Commit 96c19bd3 authored by Troy Kisky's avatar Troy Kisky Committed by Heiko Schocher
Browse files

mxc_i2c: add bus recovery support

Add support for calling a function that will toggle the
SCL line to return the bus to idle condition.

The actual toggling function is added in a later patch.
Signed-off-by: default avatarTroy Kisky <>
parent e4ff525f
......@@ -251,6 +251,8 @@ static int i2c_init_transfer_(struct mxc_i2c_regs *i2c_regs,
return 0;
static int i2c_idle_bus(void *base);
static int i2c_init_transfer(struct mxc_i2c_regs *i2c_regs,
uchar chip, uint addr, int alen)
......@@ -269,6 +271,8 @@ static int i2c_init_transfer(struct mxc_i2c_regs *i2c_regs,
if (ret != -ERESTART)
writeb(0, &i2c_regs->i2cr); /* Disable controller */
if (i2c_idle_bus(i2c_regs) < 0)
printf("%s: give up i2c_regs=%p\n", __func__, i2c_regs);
return ret;
......@@ -390,6 +394,28 @@ void *get_base(void)
static struct i2c_parms *i2c_get_parms(void *base)
int i = 0;
struct i2c_parms *p = srdata.i2c_data;
while (i < ARRAY_SIZE(srdata.i2c_data)) {
if (p->base == base)
return p;
printf("Invalid I2C base: %p\n", base);
return NULL;
static int i2c_idle_bus(void *base)
struct i2c_parms *p = i2c_get_parms(base);
if (p && p->idle_bus_fn)
return p->idle_bus_fn(p->idle_bus_data);
return 0;
int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
return bus_i2c_read(get_base(), chip, addr, alen, buf, len);
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment