Commit 9000652d authored by Allen Martin's avatar Allen Martin Committed by Tom Warren
Browse files

tegra: remove support for UART SPI switch



This feature was only used for tegra20 seaboard that had a pinmux
conflict on the SPI pins.  These boards were never manufactured, so
remove this support to clean up SPI driver.
Signed-off-by: default avatarAllen Martin <amartin@nvidia.com>
Signed-off-by: default avatarTom Warren <twarren@nvidia.com>
Reviewed-by: default avatarStephen Warren <swarren@nvidia.com>
parent b6379e15
......@@ -25,8 +25,7 @@
#define _TEGRA_BOARD_H_
/* Set up pinmux to make UART usable */
void gpio_config_uart(void); /* CONFIG_SPI_UART_SWITCH */
void gpio_early_init_uart(void); /*!CONFIG_SPI_UART_SWITCH */
void gpio_early_init_uart(void);
/* Set up early UART output */
void board_init_uart_f(void);
......
/*
* Copyright (c) 2011 The Chromium OS Authors.
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _UART_SPI_SWITCH_H
#define _UART_SPI_SWITCH_H
#if defined(CONFIG_SPI_UART_SWITCH)
/*
* Signal that we are about to use the UART. This unfortunate hack is
* required by Seaboard, which cannot use its console and SPI at the same
* time! If the board file provides this, the board config will declare it.
* Let this be a lesson for others.
*/
void pinmux_select_uart(void);
/*
* Signal that we are about the use the SPI bus.
*/
void pinmux_select_spi(void);
#else /* not CONFIG_SPI_UART_SWITCH */
static inline void pinmux_select_uart(void) {}
static inline void pinmux_select_spi(void) {}
#endif
#endif
......@@ -132,9 +132,6 @@ int board_init(void)
clock_init();
clock_verify();
#ifdef CONFIG_SPI_UART_SWITCH
gpio_config_uart();
#endif
#if defined(CONFIG_TEGRA_SPI) || defined(CONFIG_TEGRA_SLINK)
pin_mux_spi();
spi_init();
......
# common options for all tegra boards
COBJS-y += ../../nvidia/common/board.o
COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o
COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o
/*
* Copyright (c) 2011 The Chromium OS Authors.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/uart-spi-switch.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/tegra_spi.h>
#include <asm/arch-tegra/board.h>
/* position of the UART/SPI select switch */
enum spi_uart_switch {
SWITCH_UNKNOWN,
SWITCH_SPI,
SWITCH_UART,
SWITCH_BOTH
};
/* Information about the spi/uart switch */
struct spi_uart {
int gpio; /* GPIO to control switch */
u32 port; /* Port number of UART affected */
};
static struct spi_uart local;
static enum spi_uart_switch switch_pos; /* Current switch position */
static void get_config(struct spi_uart *config)
{
#if defined CONFIG_SPI_CORRUPTS_UART
config->gpio = CONFIG_UART_DISABLE_GPIO;
config->port = CONFIG_SPI_CORRUPTS_UART_NR;
#else
config->gpio = -1;
#endif
}
/*
* Init the UART / SPI switch. This can be called before relocation so we must
* not access BSS.
*/
void gpio_early_init_uart(void)
{
struct spi_uart config;
get_config(&config);
if (config.gpio != -1) {
/* Cannot provide a label prior to relocation */
gpio_request(config.gpio, NULL);
gpio_direction_output(config.gpio, 0);
}
}
/*
* Configure the UART / SPI switch.
*/
void gpio_config_uart(void)
{
get_config(&local);
if (local.gpio != -1) {
gpio_direction_output(local.gpio, 0);
switch_pos = SWITCH_UART;
} else {
/*
* If we're here we don't have a SPI switch; go ahead and
* enable the SPI now. We didn't in spi_init() so we wouldn't
* kill the UART.
*/
pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
switch_pos = SWITCH_BOTH;
}
}
static void spi_uart_switch(struct spi_uart *config,
enum spi_uart_switch new_pos)
{
if (switch_pos == SWITCH_BOTH || new_pos == switch_pos)
return;
/* pre-delay, allow SPI/UART to settle, FIFO to empty, etc. */
udelay(CONFIG_SPI_CORRUPTS_UART_DLY);
/* We need to dynamically change the pinmux, shared w/UART RXD/CTS */
pinmux_set_func(PINGRP_GMC, new_pos == SWITCH_SPI ?
PMUX_FUNC_SFLASH : PMUX_FUNC_UARTD);
/*
* On Seaboard, MOSI/MISO are shared w/UART.
* Use GPIO I3 (UART_DISABLE) to tristate UART during SPI activity.
* Enable UART later (cs_deactivate) so we can use it for U-Boot comms.
*/
gpio_direction_output(config->gpio, new_pos == SWITCH_SPI);
switch_pos = new_pos;
}
void pinmux_select_uart(void)
{
spi_uart_switch(&local, SWITCH_UART);
}
void pinmux_select_spi(void)
{
spi_uart_switch(&local, SWITCH_SPI);
}
......@@ -31,7 +31,7 @@
#include <asm/gpio.h>
/* TODO: Remove this code when the SPI switch is working */
#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
#if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
void gpio_early_init_uart(void)
{
/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
......
......@@ -28,7 +28,6 @@
#include <asm/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/uart-spi-switch.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/tegra_spi.h>
#include <spi.h>
......@@ -36,12 +35,6 @@
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_SPI_CORRUPTS_UART)
#define corrupt_delay() udelay(CONFIG_SPI_CORRUPTS_UART_DLY);
#else
#define corrupt_delay()
#endif
struct tegra_spi_slave {
struct spi_slave slave;
struct spi_tegra *regs;
......@@ -175,16 +168,8 @@ int spi_claim_bus(struct spi_slave *slave)
*/
pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
pinmux_tristate_disable(PINGRP_LSPI);
pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
#ifndef CONFIG_SPI_UART_SWITCH
/*
* NOTE:
* Only set PinMux bits 3:2 to SPI here on boards that don't have the
* SPI UART switch or subsequent UART data won't go out! See
* spi_uart_switch().
*/
/* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */
#endif
return 0;
}
......@@ -202,24 +187,16 @@ void spi_cs_activate(struct spi_slave *slave)
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
pinmux_select_spi();
/* CS is negated on Tegra, so drive a 1 to get a 0 */
setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
corrupt_delay(); /* Let UART settle */
}
void spi_cs_deactivate(struct spi_slave *slave)
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
pinmux_select_uart();
/* CS is negated on Tegra, so drive a 0 to get a 1 */
clrbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
corrupt_delay(); /* Let SPI settle */
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment