Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

This converts the following to Kconfig:
   CONFIG_BOARD_EARLY_INIT_F

Signed-off-by: Simon Glass <sjg@chromium.org>

arch/arm/Kconfig

@@ -201,6 +201,7 @@ config ARCH_DAVINCI
 config KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config ARCH_MVEBU
 	bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
@@ -226,6 +227,7 @@ config TARGET_MX25PDK
 	bool "Support mx25pdk"
 	select BOARD_LATE_INIT
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config TARGET_ZMX25
 	bool "Support zmx25"
@@ -256,16 +258,19 @@ config TARGET_MX23EVK
 	bool "Support mx23evk"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX28EVK
 	bool "Support mx28evk"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX23_OLINUXINO
 	bool "Support mx23_olinuxino"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_BG0900
 	bool "Support bg0900"
@@ -289,18 +294,22 @@ config ORION5X
 config TARGET_SPEAR300
 	bool "Support spear300"
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SPEAR310
 	bool "Support spear310"
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SPEAR320
 	bool "Support spear320"
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SPEAR600
 	bool "Support spear600"
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config TARGET_STV0991
 	bool "Support stv0991"
@@ -320,21 +329,25 @@ config TARGET_X600
 config TARGET_IMX31_PHYCORE
 	bool "Support imx31_phycore_eet"
 	select CPU_ARM1136
+	select BOARD_EARLY_INIT_F
 
 config TARGET_IMX31_PHYCORE_EET
 	bool "Support imx31_phycore_eet"
 	select BOARD_LATE_INIT
 	select CPU_ARM1136
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX31ADS
 	bool "Support mx31ads"
 	select CPU_ARM1136
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX31PDK
 	bool "Support mx31pdk"
 	select BOARD_LATE_INIT
 	select CPU_ARM1136
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_WOODBURN
 	bool "Support woodburn"
@@ -503,6 +516,7 @@ config ARCH_MX7
 	select SYS_FSL_HAS_SEC if SECURE_BOOT
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
+	select BOARD_EARLY_INIT_F
 
 config ARCH_MX6
 	bool "Freescale MX6"
@@ -514,34 +528,41 @@ config ARCH_MX6
 config ARCH_MX5
 	bool "Freescale MX5"
 	select CPU_V7
+	select BOARD_EARLY_INIT_F
 
 config TARGET_M53EVK
 	bool "Support m53evk"
 	select CPU_V7
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX51EVK
 	bool "Support mx51evk"
 	select BOARD_LATE_INIT
 	select CPU_V7
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX53ARD
 	bool "Support mx53ard"
 	select CPU_V7
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX53EVK
 	bool "Support mx53evk"
 	select BOARD_LATE_INIT
 	select CPU_V7
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX53LOCO
 	bool "Support mx53loco"
 	select BOARD_LATE_INIT
 	select CPU_V7
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX53SMD
 	bool "Support mx53smd"
 	select CPU_V7
+	select BOARD_EARLY_INIT_F
 
 config OMAP34XX
 	bool "OMAP34XX SoC"
@@ -581,6 +602,7 @@ config ARCH_RMOBILE
 	bool "Renesas ARM SoCs"
 	select DM
 	select DM_SERIAL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_S32V234EVB
 	bool "Support s32v234evb"
@@ -829,6 +851,7 @@ config TARGET_LS1021AQDS
 	select ARCH_SUPPORT_PSCI
 	select LS1_DEEP_SLEEP
 	select SYS_FSL_DDR
+	select BOARD_EARLY_INIT_F
 
 config TARGET_LS1021ATWR
 	bool "Support ls1021atwr"
@@ -840,6 +863,7 @@ config TARGET_LS1021ATWR
 	select ARCH_LS1021A
 	select ARCH_SUPPORT_PSCI
 	select LS1_DEEP_SLEEP
+	select BOARD_EARLY_INIT_F
 
 config TARGET_LS1021AIOT
 	bool "Support ls1021aiot"
@@ -863,6 +887,7 @@ config TARGET_LS1043AQDS
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 	help
 	  Support for Freescale LS1043AQDS platform.
 
@@ -873,6 +898,7 @@ config TARGET_LS1043ARDB
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 	help
 	  Support for Freescale LS1043ARDB platform.
 
@@ -884,6 +910,7 @@ config TARGET_LS1046AQDS
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select DM_SPI_FLASH if DM_SPI
+	select BOARD_EARLY_INIT_F
 	help
 	  Support for Freescale LS1046AQDS platform.
 	  The LS1046A Development System (QDS) is a high-performance
@@ -899,6 +926,7 @@ config TARGET_LS1046ARDB
 	select SUPPORT_SPL
 	select DM_SPI_FLASH if DM_SPI
 	select POWER_MC34VR500
+	select BOARD_EARLY_INIT_F
 	help
 	  Support for Freescale LS1046ARDB platform.
 	  The LS1046A Reference Design Board (RDB) is a high-performance

arch/arm/cpu/armv7/mx6/Kconfig

@@ -162,6 +162,7 @@ config TARGET_MX6QSABREAUTO
 	select BOARD_LATE_INIT
 	select DM
 	select DM_THERMAL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX6SABRESD
 	bool "mx6sabresd"
@@ -169,6 +170,7 @@ config TARGET_MX6SABRESD
 	select SUPPORT_SPL
 	select DM
 	select DM_THERMAL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX6SLEVK
 	bool "mx6slevk"
@@ -187,6 +189,7 @@ config TARGET_MX6SXSABRESD
 	select SUPPORT_SPL
 	select DM
 	select DM_THERMAL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX6SXSABREAUTO
         bool "mx6sxsabreauto"
@@ -194,6 +197,7 @@ config TARGET_MX6SXSABREAUTO
 	select MX6SX
         select DM
         select DM_THERMAL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MX6UL_9X9_EVK
 	bool "mx6ul_9x9_evk"

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -6,6 +6,7 @@ config ARCH_LS1012A
 	select SYS_FSL_MMDC
 	select SYS_FSL_ERRATUM_A010315
 	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
 
 config ARCH_LS1043A
 	bool
@@ -24,6 +25,7 @@ config ARCH_LS1043A
 	select SYS_FSL_HAS_DDR3
 	select SYS_FSL_HAS_DDR4
 	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
 
 config ARCH_LS1046A
 	bool
@@ -41,6 +43,7 @@ config ARCH_LS1046A
 	select SYS_FSL_HAS_DDR4
 	select SYS_FSL_SRDS_2
 	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
 
 config ARCH_LS2080A
 	bool
@@ -66,6 +69,7 @@ config ARCH_LS2080A
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010165
 	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
 
 config FSL_LSCH2
 	bool

arch/arm/mach-at91/Kconfig

@@ -11,6 +11,7 @@ config TARGET_AT91RM9200EK
 config TARGET_AT91SAM9260EK
 	bool "Atmel at91sam9260 reference board"
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config TARGET_ETHERNUT5
 	bool "Ethernut5 board"
@@ -43,6 +44,7 @@ config TARGET_PM9261
 config TARGET_AT91SAM9263EK
 	bool "Atmel at91sam9263 reference board"
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config TARGET_USB_A9263
 	bool "Caloa USB A9260 board"
@@ -56,6 +58,7 @@ config TARGET_AT91SAM9M10G45EK
 	bool "Atmel AT91SAM9M10G45-EK board"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_PM9G45
 	bool "Ronetix pm9g45 board"
@@ -70,46 +73,55 @@ config TARGET_AT91SAM9N12EK
 	bool "Atmel AT91SAM9N12-EK board"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_AT91SAM9RLEK
 	bool "Atmel at91sam9rl reference board"
 	select CPU_ARM926EJS
+	select BOARD_EARLY_INIT_F
 
 config TARGET_AT91SAM9X5EK
 	bool "Atmel AT91SAM9X5-EK board"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D2_PTC
 	bool "SAMA5D2 PTC board"
 	select CPU_V7
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D2_XPLAINED
 	bool "SAMA5D2 Xplained board"
 	select CPU_V7
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D3_XPLAINED
 	bool "SAMA5D3 Xplained board"
 	select CPU_V7
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D3XEK
 	bool "SAMA5D3X-EK board"
 	select BOARD_LATE_INIT
 	select CPU_V7
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D4_XPLAINED
 	bool "SAMA5D4 Xplained board"
 	select CPU_V7
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D4EK
 	bool "SAMA5D4 Evaluation Kit"
 	select CPU_V7
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MA5D4EVK
 	bool "DENX MA5D4EVK Evaluation Kit"

arch/arm/mach-exynos/Kconfig

@@ -7,6 +7,7 @@ choice
 config ARCH_EXYNOS4
 	bool "Exynos4 SoC family"
 	select CPU_V7
+	select BOARD_EARLY_INIT_F
 	help
 	  Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
 	  are multiple SoCs in this family including Exynos4210, Exynos4412,
@@ -15,6 +16,7 @@ config ARCH_EXYNOS4
 config ARCH_EXYNOS5
 	bool "Exynos5 SoC family"
 	select CPU_V7
+	select BOARD_EARLY_INIT_F
 	help
 	  Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
 	  Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs
@@ -23,6 +25,7 @@ config ARCH_EXYNOS5
 config ARCH_EXYNOS7
 	bool "Exynos7 SoC family"
 	select ARM64
+	select BOARD_EARLY_INIT_F
 	help
 	  Samsung Exynos7 SoC family are based on ARM Cortex-A57 CPU or
 	  Cortex-A53 CPU (and some in a big.LITTLE configuration). There are

arch/arm/mach-mvebu/Kconfig

@@ -8,6 +8,7 @@ config ARMADA_32BIT
 	select SPL_DM_SEQ_ALIAS
 	select SPL_OF_CONTROL
 	select SPL_SIMPLE_BUS
+	select BOARD_EARLY_INIT_F
 
 config ARMADA_64BIT
 	bool

arch/arm/mach-tegra/Kconfig

@@ -37,6 +37,7 @@ config TEGRA_COMMON
 	select MISC
 	select OF_CONTROL
 	select VIDCONSOLE_AS_LCD if DM_VIDEO
+	select BOARD_EARLY_INIT_F
 
 config TEGRA_NO_BPMP
 	bool "Tegra common options for SoCs without BPMP"

arch/powerpc/cpu/mpc83xx/Kconfig

@@ -27,30 +27,36 @@ config TARGET_MPC8308RDB
 config TARGET_MPC8313ERDB
 	bool "Support MPC8313ERDB"
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8315ERDB
 	bool "Support MPC8315ERDB"
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8323ERDB
 	bool "Support MPC8323ERDB"
 
 config TARGET_MPC832XEMDS
 	bool "Support MPC832XEMDS"
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8349EMDS
 	bool "Support MPC8349EMDS"
 	select SYS_FSL_DDR
 	select SYS_FSL_HAS_DDR2
 	select SYS_FSL_DDR_BE
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8349ITX
 	bool "Support MPC8349ITX"
 
 config TARGET_MPC837XEMDS
 	bool "Support MPC837XEMDS"
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC837XERDB
 	bool "Support MPC837XERDB"
+	select BOARD_EARLY_INIT_F
 
 config TARGET_IDS8313
 	bool "Support ids8313"

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -33,12 +33,14 @@ config TARGET_BSC9131RDB
 	bool "Support BSC9131RDB"
 	select ARCH_BSC9131
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_BSC9132QDS
 	bool "Support BSC9132QDS"
 	select ARCH_BSC9132
 	select BOARD_LATE_INIT if CHAIN_OF_TRUST
 	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
 
 config TARGET_C29XPCIE
 	bool "Support C29XPCIE"

arch/powerpc/cpu/mpc86xx/Kconfig

@@ -11,10 +11,12 @@ choice
 config TARGET_SBC8641D
 	bool "Support sbc8641d"
 	select ARCH_MPC8641
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8610HPCD
 	bool "Support MPC8610HPCD"
 	select ARCH_MPC8610
+	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8641HPCN
 	bool "Support MPC8641HPCN"

common/Kconfig

@@ -410,6 +410,16 @@ config ARCH_EARLY_INIT_R
 	  is on. Note that board_early_init_r() is called first, if
 	  enabled. This can be used to set up architecture-specific devices.
 
+config BOARD_EARLY_INIT_F
+	bool "Call board-specific init before relocation"
+	default y if X86
+	help
+	  Some boards need to perform initialisation as soon as possible
+	  after boot. With this option, U-Boot calls board_early_init_f()
+	  after driver model is ready in the pre-relocation init sequence.
+	  Note that the normal serial console is not yet set up, but the
+	  debug UART will be available if enabled.
+
 endmenu
 
 source "common/spl/Kconfig"

configs/CPCI2DP_defconfig

@@ -5,6 +5,7 @@ CONFIG_TARGET_CPCI2DP=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_LOOPW=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set

configs/CPCI4052_defconfig

@@ -6,6 +6,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "

configs/Cyrus_P5020_defconfig

@@ -8,6 +8,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000"
 CONFIG_BOOTDELAY=10
 CONFIG_CONSOLE_MUX=y
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_GREPENV=y

configs/Cyrus_P5040_defconfig

@@ -8,6 +8,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000"
 CONFIG_BOOTDELAY=10
 CONFIG_CONSOLE_MUX=y
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_GREPENV=y

configs/MIP405T_defconfig

@@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set

configs/MIP405_defconfig

@@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y

configs/MPC8536DS_36BIT_defconfig

@@ -7,6 +7,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=10
 # CONFIG_CONSOLE_MUX is not set
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/MPC8536DS_SDCARD_defconfig

@@ -7,6 +7,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 # CONFIG_CONSOLE_MUX is not set
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/MPC8536DS_SPIFLASH_defconfig

@@ -7,6 +7,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_BOOTDELAY=10
 # CONFIG_CONSOLE_MUX is not set
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y