Commit 888b4f43 authored by Shawn Guo's avatar Shawn Guo Committed by Stefano Babic
Browse files

mx51evk: Fix 2 hours reset issue



The mx51evk u-boot has an issue that system will get reset
every 2 hours.

MC13892 has an inside charge timer which expires in 120 minutes.
If ICHRG and CHGAUTOB are not set properly, this timer expiration
will get system power recycled.

Since mx51evk has no Li-Ion battery on board, the patch sets
ICHRG in externally powered mode and sets CHGAUTOB bit to avoid
automatic charging, so that system will not get reset by this
timer expiration.

The patch also corrects the bit field definition of register 48
(Charger 0) per latest MC13892 Reference Manual.
Signed-off-by: default avatarShawn Guo <shawn.gsc@gmail.com>
parent 9a004418
......@@ -188,10 +188,10 @@ static void power_init(void)
val &= ~PWGT2SPIEN;
pmic_reg_write(REG_POWER_MISC, val);
/* Write needed to update Charger 0 */
pmic_reg_write(REG_CHARGE, VCHRG0 | VCHRG1 | VCHRG2 |
ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | ICHRGTR0 |
OVCTRL1 | UCHEN | CHRGLEDEN | CYCLB);
/* Externally powered */
val = pmic_reg_read(REG_CHARGE);
val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
pmic_reg_write(REG_CHARGE, val);
/* power up the system first */
pmic_reg_write(REG_POWER_MISC, PWUP);
......
......@@ -29,24 +29,24 @@
/* REG_CHARGE */
#define VCHRG0 0
#define VCHRG0 (1 << 0)
#define VCHRG1 (1 << 1)
#define VCHRG2 (1 << 2)
#define ICHRG0 (1 << 3)
#define ICHRG1 (1 << 4)
#define ICHRG2 (1 << 5)
#define ICHRG3 (1 << 6)
#define ICHRGTR0 (1 << 7)
#define ICHRGTR1 (1 << 8)
#define ICHRGTR2 (1 << 9)
#define TREN (1 << 7)
#define ACKLPB (1 << 8)
#define THCHKB (1 << 9)
#define FETOVRD (1 << 10)
#define FETCTRL (1 << 11)
#define RVRSMODE (1 << 13)
#define OVCTRL0 (1 << 15)
#define OVCTRL1 (1 << 16)
#define UCHEN (1 << 17)
#define PLIM0 (1 << 15)
#define PLIM1 (1 << 16)
#define PLIMDIS (1 << 17)
#define CHRGLEDEN (1 << 18)
#define CHRGRAWPDEN (1 << 19)
#define CHGTMRRST (1 << 19)
#define CHGRESTART (1 << 20)
#define CHGAUTOB (1 << 21)
#define CYCLB (1 << 22)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment