Commit 8467faef authored by Eric Nelson's avatar Eric Nelson Committed by Stefano Babic
Browse files

i.MX6: Set and clear the gating bits for Phase Fractional Dividers

This addresses silicon errata ERR006282 as described in this
document:
	https://community.freescale.com/docs/DOC-94581

Also implemented in Freescale's 2009.08-based release:

	http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/


	Commit id: b7c5badf94ffbe6cd0845efbb75e16e05e3af404
Signed-off-by: default avatarEric Nelson <eric.nelson@boundarydevices.com>
Acked-by: default avatarStefano Babic <sbabic@denx.de>
parent 67d54c39
......@@ -213,6 +213,34 @@ const struct boot_mode soc_boot_modes[] = {
void s_init(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
int is_6q = is_cpu_type(MXC_CPU_MX6Q);
u32 mask480;
u32 mask528;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
* to make sure PFD is working right, otherwise, PFDs may
* not output clock after reset, MX6DL and MX6SL have added 396M pfd
* workaround in ROM code, as bus clock need it
*/
mask480 = ANATOP_PFD_CLKGATE_MASK(0) |
ANATOP_PFD_CLKGATE_MASK(1) |
ANATOP_PFD_CLKGATE_MASK(2) |
ANATOP_PFD_CLKGATE_MASK(3);
mask528 = ANATOP_PFD_CLKGATE_MASK(0) |
ANATOP_PFD_CLKGATE_MASK(1) |
ANATOP_PFD_CLKGATE_MASK(3);
/*
* Don't reset PFD2 on DL/S
*/
if (is_6q)
mask528 |= ANATOP_PFD_CLKGATE_MASK(2);
writel(mask480, &anatop->pfd_480_set);
writel(mask528, &anatop->pfd_528_set);
writel(mask480, &anatop->pfd_480_clr);
writel(mask528, &anatop->pfd_528_clr);
}
#ifdef CONFIG_IMX_HDMI
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment