Commit 8baa3818 authored by Andre Przywara's avatar Andre Przywara Committed by Jagan Teki
Browse files

SPL: FIT: factor out spl_load_fit_image()

At the moment we load two images from a FIT image: the actual U-Boot
image and the .dtb file. Both times we have very similar code, that deals
with alignment requirements the media we load from imposes upon us.
Factor out this code into a new function, which we just call twice.
Signed-off-by: default avatarAndre Przywara <>
Reviewed-by: default avatarSimon Glass <>
Tested-by: default avatarHeiko Stuebner <>
Reviewed-by: default avatarKever Yang <>
Tested-by: default avatarKever Yang <>
Tested-by: default avatarJagan Teki <>
parent 5c8c8fac
......@@ -159,19 +159,81 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size,
return (data_size + info->bl_len - 1) / info->bl_len;
* spl_load_fit_image(): load the image described in a certain FIT node
* @info: points to information about the device to load data from
* @sector: the start sector of the FIT image on the device
* @fit: points to the flattened device tree blob describing the FIT
* image
* @base_offset: the beginning of the data area containing the actual
* image data, relative to the beginning of the FIT
* @node: offset of the DT node describing the image to load (relative
* to @fit)
* @image_info: will be filled with information about the loaded image
* If the FIT node does not contain a "load" (address) property,
* the image gets loaded to the address pointed to by the
* load_addr member in this struct.
* Return: 0 on success or a negative error number.
static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
void *fit, ulong base_offset, int node,
struct spl_image_info *image_info)
ulong offset;
size_t length;
ulong load_addr, load_ptr;
void *src;
ulong overhead;
int nr_sectors;
int align_len = ARCH_DMA_MINALIGN - 1;
offset = fdt_getprop_u32(fit, node, "data-offset");
if (offset == FDT_ERROR)
return -ENOENT;
offset += base_offset;
length = fdt_getprop_u32(fit, node, "data-size");
if (length == FDT_ERROR)
return -ENOENT;
load_addr = fdt_getprop_u32(fit, node, "load");
if (load_addr == FDT_ERROR && image_info)
load_addr = image_info->load_addr;
load_ptr = (load_addr + align_len) & ~align_len;
overhead = get_aligned_image_overhead(info, offset);
nr_sectors = get_aligned_image_size(info, length, offset);
if (info->read(info, sector + get_aligned_image_offset(info, offset),
nr_sectors, (void*)load_ptr) != nr_sectors)
return -EIO;
debug("image: dst=%lx, offset=%lx, size=%lx\n", load_ptr, offset,
(unsigned long)length);
src = (void *)load_ptr + overhead;
board_fit_image_post_process(&src, &length);
memcpy((void*)load_addr, src, length);
if (image_info) {
image_info->load_addr = load_addr;
image_info->size = length;
image_info->entry_point = fdt_getprop_u32(fit, node, "entry");
return 0;
int spl_load_simple_fit(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector, void *fit)
int sectors;
ulong size, load;
ulong size;
unsigned long count;
int node, images;
void *load_ptr;
int fdt_offset, fdt_len;
int data_offset, data_size;
struct spl_image_info image_info;
int node, images, ret;
int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
int src_sector;
void *dst, *src;
* Figure out where the external images start. This is the base for the
......@@ -223,46 +285,13 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
return -1;
/* Get its information and set up the spl_image structure */
data_offset = fdt_getprop_u32(fit, node, "data-offset");
if (data_offset == FDT_ERROR)
return -ENOENT;
data_size = fdt_getprop_u32(fit, node, "data-size");
if (data_size == FDT_ERROR)
return -ENOENT;
load = fdt_getprop_u32(fit, node, "load");
debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
spl_image->load_addr = load;
spl_image->entry_point = load;
spl_image->os = IH_OS_U_BOOT;
* Work out where to place the image. We read it so that the first
* byte will be at 'load'. This may mean we need to load it starting
* before then, since we can only read whole blocks.
data_offset += base_offset;
sectors = get_aligned_image_size(info, data_size, data_offset);
load_ptr = (void *)load;
debug("U-Boot size %x, data %p\n", data_size, load_ptr);
dst = load_ptr;
/* Read the image */
src_sector = sector + get_aligned_image_offset(info, data_offset);
debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n",
dst, src_sector, sectors);
count = info->read(info, src_sector, sectors, dst);
if (count != sectors)
return -EIO;
debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset,
src = dst + get_aligned_image_overhead(info, data_offset);
/* Load the image and set up the spl_image structure */
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
if (ret)
return ret;
board_fit_image_post_process((void **)&src, (size_t *)&data_size);
memcpy(dst, src, data_size);
spl_image->os = IH_OS_U_BOOT;
/* Figure out which device tree the board wants to use */
node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
......@@ -270,43 +299,12 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
debug("%s: cannot find FDT node\n", __func__);
return node;
fdt_offset = fdt_getprop_u32(fit, node, "data-offset");
fdt_len = fdt_getprop_u32(fit, node, "data-size");
if (fdt_offset == FDT_ERROR || fdt_len == FDT_ERROR) {
debug("%s: cannot load FDT data\n" __func__);
return -ENOENT;
* Read the device tree and place it after the image. There may be
* some extra data before it since we can only read entire blocks.
* And also align the destination address to ARCH_DMA_MINALIGN.
* Read the device tree and place it after the image.
* Align the destination address to ARCH_DMA_MINALIGN.
dst = (void *)((load + data_size + align_len) & ~align_len);
fdt_offset += base_offset;
sectors = get_aligned_image_size(info, fdt_len, fdt_offset);
src_sector = sector + get_aligned_image_offset(info, fdt_offset);
count = info->read(info, src_sector, sectors, dst);
debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n",
dst, src_sector, sectors);
if (count != sectors)
return -EIO;
* Copy the device tree so that it starts immediately after the image.
* After this we will have the U-Boot image and its device tree ready
* for us to start.
debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset,
src = dst + get_aligned_image_overhead(info, fdt_offset);
dst = load_ptr + data_size;
board_fit_image_post_process((void **)&src, (size_t *)&fdt_len);
memcpy(dst, src, fdt_len);
return 0;
image_info.load_addr = spl_image->load_addr + spl_image->size;
return spl_load_fit_image(info, sector, fit, base_offset, node,
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment