tools, fit: add fit_info host command

add fit_info command to the host tools. This command prints
the name, offset and the len from a property from a node in
a fit file. This info can be used to extract a properties
data with linux tools, for example "dd".
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>

tools/.gitignore

 /bmp_logo
 /envcrc
+/fit_info
 /gen_eth_addr
 /img2srec
 /kwboot

tools/Makefile

@@ -60,6 +60,9 @@ hostprogs-y += mkenvimage$(SFX)
 mkenvimage$(SFX)-objs := crc32.o mkenvimage.o os_support.o
 
 hostprogs-y += dumpimage$(SFX) mkimage$(SFX)
+ifdef CONFIG_FIT_SIGNATURE
+hostprogs-y += fit_info$(SFX)
+endif
 
 FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := image-sig.o
 # Flattened device tree objects
@@ -71,6 +74,8 @@ dumpimage-mkimage-objs := aisimage.o \
 			$(FIT_SIG_OBJS-y) \
 			crc32.o \
 			default_image.o \
+			fdtdec.o \
+			fit_common.o \
 			fit_image.o \
 			image-fit.o \
 			image-host.o \
@@ -91,6 +96,7 @@ dumpimage-mkimage-objs := aisimage.o \
 
 dumpimage$(SFX)-objs := $(dumpimage-mkimage-objs) dumpimage.o
 mkimage$(SFX)-objs   := $(dumpimage-mkimage-objs) mkimage.o
+fit_info$(SFX)-objs   := $(dumpimage-mkimage-objs) fit_info.o
 
 # TODO(sjg@chromium.org): Is this correct on Mac OS?
 
@@ -98,6 +104,7 @@ mkimage$(SFX)-objs   := $(dumpimage-mkimage-objs) mkimage.o
 ifneq ($(CONFIG_MX23)$(CONFIG_MX28),)
 HOSTLOADLIBES_dumpimage$(SFX) := -lssl -lcrypto
 HOSTLOADLIBES_mkimage$(SFX) := -lssl -lcrypto
+HOSTLOADLIBES_fit_info$(SFX) := -lssl -lcrypto
 # Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
 # the mxsimage support within tools/mxsimage.c .
 HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
@@ -106,6 +113,7 @@ endif
 ifdef CONFIG_FIT_SIGNATURE
 HOSTLOADLIBES_dumpimage$(SFX) := -lssl -lcrypto
 HOSTLOADLIBES_mkimage$(SFX) := -lssl -lcrypto
+HOSTLOADLIBES_fit_info$(SFX) := -lssl -lcrypto
 
 # This affects include/image.h, but including the board config file
 # is tricky, so manually define this options here.

tools/fit_common.c

+/*
+ * (C) Copyright 2014
+ * DENX Software Engineering
+ * Heiko Schocher <hs@denx.de>
+ *
+ * (C) Copyright 2008 Semihalf
+ *
+ * (C) Copyright 2000-2004
+ * DENX Software Engineering
+ * Wolfgang Denk, wd@denx.de
+ *
+ * Updated-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *		FIT image specific code abstracted from mkimage.c
+ *		some functions added to address abstraction
+ *
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include "imagetool.h"
+#include "mkimage.h"
+#include "fit_common.h"
+#include <image.h>
+#include <u-boot/crc.h>
+
+int fit_verify_header(unsigned char *ptr, int image_size,
+			struct image_tool_params *params)
+{
+	return fdt_check_header(ptr);
+}
+
+int fit_check_image_types(uint8_t type)
+{
+	if (type == IH_TYPE_FLATDT)
+		return EXIT_SUCCESS;
+	else
+		return EXIT_FAILURE;
+}
+
+int mmap_fdt(char *cmdname, const char *fname, void **blobp,
+		struct stat *sbuf, int useunlink)
+{
+	void *ptr;
+	int fd;
+
+	/* Load FIT blob into memory (we need to write hashes/signatures) */
+	fd = open(fname, O_RDWR | O_BINARY);
+
+	if (fd < 0) {
+		fprintf(stderr, "%s: Can't open %s: %s\n",
+			cmdname, fname, strerror(errno));
+		if (useunlink)
+			unlink(fname);
+		return -1;
+	}
+
+	if (fstat(fd, sbuf) < 0) {
+		fprintf(stderr, "%s: Can't stat %s: %s\n",
+			cmdname, fname, strerror(errno));
+		if (useunlink)
+			unlink(fname);
+		return -1;
+	}
+
+	errno = 0;
+	ptr = mmap(0, sbuf->st_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
+	if ((ptr == MAP_FAILED) || (errno != 0)) {
+		fprintf(stderr, "%s: Can't read %s: %s\n",
+			cmdname, fname, strerror(errno));
+		if (useunlink)
+			unlink(fname);
+		return -1;
+	}
+
+	/* check if ptr has a valid blob */
+	if (fdt_check_header(ptr)) {
+		fprintf(stderr, "%s: Invalid FIT blob\n", cmdname);
+		if (useunlink)
+			unlink(fname);
+		return -1;
+	}
+
+	*blobp = ptr;
+	return fd;
+}

tools/fit_common.h

+/*
+ * (C) Copyright 2014
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _FIT_COMMON_H_
+#define _FIT_COMMON_H_
+
+#include "imagetool.h"
+#include "mkimage.h"
+#include <image.h>
+
+int fit_verify_header(unsigned char *ptr, int image_size,
+			struct image_tool_params *params);
+
+int fit_check_image_types(uint8_t type);
+
+int mmap_fdt(char *cmdname, const char *fname, void **blobp,
+		struct stat *sbuf, int useunlink);
+
+#endif /* _FIT_COMMON_H_ */

tools/fit_image.c

@@ -15,68 +15,13 @@
  */
 
 #include "imagetool.h"
+#include "fit_common.h"
 #include "mkimage.h"
 #include <image.h>
 #include <u-boot/crc.h>
 
 static image_header_t header;
 
-static int fit_verify_header (unsigned char *ptr, int image_size,
-			struct image_tool_params *params)
-{
-	return fdt_check_header(ptr);
-}
-
-static int fit_check_image_types (uint8_t type)
-{
-	if (type == IH_TYPE_FLATDT)
-		return EXIT_SUCCESS;
-	else
-		return EXIT_FAILURE;
-}
-
-int mmap_fdt(struct image_tool_params *params, const char *fname, void **blobp,
-		struct stat *sbuf)
-{
-	void *ptr;
-	int fd;
-
-	/* Load FIT blob into memory (we need to write hashes/signatures) */
-	fd = open(fname, O_RDWR | O_BINARY);
-
-	if (fd < 0) {
-		fprintf(stderr, "%s: Can't open %s: %s\n",
-			params->cmdname, fname, strerror(errno));
-		unlink(fname);
-		return -1;
-	}
-
-	if (fstat(fd, sbuf) < 0) {
-		fprintf(stderr, "%s: Can't stat %s: %s\n",
-			params->cmdname, fname, strerror(errno));
-		unlink(fname);
-		return -1;
-	}
-
-	ptr = mmap(0, sbuf->st_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
-	if (ptr == MAP_FAILED) {
-		fprintf(stderr, "%s: Can't read %s: %s\n",
-			params->cmdname, fname, strerror(errno));
-		unlink(fname);
-		return -1;
-	}
-
-	/* check if ptr has a valid blob */
-	if (fdt_check_header(ptr)) {
-		fprintf(stderr, "%s: Invalid FIT blob\n", params->cmdname);
-		unlink(fname);
-		return -1;
-	}
-
-	*blobp = ptr;
-	return fd;
-}
-
 /**
  * fit_handle_file - main FIT file processing function
  *
@@ -129,13 +74,14 @@ static int fit_handle_file(struct image_tool_params *params)
 	}
 
 	if (params->keydest) {
-		destfd = mmap_fdt(params, params->keydest, &dest_blob, &sbuf);
+		destfd = mmap_fdt(params->cmdname, params->keydest,
+				  &dest_blob, &sbuf, 1);
 		if (destfd < 0)
 			goto err_keydest;
 		destfd_size = sbuf.st_size;
 	}
 
-	tfd = mmap_fdt(params, tmpfile, &ptr, &sbuf);
+	tfd = mmap_fdt(params->cmdname, tmpfile, &ptr, &sbuf, 1);
 	if (tfd < 0)
 		goto err_mmap;
 

tools/fit_info.c

+/*
+ * (C) Copyright 2014
+ * DENX Software Engineering
+ * Heiko Schocher <hs@denx.de>
+ *
+ * fit_info: print the offset and the len of a property from
+ *	     node in a fit file.
+ *
+ * Based on:
+ * (C) Copyright 2008 Semihalf
+ *
+ * (C) Copyright 2000-2004
+ * DENX Software Engineering
+ * Wolfgang Denk, wd@denx.de
+ *
+ * Updated-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *		FIT image specific code abstracted from mkimage.c
+ *		some functions added to address abstraction
+ *
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include "mkimage.h"
+#include "fit_common.h"
+#include <image.h>
+#include <u-boot/crc.h>
+
+void usage(char *cmdname)
+{
+	fprintf(stderr, "Usage: %s -f fit file -n node -p property\n"
+			 "          -f ==> set fit file which is used'\n"
+			 "          -n ==> set node name'\n"
+			 "          -p ==> set property name'\n",
+		cmdname);
+	exit(EXIT_FAILURE);
+}
+
+int main(int argc, char **argv)
+{
+	int ffd = -1;
+	struct stat fsbuf;
+	void *fit_blob;
+	int len;
+	int  nodeoffset;	/* node offset from libfdt */
+	const void *nodep;	/* property node pointer */
+	char *fdtfile = NULL;
+	char *nodename = NULL;
+	char *propertyname = NULL;
+	char cmdname[50];
+	int c;
+
+	strcpy(cmdname, *argv);
+	while ((c = getopt(argc, argv, "f:n:p:")) != -1)
+		switch (c) {
+		case 'f':
+			fdtfile = optarg;
+			break;
+		case 'n':
+			nodename = optarg;
+			break;
+		case 'p':
+			propertyname = optarg;
+			break;
+		default:
+			usage(cmdname);
+			break;
+		}
+
+	ffd = mmap_fdt(cmdname, fdtfile, &fit_blob, &fsbuf, 0);
+
+	if (ffd < 0) {
+		printf("Could not open %s\n", fdtfile);
+		exit(EXIT_FAILURE);
+	}
+
+	nodeoffset = fdt_path_offset(fit_blob, nodename);
+	if (nodeoffset < 0) {
+		printf("%s not found.", nodename);
+		exit(EXIT_FAILURE);
+	}
+	nodep = fdt_getprop(fit_blob, nodeoffset, propertyname, &len);
+	if (len == 0) {
+		printf("len == 0 %s\n", propertyname);
+		exit(EXIT_FAILURE);
+	}
+
+	printf("NAME: %s\n", fit_get_name(fit_blob, nodeoffset, NULL));
+	printf("LEN: %d\n", len);
+	printf("OFF: %d\n", (int)(nodep - fit_blob));
+	(void) munmap((void *)fit_blob, fsbuf.st_size);
+
+	close(ffd);
+	exit(EXIT_SUCCESS);
+}