More code cleanup

CHANGELOG

@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* More code cleanup
+
 * Disabled kvme080 board in MAKEALL because of build problems.
 
 * Code cleanup

board/Marvell/include/core.h

@@ -91,7 +91,10 @@ extern unsigned int INTERNAL_REG_BASE_ADDR;
 #define _1G		0x40000000
 #define _2G		0x80000000
 
+#ifndef	BOOL_WAS_DEFINED
+#define BOOL_WAS_DEFINED
 typedef enum _bool{false,true} bool;
+#endif
 
 /* Little to Big endian conversion macros */
 

board/fads/fads.h

@@ -467,7 +467,9 @@
 #define CONFIG_ISO_PARTITION	1
 
 #undef	CONFIG_ATAPI
+#if 0	/* does not make sense when CFG_CMD_IDE is not enabled, too */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+#endif
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/

board/tqm834x/tqm834x.c

@@ -424,10 +424,12 @@ static void set_ddr_config(void) {
 		 * which has to be written with a certain value defined by
 		 * errata sheet.
 		 */
+		u32 *reserved_p = (u32 *)((u8 *)im + 0x2f00);
+
 #if defined(DDR_CASLAT_20)
-		*((u8 *)im + 0x2f00) = 0x201c0000;
+		*reserved_p = 0x201c0000;
 #else
-		*((u8 *)im + 0x2f00) = 0x202c0000;
+		*reserved_p = 0x202c0000;
 #endif
 	}
 }

board/tqm85xx/tqm85xx.c

@@ -42,6 +42,7 @@ extern flash_info_t flash_info[];	/* FLASH chips info */
 void local_bus_init (void);
 long int fixed_sdram (void);
 ulong flash_get_size (ulong base, int banknum);
+
 #ifdef CONFIG_PS2MULT
 void ps2mult_early_init(void);
 #endif

common/xyzModem.c

@@ -261,8 +261,8 @@ zm_dprintf(char *fmt, ...)
 static void
 zm_flush(void)
 {
-    char *p = zm_out_start;
 #ifdef REDBOOT
+    char *p = zm_out_start;
     while (*p) mon_write_char(*p++);
 #endif
     zm_out = zm_out_start;

drivers/mpc8xx_pcmcia.c

 #include <common.h>
+#if defined(CONFIG_8xx)
 #include <mpc8xx.h>
+#endif
 #include <pcmcia.h>
 
 #undef	CONFIG_PCMCIA

drivers/ps2ser.c

@@ -20,7 +20,7 @@
 #include <asm/io.h>
 #include <asm/atomic.h>
 #include <ps2mult.h>
-#ifdef CFG_NS16550
+#if defined(CFG_NS16550) || defined(CONFIG_MPC85xx)
 #include <ns16550.h>
 #endif
 

drivers/rpx_pcmcia.c

@@ -2,7 +2,9 @@
 /* RPX Boards from Embedded Planet					*/
 /* -------------------------------------------------------------------- */
 #include <common.h>
+#ifdef CONFIG_8xx
 #include <mpc8xx.h>
+#endif
 #include <pcmcia.h>
 
 #undef	CONFIG_PCMCIA

drivers/tqm8xx_pcmcia.c

@@ -3,7 +3,9 @@
 /* SC8xx   Boards by SinoVee Microsystems				*/
 /* -------------------------------------------------------------------- */
 #include <common.h>
+#ifdef CONFIG_8xx
 #include <mpc8xx.h>
+#endif
 #include <pcmcia.h>
 
 #undef	CONFIG_PCMCIA
@@ -242,8 +244,6 @@ int pcmcia_hardware_enable(int slot)
 #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
 int pcmcia_hardware_disable(int slot)
 {
-	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
 	u_long reg;
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
@@ -268,9 +268,11 @@ int pcmcia_hardware_disable(int slot)
 int pcmcia_voltage_set(int slot, int vcc, int vpp)
 {
 #ifndef CONFIG_NSCU
+	u_long reg;
+# ifdef DEBUG
 	volatile pcmconf8xx_t *pcmp =
 		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	u_long reg;
+# endif
 
 	debug ("voltage_set: " PCMCIA_BOARD_MSG
 		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",

include/configs/TQM85xx.h

@@ -158,7 +158,7 @@
 #undef  CONFIG_CONS_NONE        /* define if console on something else */
 #define CONFIG_CONS_INDEX       1  /* which serial channel for console */
 
-#else
+#else	/* ! TQM8560 */
 
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
@@ -170,13 +170,6 @@
 #define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
 #define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
 
-#endif /* CONFIG_TQM8560 */
-
-#define CONFIG_BAUDRATE         115200
-
-#define CFG_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
 /* PS/2 Keyboard */
 #if !defined(CONFIG_TQM8560)
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
@@ -186,6 +179,13 @@
 #define CONFIG_BOARD_EARLY_INIT_R	1
 #endif /* !CONFIG_TQM8560 */
 
+#endif /* CONFIG_TQM8560 */
+
+#define CONFIG_BAUDRATE         115200
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
 #ifdef	CFG_HUSH_PARSER

include/galileo/core.h

@@ -110,7 +110,10 @@ extern unsigned int INTERNAL_REG_BASE_ADDR;
 #define _1G             0x40000000
 #define _2G             0x80000000
 
+#ifndef	BOOL_WAS_DEFINED
+#define BOOL_WAS_DEFINED
 typedef enum _bool{false,true} bool;
+#endif
 
 /* Little to Big endian conversion macros */
 

include/xyzModem.h

@@ -97,7 +97,10 @@ typedef struct {
 #endif
 } connection_info_t;
 
+#ifndef	BOOL_WAS_DEFINED
+#define BOOL_WAS_DEFINED
 typedef unsigned int bool;
+#endif
 
 #define false 0
 #define true 1