Commit 73a8b27c authored by wdenk's avatar wdenk
Browse files

* Add support for RMU board

* Add support for TQM862L at 100/50 MHz

* Patch by Pantelis Antoniou, 02 Jun 2003:
  major reconstruction of networking code;
  add "ping" support (outgoing only!)
parent 08eaea9c
......@@ -11,6 +11,14 @@ Changes since U-Boot 0.3.1:
- Changed config files of CONFIG_EEPRO100 boards to use the
CFG_RX_ETH_BUFFER define.
* Add support for RMU board
* Add support for TQM862L at 100/50 MHz
* Patch by Pantelis Antoniou, 02 Jun 2003:
major reconstruction of networking code;
add "ping" support (outgoing only!)
* Patch by Denis Peter, 04 June 2003:
add support for the MIP405T board
......
......@@ -63,6 +63,9 @@ Wolfgang Denk <wd@denx.de>
IVMS8_128 MPC860
IVMS8_256 MPC860
LANTEC MPC850
LWMON MPC823
R360MPI MPC823
RMU MPC850
RRvision MPC823
SM850 MPC850
SPD823TS MPC823
......@@ -72,6 +75,7 @@ Wolfgang Denk <wd@denx.de>
TQM855L MPC855
TQM860L MPC860
TQM860L_FEC MPC860
TTTech MPC823
c2mon MPC855
hermes MPC860
lwmon MPC823
......
......@@ -32,11 +32,11 @@ LIST_8xx=" \
IVMS8 IVMS8_128 IVMS8_256 KUP4K \
LANTEC lwmon MBX MBX860T \
MHPC MVS1 NETVIA NX823 \
pcu_e R360MPI RBC823 RPXClassic \
RPXlite RRvision SM850 SPD823TS \
svm_sc8xx SXNI855T TOP860 TQM823L \
TQM823L_LCD TQM850L TQM855L TQM860L \
TTTech v37 \
pcu_e R360MPI RBC823 rmu \
RPXClassic RPXlite RRvision SM850 \
SPD823TS svm_sc8xx SXNI855T TOP860 \
TQM823L TQM823L_LCD TQM850L TQM855L \
TQM860L TTTech v37 \
"
#########################################################################
......
......@@ -323,6 +323,9 @@ RPXClassic_config: unconfig
RPXlite_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx RPXlite
rmu_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx rmu
RRvision_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx RRvision
......@@ -349,10 +352,10 @@ TOP860_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx top860 emk
# Play some tricks for configuration selection
# All boards can come with 50 MHz (default), 66MHz or 80MHz clock,
# All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock,
# but only 855 and 860 boards may come with FEC
# and 823 boards may have LCD support
xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _LCD,,$(subst _config,,$1))))
xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1)))))
FPS850L_config \
FPS860L_config \
......@@ -373,7 +376,8 @@ TQM860L_66MHz_config \
TQM860L_80MHz_config \
TQM862L_config \
TQM862L_66MHz_config \
TQM862L_80MHz_config: unconfig
TQM862L_80MHz_config \
TQM862L_100MHz_config: unconfig
@ >include/config.h
@[ -z "$(findstring _66MHz,$@)" ] || \
{ echo "#define CONFIG_66MHz" >>include/config.h ; \
......@@ -383,6 +387,10 @@ TQM862L_80MHz_config: unconfig
{ echo "#define CONFIG_80MHz" >>include/config.h ; \
echo "... with 80MHz system clock" ; \
}
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CONFIG_100MHz" >>include/config.h ; \
echo "... with 100MHz system clock" ; \
}
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>include/config.h ; \
echo "#define CONFIG_NEC_NL6648BC20" >>include/config.h ; \
......
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $^
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
sinclude .depend
#########################################################################
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# RMU boards
#
TEXT_BASE = 0xfff00000
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8xx.h>
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info);
static int write_word (flash_info_t *info, ulong dest, ulong data);
static void flash_get_offsets (ulong base, flash_info_t *info);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size_b0 ;
int i;
/* Init: no FLASHes known */
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 = flash_get_size((vu_long *)FLASH_BASE_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0<<20);
}
/* Remap FLASH according to real size */
memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
/* Re-do sizing to get full correct info */
size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CFG_MONITOR_BASE,
CFG_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
#ifdef CFG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CFG_ENV_ADDR,
CFG_ENV_ADDR+CFG_ENV_SIZE-1,
&flash_info[0]);
#endif
flash_info[0].size = size_b0;
return (size_b0);
}
/*-----------------------------------------------------------------------
*/
static void flash_get_offsets (ulong base, flash_info_t *info)
{
int i;
/* set up sector start address table */
if (info->flash_id & FLASH_BTYPE) {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00010000;
info->start[2] = base + 0x00018000;
info->start[3] = base + 0x00020000;
for (i = 4; i < info->sector_count; i++) {
info->start[i] = base + ((i-3) * 0x00040000) ;
}
} else {
/* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00010000;
info->start[i--] = base + info->size - 0x00018000;
info->start[i--] = base + info->size - 0x00020000;
for (; i >= 0; i--) {
info->start[i] = base + i * 0x00040000;
}
}
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
break;
case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
break;
case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
break;
case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
break;
case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
break;
case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
break;
case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
break;
case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
break;
default: printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " "
);
}
printf ("\n");
return;
}
/*-----------------------------------------------------------------------
*/
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info)
{
short i;
ulong value;
ulong base = (ulong)addr;
/* Write auto select command: read Manufacturer ID */
addr[0xAAA] = 0xAAAAAAAA ;
addr[0x555] = 0x55555555 ;
addr[0xAAA] = 0x90909090 ;
value = addr[0] ;
switch (value & 0x00FF00FF) {
case AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
case FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* no or unknown flash */
}
value = addr[2] ; /* device ID */
switch (value & 0x00FF00FF) {
case (AMD_ID_LV400T & 0x00FF00FF):
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
info->size = 0x00100000;
break; /* => 1 MB */
case (AMD_ID_LV400B & 0x00FF00FF):
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
info->size = 0x00100000;
break; /* => 1 MB */
case (AMD_ID_LV800T & 0x00FF00FF):
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
info->size = 0x00200000;
break; /* => 2 MB */
case (AMD_ID_LV800B & 0x00FF00FF):
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
info->size = 0x00400000; /*%%% Size doubled by yooth */
break; /* => 4 MB */
case (AMD_ID_LV160T & 0x00FF00FF):
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
info->size = 0x00400000;
break; /* => 4 MB */
case (AMD_ID_LV160B & 0x00FF00FF):
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00800000;
break; /* => 8 MB */
#if 0 /* enable when device IDs are available */
case AMD_ID_LV320T:
info->flash_id += FLASH_AM320T;
info->sector_count = 67;
info->size = 0x00800000;
break; /* => 8 MB */
case AMD_ID_LV320B:
info->flash_id += FLASH_AM320B;
info->sector_count = 67;
info->size = 0x01000000;
break; /* => 16 MB */
#endif
default:
info->flash_id = FLASH_UNKNOWN;
return (0); /* => no or unknown flash */
}
/*%%% sector start address modified */
/* set up sector start address table */
if (info->flash_id & FLASH_BTYPE) {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00010000;
info->start[2] = base + 0x00018000;
info->start[3] = base + 0x00020000;
for (i = 4; i < info->sector_count; i++) {
info->start[i] = base + ((i-3) * 0x00040000) ;
}
} else {
/* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00010000;
info->start[i--] = base + info->size - 0x00018000;
info->start[i--] = base + info->size - 0x00020000;
for (; i >= 0; i--) {
info->start[i] = base + i * 0x00040000;
}
}
/* check for protected sectors */
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
addr = (volatile unsigned long *)(info->start[i]);
info->protect[i] = addr[4] & 1 ;
}
/*
* Prevent writes to uninitialized FLASH.
*/
if (info->flash_id != FLASH_UNKNOWN) {
addr = (volatile unsigned long *)info->start[0];
*addr = 0xF0F0F0F0; /* reset bank */
}
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
vu_long *addr = (vu_long*)(info->start[0]);
int flag, prot, sect, l_sect;
ulong start, now, last;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
if ((info->flash_id == FLASH_UNKNOWN) ||
(info->flash_id > FLASH_AMD_COMP)) {
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
l_sect = -1;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr[0xAAA] = 0xAAAAAAAA;
addr[0x555] = 0x55555555;
addr[0xAAA] = 0x80808080;
addr[0xAAA] = 0xAAAAAAAA;
addr[0x555] = 0x55555555;
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr = (vu_long *)(info->start[sect]) ;
addr[0] = 0x30303030 ;
l_sect = sect;
}
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
/*
* We wait for the last triggered sector
*/
if (l_sect < 0)
goto DONE;
start = get_timer (0);
last = start;
addr = (vu_long *)(info->start[l_sect]);
while ((addr[0] & 0x80808080) != 0x80808080) {
if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
DONE:
/* reset to read mode */
addr = (vu_long *)info->start[0];
addr[0] = 0xF0F0F0F0; /* reset bank */
printf (" done\n");
return 0;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int i, l, rc;
wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
for (; i<4 && cnt>0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt==0 && i<4; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
data = 0;
for (i=0; i<4; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
cnt -= 4;
}
if (cnt == 0) {
return (0);
}
/*