Commit 6bf4ca07 authored by Heiko Schocher's avatar Heiko Schocher Committed by Tom Rini
Browse files

tools, fit: add fit_info host command



add fit_info command to the host tools. This command prints
the name, offset and the len from a property from a node in
a fit file. This info can be used to extract a properties
data with linux tools, for example "dd".
Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
Acked-by: default avatarSimon Glass <sjg@chromium.org>
parent bf007ebb
/bmp_logo
/envcrc
/fit_info
/gen_eth_addr
/img2srec
/kwboot
......
......@@ -60,6 +60,9 @@ hostprogs-y += mkenvimage$(SFX)
mkenvimage$(SFX)-objs := crc32.o mkenvimage.o os_support.o
hostprogs-y += dumpimage$(SFX) mkimage$(SFX)
ifdef CONFIG_FIT_SIGNATURE
hostprogs-y += fit_info$(SFX)
endif
FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := image-sig.o
# Flattened device tree objects
......@@ -71,6 +74,8 @@ dumpimage-mkimage-objs := aisimage.o \
$(FIT_SIG_OBJS-y) \
crc32.o \
default_image.o \
fdtdec.o \
fit_common.o \
fit_image.o \
image-fit.o \
image-host.o \
......@@ -91,6 +96,7 @@ dumpimage-mkimage-objs := aisimage.o \
dumpimage$(SFX)-objs := $(dumpimage-mkimage-objs) dumpimage.o
mkimage$(SFX)-objs := $(dumpimage-mkimage-objs) mkimage.o
fit_info$(SFX)-objs := $(dumpimage-mkimage-objs) fit_info.o
# TODO(sjg@chromium.org): Is this correct on Mac OS?
......@@ -98,6 +104,7 @@ mkimage$(SFX)-objs := $(dumpimage-mkimage-objs) mkimage.o
ifneq ($(CONFIG_MX23)$(CONFIG_MX28),)
HOSTLOADLIBES_dumpimage$(SFX) := -lssl -lcrypto
HOSTLOADLIBES_mkimage$(SFX) := -lssl -lcrypto
HOSTLOADLIBES_fit_info$(SFX) := -lssl -lcrypto
# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
# the mxsimage support within tools/mxsimage.c .
HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
......@@ -106,6 +113,7 @@ endif
ifdef CONFIG_FIT_SIGNATURE
HOSTLOADLIBES_dumpimage$(SFX) := -lssl -lcrypto
HOSTLOADLIBES_mkimage$(SFX) := -lssl -lcrypto
HOSTLOADLIBES_fit_info$(SFX) := -lssl -lcrypto
# This affects include/image.h, but including the board config file
# is tricky, so manually define this options here.
......
/*
* (C) Copyright 2014
* DENX Software Engineering
* Heiko Schocher <hs@denx.de>
*
* (C) Copyright 2008 Semihalf
*
* (C) Copyright 2000-2004
* DENX Software Engineering
* Wolfgang Denk, wd@denx.de
*
* Updated-by: Prafulla Wadaskar <prafulla@marvell.com>
* FIT image specific code abstracted from mkimage.c
* some functions added to address abstraction
*
* All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "imagetool.h"
#include "mkimage.h"
#include "fit_common.h"
#include <image.h>
#include <u-boot/crc.h>
int fit_verify_header(unsigned char *ptr, int image_size,
struct image_tool_params *params)
{
return fdt_check_header(ptr);
}
int fit_check_image_types(uint8_t type)
{
if (type == IH_TYPE_FLATDT)
return EXIT_SUCCESS;
else
return EXIT_FAILURE;
}
int mmap_fdt(char *cmdname, const char *fname, void **blobp,
struct stat *sbuf, int useunlink)
{
void *ptr;
int fd;
/* Load FIT blob into memory (we need to write hashes/signatures) */
fd = open(fname, O_RDWR | O_BINARY);
if (fd < 0) {
fprintf(stderr, "%s: Can't open %s: %s\n",
cmdname, fname, strerror(errno));
if (useunlink)
unlink(fname);
return -1;
}
if (fstat(fd, sbuf) < 0) {
fprintf(stderr, "%s: Can't stat %s: %s\n",
cmdname, fname, strerror(errno));
if (useunlink)
unlink(fname);
return -1;
}
errno = 0;
ptr = mmap(0, sbuf->st_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
if ((ptr == MAP_FAILED) || (errno != 0)) {
fprintf(stderr, "%s: Can't read %s: %s\n",
cmdname, fname, strerror(errno));
if (useunlink)
unlink(fname);
return -1;
}
/* check if ptr has a valid blob */
if (fdt_check_header(ptr)) {
fprintf(stderr, "%s: Invalid FIT blob\n", cmdname);
if (useunlink)
unlink(fname);
return -1;
}
*blobp = ptr;
return fd;
}
/*
* (C) Copyright 2014
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _FIT_COMMON_H_
#define _FIT_COMMON_H_
#include "imagetool.h"
#include "mkimage.h"
#include <image.h>
int fit_verify_header(unsigned char *ptr, int image_size,
struct image_tool_params *params);
int fit_check_image_types(uint8_t type);
int mmap_fdt(char *cmdname, const char *fname, void **blobp,
struct stat *sbuf, int useunlink);
#endif /* _FIT_COMMON_H_ */
......@@ -15,68 +15,13 @@
*/
#include "imagetool.h"
#include "fit_common.h"
#include "mkimage.h"
#include <image.h>
#include <u-boot/crc.h>
static image_header_t header;
static int fit_verify_header (unsigned char *ptr, int image_size,
struct image_tool_params *params)
{
return fdt_check_header(ptr);
}
static int fit_check_image_types (uint8_t type)
{
if (type == IH_TYPE_FLATDT)
return EXIT_SUCCESS;
else
return EXIT_FAILURE;
}
int mmap_fdt(struct image_tool_params *params, const char *fname, void **blobp,
struct stat *sbuf)
{
void *ptr;
int fd;
/* Load FIT blob into memory (we need to write hashes/signatures) */
fd = open(fname, O_RDWR | O_BINARY);
if (fd < 0) {
fprintf(stderr, "%s: Can't open %s: %s\n",
params->cmdname, fname, strerror(errno));
unlink(fname);
return -1;
}
if (fstat(fd, sbuf) < 0) {
fprintf(stderr, "%s: Can't stat %s: %s\n",
params->cmdname, fname, strerror(errno));
unlink(fname);
return -1;
}
ptr = mmap(0, sbuf->st_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
if (ptr == MAP_FAILED) {
fprintf(stderr, "%s: Can't read %s: %s\n",
params->cmdname, fname, strerror(errno));
unlink(fname);
return -1;
}
/* check if ptr has a valid blob */
if (fdt_check_header(ptr)) {
fprintf(stderr, "%s: Invalid FIT blob\n", params->cmdname);
unlink(fname);
return -1;
}
*blobp = ptr;
return fd;
}
/**
* fit_handle_file - main FIT file processing function
*
......@@ -129,13 +74,14 @@ static int fit_handle_file(struct image_tool_params *params)
}
if (params->keydest) {
destfd = mmap_fdt(params, params->keydest, &dest_blob, &sbuf);
destfd = mmap_fdt(params->cmdname, params->keydest,
&dest_blob, &sbuf, 1);
if (destfd < 0)
goto err_keydest;
destfd_size = sbuf.st_size;
}
tfd = mmap_fdt(params, tmpfile, &ptr, &sbuf);
tfd = mmap_fdt(params->cmdname, tmpfile, &ptr, &sbuf, 1);
if (tfd < 0)
goto err_mmap;
......
/*
* (C) Copyright 2014
* DENX Software Engineering
* Heiko Schocher <hs@denx.de>
*
* fit_info: print the offset and the len of a property from
* node in a fit file.
*
* Based on:
* (C) Copyright 2008 Semihalf
*
* (C) Copyright 2000-2004
* DENX Software Engineering
* Wolfgang Denk, wd@denx.de
*
* Updated-by: Prafulla Wadaskar <prafulla@marvell.com>
* FIT image specific code abstracted from mkimage.c
* some functions added to address abstraction
*
* All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "mkimage.h"
#include "fit_common.h"
#include <image.h>
#include <u-boot/crc.h>
void usage(char *cmdname)
{
fprintf(stderr, "Usage: %s -f fit file -n node -p property\n"
" -f ==> set fit file which is used'\n"
" -n ==> set node name'\n"
" -p ==> set property name'\n",
cmdname);
exit(EXIT_FAILURE);
}
int main(int argc, char **argv)
{
int ffd = -1;
struct stat fsbuf;
void *fit_blob;
int len;
int nodeoffset; /* node offset from libfdt */
const void *nodep; /* property node pointer */
char *fdtfile = NULL;
char *nodename = NULL;
char *propertyname = NULL;
char cmdname[50];
int c;
strcpy(cmdname, *argv);
while ((c = getopt(argc, argv, "f:n:p:")) != -1)
switch (c) {
case 'f':
fdtfile = optarg;
break;
case 'n':
nodename = optarg;
break;
case 'p':
propertyname = optarg;
break;
default:
usage(cmdname);
break;
}
ffd = mmap_fdt(cmdname, fdtfile, &fit_blob, &fsbuf, 0);
if (ffd < 0) {
printf("Could not open %s\n", fdtfile);
exit(EXIT_FAILURE);
}
nodeoffset = fdt_path_offset(fit_blob, nodename);
if (nodeoffset < 0) {
printf("%s not found.", nodename);
exit(EXIT_FAILURE);
}
nodep = fdt_getprop(fit_blob, nodeoffset, propertyname, &len);
if (len == 0) {
printf("len == 0 %s\n", propertyname);
exit(EXIT_FAILURE);
}
printf("NAME: %s\n", fit_get_name(fit_blob, nodeoffset, NULL));
printf("LEN: %d\n", len);
printf("OFF: %d\n", (int)(nodep - fit_blob));
(void) munmap((void *)fit_blob, fsbuf.st_size);
close(ffd);
exit(EXIT_SUCCESS);
}
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment