Commit 99e1bd42 authored by Tang Yuantian's avatar Tang Yuantian Committed by York Sun

armv7/ls1021atwr: added deep sleep support in uboot

Signed-off-by: default avatarTang Yuantian <Yuantian.Tang@freescale.com>
Acked-by: default avatarAlison Wang <alison.wang@freescale.com>
Reviewed-by: default avatarYork Sun <yorksun@freescale.com>
parent 562583de
......@@ -22,6 +22,7 @@
#include <tsec.h>
#include <fsl_sec.h>
#include <spl.h>
#include "../common/sleep.h"
#ifdef CONFIG_U_QE
#include "../../../drivers/qe/qe.h"
#endif
......@@ -148,6 +149,7 @@ unsigned int get_soc_major_rev(void)
void ddrmc_init(void)
{
struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR;
u32 temp_sdram_cfg;
out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG);
......@@ -161,7 +163,22 @@ void ddrmc_init(void)
out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4);
out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5);
out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2);
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
out_be32(&ddr->sdram_cfg_2,
DDR_SDRAM_CFG_2 & ~SDRAM_CFG2_D_INIT);
out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
out_be32(&ddr->init_ext_addr, (1 << 31));
/* DRAM VRef will not be trained */
out_be32(&ddr->ddr_cdr2,
DDR_DDR_CDR2 & ~DDR_CDR2_VREF_TRAIN_EN);
} else
#endif
{
out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2);
out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2);
}
out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE);
out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2);
......@@ -174,14 +191,35 @@ void ddrmc_init(void)
out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3);
out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1);
out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2);
out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL);
out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL);
out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2);
udelay(1);
out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | DDR_SDRAM_CFG_MEM_EN);
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
/* enter self-refresh */
temp_sdram_cfg = in_be32(&ddr->sdram_cfg_2);
temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg);
temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN | SDRAM_CFG_BI);
} else
#endif
temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN & ~SDRAM_CFG_BI);
out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | temp_sdram_cfg);
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
/* exit self-refresh */
temp_sdram_cfg = in_be32(&ddr->sdram_cfg_2);
temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg);
}
#endif
}
int dram_init(void)
......@@ -191,6 +229,11 @@ int dram_init(void)
#endif
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
fsl_dp_resume();
#endif
return 0;
}
......@@ -388,6 +431,11 @@ int board_early_init_f(void)
out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
}
#if defined(CONFIG_DEEP_SLEEP)
if (is_warm_boot())
fsl_dp_disable_console();
#endif
return 0;
}
......@@ -399,6 +447,11 @@ void board_init_f(ulong dummy)
get_clocks();
#if defined(CONFIG_DEEP_SLEEP)
if (is_warm_boot())
fsl_dp_disable_console();
#endif
preloader_console_init();
dram_init();
......@@ -567,6 +620,15 @@ int misc_init_r(void)
}
#endif
#if defined(CONFIG_DEEP_SLEEP)
void board_sleep_prepare(void)
{
#ifdef CONFIG_LS102XA_NS_ACCESS
enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
#endif
}
#endif
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
......
......@@ -18,6 +18,10 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DEEP_SLEEP
#ifdef CONFIG_DEEP_SLEEP
#define CONFIG_SILENT_CONSOLE
#endif
/*
* Size of malloc() pool
......@@ -95,6 +99,10 @@
#define DDR_DDR_ZQ_CNTL 0x89080600
#define DDR_CS0_CONFIG_2 0
#define DDR_SDRAM_CFG_MEM_EN 0x80000000
#define SDRAM_CFG2_D_INIT 0x00000010
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG_BI 0x00000001
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
......@@ -121,7 +129,8 @@
#define CONFIG_SPL_PAD_TO 0x1c000
#define CONFIG_SYS_TEXT_BASE 0x82000000
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment