Commit 6e87ea0c authored by Mike Frysinger's avatar Mike Frysinger
Browse files

Blackfin: add port muxing for BF51x SPI


Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent fc68f9f8
......@@ -3,7 +3,7 @@
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (c) 2005-2007 Analog Devices Inc.
* Copyright (c) 2005-2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
......@@ -163,7 +163,9 @@ static struct manufacturer_info flash_manufacturers[] = {
#define TIMEOUT 5000 /* timeout of 5 seconds */
/* BF54x support */
/* If part has multiple SPI flashes, assume SPI0 as that is
* the one we can boot off of ...
*/
#ifndef pSPI_CTL
# define pSPI_CTL pSPI0_CTL
# define pSPI_BAUD pSPI0_BAUD
......@@ -171,19 +173,16 @@ static struct manufacturer_info flash_manufacturers[] = {
# define pSPI_RDBR pSPI0_RDBR
# define pSPI_STAT pSPI0_STAT
# define pSPI_TDBR pSPI0_TDBR
# define SPI0_SCK 0x0001
# define SPI0_MOSI 0x0004
# define SPI0_MISO 0x0002
# define SPI0_SEL1 0x0010
#endif
/* Default to the SPI SSEL that we boot off of:
* BF54x, BF537, (everything new?): SSEL1
* BF533, BF561: SSEL2
* BF51x, BF533, BF561: SSEL2
*/
#ifndef CONFIG_SPI_FLASH_SSEL
# if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__)
defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \
defined(__ADSPBF51x__)
# define CONFIG_SPI_FLASH_SSEL 2
# else
# define CONFIG_SPI_FLASH_SSEL 1
......@@ -200,12 +199,15 @@ static void SPI_INIT(void)
/* enable SPI pins: SSEL, MOSI, MISO, SCK */
#ifdef __ADSPBF54x__
*pPORTE_FER |= (SPI0_SCK | SPI0_MOSI | SPI0_MISO | SPI0_SEL1);
*pPORTE_FER |= (PE0 | PE1 | PE2 | PE4);
#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
*pPORTF_FER |= (PF10 | PF11 | PF12 | PF13);
#elif defined(__ADSPBF52x__)
bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_3);
bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG1 | PG2 | PG3 | PG4);
#elif defined(__ADSPBF51x__)
bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_7_MASK) | PORT_x_MUX_7_FUNC_1);
bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG12 | PG13 | PG14 | PG15);
#endif
/* initate communication upon write of TDBR */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment