usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB

USB-related options are usually prefixed with CONFIG_USB and platform-specific
adaptation for the MUSB controller already have a CONFIG_USB_MUSB prefix, so
this switches all MUSB-related options to a CONFIG_USB_MUSB prefix, for
consistency.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

arch/arm/cpu/armv7/am33xx/board.c

@@ -124,7 +124,7 @@ int cpu_mmc_init(bd_t *bis)
 #endif
 
 /* AM33XX has two MUSB controllers which can be host or gadget */
-#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+#if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
 	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 

arch/arm/include/asm/arch-sunxi/usb_phy.h

@@ -21,7 +21,7 @@ int sunxi_usb_phy_id_detect(int index);
 void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
 
 /* Not really phy related, but we have to declare this somewhere ... */
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+#if defined(CONFIG_USB_MUSB_HOST) || defined(CONFIG_USB_MUSB_GADGET)
 void sunxi_musb_board_init(void);
 #else
 #define sunxi_musb_board_init()

board/birdland/bav335x/board.c

@@ -363,7 +363,7 @@ static struct cpsw_platform_data cpsw_data = {
 #if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) &&\
 		defined(CONFIG_SPL_BUILD)) || \
 	((defined(CONFIG_DRIVER_TI_CPSW) || \
-	  defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
+	  defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \
 	 !defined(CONFIG_SPL_BUILD))
 int board_eth_init(bd_t *bis)
 {

board/compulab/cm_t3517/cm_t3517.c

@@ -50,12 +50,12 @@ static struct omap_musb_board_data cm_t3517_musb_board_data = {
 };
 
 static struct musb_hdrc_platform_data cm_t3517_musb_pdata = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
 	.mode           = MUSB_HOST,
-#elif defined(CONFIG_MUSB_GADGET)
+#elif defined(CONFIG_USB_MUSB_GADGET)
 	.mode		= MUSB_PERIPHERAL,
 #else
-#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
 #endif
 	.config         = &cm_t3517_musb_config,
 	.power          = 250,

board/logicpd/am3517evm/am3517evm.c

@@ -65,12 +65,12 @@ static struct omap_musb_board_data musb_board_data = {
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
 	.mode           = MUSB_HOST,
-#elif defined(CONFIG_MUSB_GADGET)
+#elif defined(CONFIG_USB_MUSB_GADGET)
 	.mode		= MUSB_PERIPHERAL,
 #else
-#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
 #endif
 	.config         = &musb_config,
 	.power          = 250,
@@ -159,7 +159,7 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
 int board_eth_init(bd_t *bis)
 {
 	int rv, n = 0;

board/phytec/pcm051/board.c

@@ -208,7 +208,7 @@ static struct cpsw_platform_data cpsw_data = {
 #endif
 
 #if defined(CONFIG_DRIVER_TI_CPSW) || \
-	(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
+	(defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
 int board_eth_init(bd_t *bis)
 {
 	int rv, n = 0;

board/siemens/draco/board.c

@@ -267,7 +267,7 @@ static struct cpsw_platform_data cpsw_data = {
 };
 
 #if defined(CONFIG_DRIVER_TI_CPSW) || \
-	(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
+	(defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
 int board_eth_init(bd_t *bis)
 {
 	struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;

board/siemens/pxm2/board.c

@@ -213,7 +213,7 @@ static struct cpsw_platform_data cpsw_data = {
 #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
 
 #if defined(CONFIG_DRIVER_TI_CPSW) || \
-	(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
+	(defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
 int board_eth_init(bd_t *bis)
 {
 	int n = 0;

board/siemens/rut/board.c

@@ -174,7 +174,7 @@ static struct cpsw_platform_data cpsw_data = {
 };
 
 #if defined(CONFIG_DRIVER_TI_CPSW) || \
-	(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
+	(defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
 int board_eth_init(bd_t *bis)
 {
 	struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;

board/ti/am335x/board.c

@@ -569,7 +569,7 @@ static struct cpsw_platform_data cpsw_data = {
 #if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \
 		&& defined(CONFIG_SPL_BUILD)) || \
 	((defined(CONFIG_DRIVER_TI_CPSW) || \
-	  defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
+	  defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \
 	 !defined(CONFIG_SPL_BUILD))
 int board_eth_init(bd_t *bis)
 {

board/ti/beagle/beagle.c

@@ -306,12 +306,12 @@ static struct omap_musb_board_data musb_board_data = {
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
 	.mode           = MUSB_HOST,
-#elif defined(CONFIG_MUSB_GADGET)
+#elif defined(CONFIG_USB_MUSB_GADGET)
 	.mode		= MUSB_PERIPHERAL,
 #else
-#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
 #endif
 	.config         = &musb_config,
 	.power          = 100,
@@ -568,7 +568,7 @@ int ehci_hcd_stop(int index)
 
 #endif /* CONFIG_USB_EHCI */
 
-#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
 int board_eth_init(bd_t *bis)
 {
 	return usb_eth_initialize(bis);

board/vscom/baltos/board.c

@@ -407,7 +407,7 @@ static struct cpsw_platform_data cpsw_data = {
 #if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \
 		&& defined(CONFIG_SPL_BUILD)) || \
 	((defined(CONFIG_DRIVER_TI_CPSW) || \
-	  defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
+	  defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \
 	 !defined(CONFIG_SPL_BUILD))
 int board_eth_init(bd_t *bis)
 {

drivers/usb/gadget/gadget_chips.h

@@ -125,7 +125,7 @@
 #endif
 
 /* Mentor high speed "dual role" controller, in peripheral role */
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
 #define gadget_is_musbhdrc(g)	(!strcmp("musb-hdrc", (g)->name))
 #else
 #define gadget_is_musbhdrc(g)	0

drivers/usb/musb-new/Makefile

@@ -2,9 +2,9 @@
 # for USB OTG silicon based on Mentor Graphics INVENTRA designs
 #
 
-obj-$(CONFIG_MUSB_GADGET) += musb_gadget.o musb_gadget_ep0.o musb_core.o
-obj-$(CONFIG_MUSB_GADGET) += musb_uboot.o
-obj-$(CONFIG_MUSB_HOST) += musb_host.o musb_core.o musb_uboot.o
+obj-$(CONFIG_USB_MUSB_GADGET) += musb_gadget.o musb_gadget_ep0.o musb_core.o
+obj-$(CONFIG_USB_MUSB_GADGET) += musb_uboot.o
+obj-$(CONFIG_USB_MUSB_HOST) += musb_host.o musb_core.o musb_uboot.o
 obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o
 obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o
 obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o

drivers/usb/musb-new/musb_core.c

@@ -1437,7 +1437,7 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
 		strcat(aInfo, ", dyn FIFOs");
 		musb->dyn_fifo = true;
 	}
-#ifndef CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#ifndef CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 	if (reg & MUSB_CONFIGDATA_MPRXE) {
 		strcat(aInfo, ", bulk combine");
 		musb->bulk_combine = true;
@@ -1662,7 +1662,7 @@ irqreturn_t musb_interrupt(struct musb *musb)
 }
 EXPORT_SYMBOL_GPL(musb_interrupt);
 
-#ifndef CONFIG_MUSB_PIO_ONLY
+#ifndef CONFIG_USB_MUSB_PIO_ONLY
 static bool __devinitdata use_dma = 1;
 
 /* "modprobe ... use_dma=0" etc */
@@ -2011,7 +2011,7 @@ musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev,
 
 	pm_runtime_get_sync(musb->controller);
 
-#ifndef CONFIG_MUSB_PIO_ONLY
+#ifndef CONFIG_USB_MUSB_PIO_ONLY
 	if (use_dma && dev->dma_mask) {
 		struct dma_controller	*c;
 
@@ -2194,7 +2194,7 @@ fail0:
  * bridge to a platform device; this driver then suffices.
  */
 
-#ifndef CONFIG_MUSB_PIO_ONLY
+#ifndef CONFIG_USB_MUSB_PIO_ONLY
 static u64	*orig_dma_mask;
 #endif
 
@@ -2217,7 +2217,7 @@ static int __devinit musb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-#ifndef CONFIG_MUSB_PIO_ONLY
+#ifndef CONFIG_USB_MUSB_PIO_ONLY
 	/* clobbered by use_dma=n */
 	orig_dma_mask = dev->dma_mask;
 #endif
@@ -2244,7 +2244,7 @@ static int __devexit musb_remove(struct platform_device *pdev)
 	musb_free(musb);
 	iounmap(ctrl_base);
 	device_init_wakeup(&pdev->dev, 0);
-#ifndef CONFIG_MUSB_PIO_ONLY
+#ifndef CONFIG_USB_MUSB_PIO_ONLY
 	pdev->dev.dma_mask = orig_dma_mask;
 #endif
 	return 0;

drivers/usb/musb-new/musb_core.h

@@ -97,7 +97,7 @@ struct musb_ep;
 #ifndef __UBOOT__
 #define	is_peripheral_capable()	(1)
 #else
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
 #define	is_peripheral_capable()	(1)
 #else
 #define	is_peripheral_capable()	(0)
@@ -118,7 +118,7 @@ extern void musb_g_disconnect(struct musb *);
 #ifndef __UBOOT__
 #define	is_host_capable()	(1)
 #else
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
 #define	is_host_capable()	(1)
 #else
 #define	is_host_capable()	(0)

drivers/usb/musb-new/musb_dma.h

@@ -62,7 +62,7 @@ struct musb_hw_ep;
 
 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
 
-#ifndef CONFIG_MUSB_PIO_ONLY
+#ifndef CONFIG_USB_MUSB_PIO_ONLY
 #define	is_dma_capable()	(1)
 #else
 #define	is_dma_capable()	(0)

drivers/usb/musb-new/musb_gadget.c

@@ -99,7 +99,7 @@
 #define is_buffer_mapped(req) (is_dma_capable() && \
 					(req->map_state != UN_MAPPED))
 
-#ifndef CONFIG_MUSB_PIO_ONLY
+#ifndef CONFIG_USB_MUSB_PIO_ONLY
 /* Maps the buffer to dma  */
 
 static inline void map_dma_buffer(struct musb_request *request,
@@ -382,7 +382,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 			epnum, musb_ep->packet_sz, fifo_count,
 			csr);
 
-#ifndef	CONFIG_MUSB_PIO_ONLY
+#ifndef	CONFIG_USB_MUSB_PIO_ONLY
 	if (is_buffer_mapped(req)) {
 		struct dma_controller	*c = musb->dma_controller;
 		size_t request_size;

drivers/usb/musb-new/musb_uboot.c

@@ -15,7 +15,7 @@
 #include "musb_gadget.h"
 #include "musb_uboot.h"
 
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
 struct int_queue {
 	struct usb_host_endpoint hep;
 	struct urb urb;
@@ -368,9 +368,9 @@ struct dm_usb_ops musb_usb_ops = {
 	.reset_root_port = musb_reset_root_port,
 };
 #endif /* CONFIG_DM_USB */
-#endif /* CONFIG_MUSB_HOST */
+#endif /* CONFIG_USB_MUSB_HOST */
 
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
 static struct musb *gadget;
 
 int usb_gadget_handle_interrupts(int index)
@@ -420,7 +420,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 		driver->unbind(&gadget->g);
 	return 0;
 }
-#endif /* CONFIG_MUSB_GADGET */
+#endif /* CONFIG_USB_MUSB_GADGET */
 
 int musb_register(struct musb_hdrc_platform_data *plat, void *bdata,
 			void *ctl_regs)
@@ -428,12 +428,12 @@ int musb_register(struct musb_hdrc_platform_data *plat, void *bdata,
 	struct musb **musbp;
 
 	switch (plat->mode) {
-#if defined(CONFIG_MUSB_HOST) && !defined(CONFIG_DM_USB)
+#if defined(CONFIG_USB_MUSB_HOST) && !defined(CONFIG_DM_USB)
 	case MUSB_HOST:
 		musbp = &musb_host.host;
 		break;
 #endif
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
 	case MUSB_PERIPHERAL:
 		musbp = &gadget;
 		break;

drivers/usb/musb-new/sunxi.c

@@ -286,7 +286,7 @@ static struct musb_hdrc_config musb_config = {
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
 	.mode           = MUSB_HOST,
 #else
 	.mode		= MUSB_PERIPHERAL,
@@ -296,7 +296,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 	.platform_ops	= &sunxi_musb_ops,
 };
 
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
 int musb_usb_probe(struct udevice *dev)
 {
 	struct musb_host_data *host = dev_get_priv(dev);
@@ -341,7 +341,7 @@ U_BOOT_DRIVER(usb_musb) = {
 
 void sunxi_musb_board_init(void)
 {
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
 	struct udevice *dev;
 
 	/*

drivers/usb/musb/Makefile

@@ -5,8 +5,8 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_MUSB_HCD) += musb_hcd.o musb_core.o
-obj-$(CONFIG_MUSB_UDC) += musb_udc.o musb_core.o
+obj-$(CONFIG_USB_MUSB_HCD) += musb_hcd.o musb_core.o
+obj-$(CONFIG_USB_MUSB_UDC) += musb_udc.o musb_core.o
 obj-$(CONFIG_USB_BLACKFIN) += blackfin_usb.o
 obj-$(CONFIG_USB_DAVINCI) += davinci.o
 obj-$(CONFIG_USB_OMAP3) += omap3.o

drivers/usb/musb/musb_core.c

@@ -19,7 +19,7 @@ struct musb_regs *musbr;
  */
 void musb_start(void)
 {
-#if defined(CONFIG_MUSB_HCD)
+#if defined(CONFIG_USB_MUSB_HCD)
 	u8 devctl;
 	u8 busctl;
 #endif
@@ -32,7 +32,7 @@ void musb_start(void)
 
 	/* put into basic highspeed mode and start session */
 	writeb(MUSB_POWER_HSENAB, &musbr->power);
-#if defined(CONFIG_MUSB_HCD)
+#if defined(CONFIG_USB_MUSB_HCD)
 	/* Program PHY to use EXT VBUS if required */
 	if (musb_cfg.extvbus == 1) {
 		busctl = musb_read_ulpi_buscontrol(musbr);
@@ -81,7 +81,7 @@ void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt)
 			config_fifo(tx, idx, fifoaddr);
 
 			csr = readw(&musbr->txcsr);
-#if defined(CONFIG_MUSB_HCD)
+#if defined(CONFIG_USB_MUSB_HCD)
 			/* clear the data toggle bit */
 			writew(csr | MUSB_TXCSR_CLRDATATOG, &musbr->txcsr);
 #endif
@@ -94,7 +94,7 @@ void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt)
 			config_fifo(rx, idx, fifoaddr);
 
 			csr = readw(&musbr->rxcsr);
-#if defined(CONFIG_MUSB_HCD)
+#if defined(CONFIG_USB_MUSB_HCD)
 			/* clear the data toggle bit */
 			writew(csr | MUSB_RXCSR_CLRDATATOG, &musbr->rxcsr);
 #endif

drivers/usb/musb/musb_hcd.c

@@ -117,7 +117,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
 {
 	u16 csr;
 	int result = 1;
-	int timeout = CONFIG_MUSB_TIMEOUT;
+	int timeout = CONFIG_USB_MUSB_TIMEOUT;
 
 	while (result > 0) {
 		csr = readw(&musbr->txcsr);
@@ -179,7 +179,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
 static int wait_until_txep_ready(struct usb_device *dev, u8 ep)
 {
 	u16 csr;
-	int timeout = CONFIG_MUSB_TIMEOUT;
+	int timeout = CONFIG_USB_MUSB_TIMEOUT;
 
 	do {
 		if (check_stall(ep, 1)) {
@@ -211,7 +211,7 @@ static int wait_until_txep_ready(struct usb_device *dev, u8 ep)
 static int wait_until_rxep_ready(struct usb_device *dev, u8 ep)
 {
 	u16 csr;
-	int timeout = CONFIG_MUSB_TIMEOUT;
+	int timeout = CONFIG_USB_MUSB_TIMEOUT;
 
 	do {
 		if (check_stall(ep, 0)) {

drivers/usb/musb/musb_hcd.h

@@ -17,8 +17,8 @@
 extern unsigned char new[];
 #endif
 
-#ifndef CONFIG_MUSB_TIMEOUT
-# define CONFIG_MUSB_TIMEOUT 100000
+#ifndef CONFIG_USB_MUSB_TIMEOUT
+# define CONFIG_USB_MUSB_TIMEOUT 100000
 #endif
 
 /* This defines the endpoint number used for control transfers */

include/configs/am335x_evm.h

@@ -283,14 +283,14 @@
  */
 #define CONFIG_USB_MUSB_DSPS
 #define CONFIG_ARCH_MISC_INIT
-#define CONFIG_MUSB_GADGET
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#define CONFIG_USB_MUSB_GADGET
+#define CONFIG_USB_MUSB_PIO_ONLY
+#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
-#define CONFIG_MUSB_HOST
+#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
@@ -309,12 +309,12 @@
 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
 #endif
 
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #endif
 
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
@@ -323,7 +323,7 @@
 #define CONFIG_G_DNL_VENDOR_NUM 0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM 0xD022
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
-#endif /* CONFIG_MUSB_GADGET */
+#endif /* CONFIG_USB_MUSB_GADGET */
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 /* Remove other SPL modes. */
@@ -333,7 +333,7 @@
 #define CONFIG_ENV_IS_NOWHERE
 #undef CONFIG_ENV_IS_IN_NAND
 /* disable host part of MUSB in SPL */
-#undef CONFIG_MUSB_HOST
+#undef CONFIG_USB_MUSB_HOST
 /* disable EFI partitions and partition UUID support */
 #undef CONFIG_PARTITION_UUIDS
 #undef CONFIG_EFI_PARTITION

include/configs/am3517_crane.h

@@ -91,15 +91,15 @@
 
 /*
  * USB configuration
- * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
- * Enable CONFIG_MUSB_UDC for Device functionalities.
+ * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
+ * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
  */
 #define CONFIG_USB_AM35X		1
-#define CONFIG_MUSB_HCD			1
+#define CONFIG_USB_MUSB_HCD			1
 
 #ifdef CONFIG_USB_AM35X
 
-#ifdef CONFIG_MUSB_HCD
+#ifdef CONFIG_USB_MUSB_HCD
 #define CONFIG_CMD_USB
 
 #define CONFIG_USB_STORAGE
@@ -111,9 +111,9 @@
 #define CONFIG_PREBOOT "usb start"
 #endif /* CONFIG_USB_KEYBOARD */
 
-#endif /* CONFIG_MUSB_HCD */
+#endif /* CONFIG_USB_MUSB_HCD */
 
-#ifdef CONFIG_MUSB_UDC
+#ifdef CONFIG_USB_MUSB_UDC
 /* USB device configuration */
 #define CONFIG_USB_DEVICE		1
 #define CONFIG_USB_TTY			1
@@ -123,7 +123,7 @@
 #define CONFIG_USBD_PRODUCTID		0x5678
 #define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME	"AM3517CRANE"
-#endif /* CONFIG_MUSB_UDC */
+#endif /* CONFIG_USB_MUSB_UDC */
 
 #endif /* CONFIG_USB_AM35X */
 

include/configs/am3517_evm.h

@@ -97,16 +97,16 @@
 
 /*
  * USB configuration
- * Enable CONFIG_MUSB_HOST for Host functionalities MSC, keyboard
- * Enable CONFIG_MUSB_GADGET for Device functionalities.
+ * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
+ * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
  */
 #define CONFIG_USB_MUSB_AM35X
-#define CONFIG_MUSB_HOST
-#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_USB_MUSB_HOST
+#define CONFIG_USB_MUSB_PIO_ONLY
 
 #ifdef CONFIG_USB_MUSB_AM35X
 
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
 #define CONFIG_CMD_USB
 
 #define CONFIG_USB_STORAGE
@@ -118,13 +118,13 @@
 #define CONFIG_PREBOOT "usb start"
 #endif /* CONFIG_USB_KEYBOARD */
 
-#endif /* CONFIG_MUSB_HOST */
+#endif /* CONFIG_USB_MUSB_HOST */
 
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
-#endif /* CONFIG_MUSB_GADGET */
+#endif /* CONFIG_USB_MUSB_GADGET */
 
 #endif /* CONFIG_USB_MUSB_AM35X */
 

include/configs/baltos.h

@@ -273,25 +273,25 @@
  */
 #define CONFIG_USB_MUSB_DSPS
 #define CONFIG_ARCH_MISC_INIT
-#define CONFIG_MUSB_GADGET
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#define CONFIG_USB_MUSB_GADGET
+#define CONFIG_USB_MUSB_PIO_ONLY
+#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET
 #define CONFIG_USBDOWNLOAD_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
-#define CONFIG_MUSB_HOST
+#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_OTG
 
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #endif
 
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
@@ -300,11 +300,11 @@
 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
-#endif /* CONFIG_MUSB_GADGET */
+#endif /* CONFIG_USB_MUSB_GADGET */
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 /* disable host part of MUSB in SPL */
-#undef CONFIG_MUSB_HOST
+#undef CONFIG_USB_MUSB_HOST
 /* disable EFI partitions and partition UUID support */
 #undef CONFIG_PARTITION_UUIDS
 #undef CONFIG_EFI_PARTITION

include/configs/bav335x.h

@@ -440,14 +440,14 @@ DEFAULT_LINUX_BOOT_ENV \
  */
 #define CONFIG_USB_MUSB_DSPS
 #define CONFIG_ARCH_MISC_INIT
-#define CONFIG_MUSB_GADGET