Commit 97cae3a4 authored by Stefan Roese's avatar Stefan Roese Committed by Wolfgang Denk

serial: Rename driver vcth to vct to support other board variants

Moved driver vcth.c to vct.c to better reflect the VCT board series.
This driver is now used by the VCT platforms:

vct_premium
vct_platinum
vct_platinumsvc
Signed-off-by: default avatarStefan Roese <sr@denx.de>
parent 36ede4d6
......@@ -38,7 +38,7 @@ COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
COBJS-$(CONFIG_USB_TTY) += usbtty.o
COBJS-$(CONFIG_VCTH_SERIAL) += vcth.o
COBJS-$(CONFIG_VCT_SERIAL) += vct.o
COBJS := $(sort $(COBJS-y))
SRCS := $(COBJS:.o=.c)
......
......@@ -21,7 +21,11 @@
#include <common.h>
#include <asm/io.h>
#ifdef CONFIG_VCT_PLATINUMAVC
#define UART_1_BASE 0xBDC30000
#else
#define UART_1_BASE 0xBF89C000
#endif
#define UART_RBR_OFF 0x00 /* receiver buffer reg */
#define UART_THR_OFF 0x00 /* transmit holding reg */
......@@ -53,7 +57,7 @@
#define UART_7DATA_BITS 0x0002 /* 7 [bits] 1 bits 2 */
#define UART_8DATA_BITS 0x0003 /* 8 [bits] 1 bits 2 */
static void vcth_uart_set_baud_rate(u32 address, u32 dh, u32 dl)
static void vct_uart_set_baud_rate(u32 address, u32 dh, u32 dl)
{
u32 val = __raw_readl(UART_1_BASE + UART_LCR_OFF);
......@@ -74,7 +78,7 @@ static void vcth_uart_set_baud_rate(u32 address, u32 dh, u32 dl)
int serial_init(void)
{
__raw_writel(UART_DIS_ALL_INTER, UART_1_BASE + UART_IER_OFF);
vcth_uart_set_baud_rate(UART_1_BASE, 0, UART_115200_BDR);
vct_uart_set_baud_rate(UART_1_BASE, 0, UART_115200_BDR);
__raw_writel(UART_8DATA_BITS, UART_1_BASE + UART_LCR_OFF);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment