup is complete. */
clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment