Commit 877eb0f9 authored by Liu Hui-R64343's avatar Liu Hui-R64343 Committed by Albert Aribaud
Browse files

MX51EVK: UART does not print out the early information



The early bootup information is not print out due to
the UART pin iomux not set up correctly before board_init

Add the board_early_init_f function and enable the
CONFIG_BOARD_EARLY_INIT_F. Move the UART pin setting
from board_init to board_early_init_f function.

This patch also move the FEC pin iomux setup to the
board_early_init_f.
Signed-off-by: default avatarJason Liu <r64343@freescale.com>
parent 6f918bd4
......@@ -399,6 +399,14 @@ int board_mmc_init(bd_t *bis)
}
#endif
int board_early_init_f(void)
{
setup_iomux_uart();
setup_iomux_fec();
return 0;
}
int board_init(void)
{
system_rev = get_cpu_rev();
......@@ -407,9 +415,6 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
setup_iomux_uart();
setup_iomux_fec();
return 0;
}
......
......@@ -203,6 +203,8 @@
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment