Commit a62e84d7 authored by Bin Meng's avatar Bin Meng Committed by Simon Glass
Browse files

fdt: Add several apis to decode pci device node



This commit adds several APIs to decode PCI device node according to
the Open Firmware PCI bus bindings, including:
- fdtdec_get_pci_addr() for encoded pci address
- fdtdec_get_pci_vendev() for vendor id and device id
- fdtdec_get_pci_bdf() for pci device bdf triplet
- fdtdec_get_pci_bar32() for pci device register bar
Signed-off-by: default avatarBin Meng <bmeng.cn@gmail.com>
Acked-by: default avatarSimon Glass <sjg@chromium.org>
Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
(Include <pci.h> in fdtdec.h and adjust tegra to fix build error)
parent 949dbc12
......@@ -458,6 +458,7 @@ static int tegra_pcie_parse_port_info(const void *fdt, int node,
unsigned int *index,
unsigned int *lanes)
{
struct fdt_pci_addr addr;
pci_dev_t bdf;
int err;
......@@ -469,7 +470,7 @@ static int tegra_pcie_parse_port_info(const void *fdt, int node,
*lanes = err;
err = fdtdec_pci_get_bdf(fdt, node, &bdf);
err = fdtdec_get_pci_bdf(fdt, node, &addr, &bdf);
if (err < 0) {
error("failed to parse \"reg\" property");
return err;
......
......@@ -15,6 +15,7 @@
*/
#include <libfdt.h>
#include <pci.h>
/*
* A typedef for a physical address. Note that fdt data is always big
......@@ -50,6 +51,49 @@ struct fdt_resource {
fdt_addr_t end;
};
enum fdt_pci_space {
FDT_PCI_SPACE_CONFIG = 0,
FDT_PCI_SPACE_IO = 0x01000000,
FDT_PCI_SPACE_MEM32 = 0x02000000,
FDT_PCI_SPACE_MEM64 = 0x03000000,
FDT_PCI_SPACE_MEM32_PREF = 0x42000000,
FDT_PCI_SPACE_MEM64_PREF = 0x43000000,
};
#define FDT_PCI_ADDR_CELLS 3
#define FDT_PCI_SIZE_CELLS 2
#define FDT_PCI_REG_SIZE \
((FDT_PCI_ADDR_CELLS + FDT_PCI_SIZE_CELLS) * sizeof(u32))
/*
* The Open Firmware spec defines PCI physical address as follows:
*
* bits# 31 .... 24 23 .... 16 15 .... 08 07 .... 00
*
* phys.hi cell: npt000ss bbbbbbbb dddddfff rrrrrrrr
* phys.mid cell: hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh
* phys.lo cell: llllllll llllllll llllllll llllllll
*
* where:
*
* n: is 0 if the address is relocatable, 1 otherwise
* p: is 1 if addressable region is prefetchable, 0 otherwise
* t: is 1 if the address is aliased (for non-relocatable I/O) below 1MB
* (for Memory), or below 64KB (for relocatable I/O)
* ss: is the space code, denoting the address space
* bbbbbbbb: is the 8-bit Bus Number
* ddddd: is the 5-bit Device Number
* fff: is the 3-bit Function Number
* rrrrrrrr: is the 8-bit Register Number
* hhhhhhhh: is a 32-bit unsigned number
* llllllll: is a 32-bit unsigned number
*/
struct fdt_pci_addr {
u32 phys_hi;
u32 phys_mid;
u32 phys_lo;
};
/**
* Compute the size of a resource.
*
......@@ -257,6 +301,60 @@ fdt_addr_t fdtdec_get_addr(const void *blob, int node,
fdt_addr_t fdtdec_get_addr_size(const void *blob, int node,
const char *prop_name, fdt_size_t *sizep);
/**
* Look at an address property in a node and return the pci address which
* corresponds to the given type in the form of fdt_pci_addr.
* The property must hold one fdt_pci_addr with a lengh.
*
* @param blob FDT blob
* @param node node to examine
* @param type pci address type (FDT_PCI_SPACE_xxx)
* @param prop_name name of property to find
* @param addr returns pci address in the form of fdt_pci_addr
* @return 0 if ok, negative on error
*/
int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type,
const char *prop_name, struct fdt_pci_addr *addr);
/**
* Look at the compatible property of a device node that represents a PCI
* device and extract pci vendor id and device id from it.
*
* @param blob FDT blob
* @param node node to examine
* @param vendor vendor id of the pci device
* @param device device id of the pci device
* @return 0 if ok, negative on error
*/
int fdtdec_get_pci_vendev(const void *blob, int node,
u16 *vendor, u16 *device);
/**
* Look at the pci address of a device node that represents a PCI device
* and parse the bus, device and function number from it.
*
* @param blob FDT blob
* @param node node to examine
* @param addr pci address in the form of fdt_pci_addr
* @param bdf returns bus, device, function triplet
* @return 0 if ok, negative on error
*/
int fdtdec_get_pci_bdf(const void *blob, int node,
struct fdt_pci_addr *addr, pci_dev_t *bdf);
/**
* Look at the pci address of a device node that represents a PCI device
* and return base address of the pci device's registers.
*
* @param blob FDT blob
* @param node node to examine
* @param addr pci address in the form of fdt_pci_addr
* @param bar returns base address of the pci device's registers
* @return 0 if ok, negative on error
*/
int fdtdec_get_pci_bar32(const void *blob, int node,
struct fdt_pci_addr *addr, u32 *bar);
/**
* Look up a 32-bit integer property in a node and return it. The property
* must have at least 4 bytes of data. The value of the first cell is
......@@ -682,17 +780,6 @@ int fdt_get_named_resource(const void *fdt, int node, const char *property,
const char *prop_names, const char *name,
struct fdt_resource *res);
/**
* Look at the reg property of a device node that represents a PCI device
* and parse the bus, device and function number from it.
*
* @param fdt FDT blob
* @param node node to examine
* @param bdf returns bus, device, function triplet
* @return 0 if ok, negative on error
*/
int fdtdec_pci_get_bdf(const void *fdt, int node, int *bdf);
/**
* Decode a named region within a memory bank of a given type.
*
......
......@@ -126,6 +126,163 @@ fdt_addr_t fdtdec_get_addr(const void *blob, int node,
return fdtdec_get_addr_size(blob, node, prop_name, NULL);
}
#ifdef CONFIG_PCI
int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type,
const char *prop_name, struct fdt_pci_addr *addr)
{
const u32 *cell;
int len;
int ret = -ENOENT;
debug("%s: %s: ", __func__, prop_name);
/*
* If we follow the pci bus bindings strictly, we should check
* the value of the node's parent node's #address-cells and
* #size-cells. They need to be 3 and 2 accordingly. However,
* for simplicity we skip the check here.
*/
cell = fdt_getprop(blob, node, prop_name, &len);
if (!cell)
goto fail;
if ((len % FDT_PCI_REG_SIZE) == 0) {
int num = len / FDT_PCI_REG_SIZE;
int i;
for (i = 0; i < num; i++) {
debug("pci address #%d: %08lx %08lx %08lx\n", i,
(ulong)fdt_addr_to_cpu(cell[0]),
(ulong)fdt_addr_to_cpu(cell[1]),
(ulong)fdt_addr_to_cpu(cell[2]));
if ((fdt_addr_to_cpu(*cell) & type) == type) {
addr->phys_hi = fdt_addr_to_cpu(cell[0]);
addr->phys_mid = fdt_addr_to_cpu(cell[1]);
addr->phys_lo = fdt_addr_to_cpu(cell[2]);
break;
} else {
cell += (FDT_PCI_ADDR_CELLS +
FDT_PCI_SIZE_CELLS);
}
}
if (i == num)
goto fail;
return 0;
} else {
ret = -EINVAL;
}
fail:
debug("(not found)\n");
return ret;
}
int fdtdec_get_pci_vendev(const void *blob, int node, u16 *vendor, u16 *device)
{
const char *list, *end;
int len;
list = fdt_getprop(blob, node, "compatible", &len);
if (!list)
return -ENOENT;
end = list + len;
while (list < end) {
char *s;
len = strlen(list);
if (len >= strlen("pciVVVV,DDDD")) {
s = strstr(list, "pci");
/*
* check if the string is something like pciVVVV,DDDD.RR
* or just pciVVVV,DDDD
*/
if (s && s[7] == ',' &&
(s[12] == '.' || s[12] == 0)) {
s += 3;
*vendor = simple_strtol(s, NULL, 16);
s += 5;
*device = simple_strtol(s, NULL, 16);
return 0;
}
} else {
list += (len + 1);
}
}
return -ENOENT;
}
int fdtdec_get_pci_bdf(const void *blob, int node,
struct fdt_pci_addr *addr, pci_dev_t *bdf)
{
u16 dt_vendor, dt_device, vendor, device;
int ret;
/* get vendor id & device id from the compatible string */
ret = fdtdec_get_pci_vendev(blob, node, &dt_vendor, &dt_device);
if (ret)
return ret;
/* extract the bdf from fdt_pci_addr */
*bdf = addr->phys_hi & 0xffff00;
/* read vendor id & device id based on bdf */
pci_read_config_word(*bdf, PCI_VENDOR_ID, &vendor);
pci_read_config_word(*bdf, PCI_DEVICE_ID, &device);
/*
* Note there are two places in the device tree to fully describe
* a pci device: one is via compatible string with a format of
* "pciVVVV,DDDD" and the other one is the bdf numbers encoded in
* the device node's reg address property. We read the vendor id
* and device id based on bdf and compare the values with the
* "VVVV,DDDD". If they are the same, then we are good to use bdf
* to read device's bar. But if they are different, we have to rely
* on the vendor id and device id extracted from the compatible
* string and locate the real bdf by pci_find_device(). This is
* because normally we may only know device's device number and
* function number when writing device tree. The bus number is
* dynamically assigned during the pci enumeration process.
*/
if ((dt_vendor != vendor) || (dt_device != device)) {
*bdf = pci_find_device(dt_vendor, dt_device, 0);
if (*bdf == -1)
return -ENODEV;
}
return 0;
}
int fdtdec_get_pci_bar32(const void *blob, int node,
struct fdt_pci_addr *addr, u32 *bar)
{
pci_dev_t bdf;
int barnum;
int ret;
/* get pci devices's bdf */
ret = fdtdec_get_pci_bdf(blob, node, addr, &bdf);
if (ret)
return ret;
/* extract the bar number from fdt_pci_addr */
barnum = addr->phys_hi & 0xff;
if ((barnum < PCI_BASE_ADDRESS_0) || (barnum > PCI_CARDBUS_CIS))
return -EINVAL;
barnum = (barnum - PCI_BASE_ADDRESS_0) / 4;
*bar = pci_read_bar32(pci_bus_to_hose(PCI_BUS(bdf)), bdf, barnum);
return 0;
}
#endif
uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name,
uint64_t default_val)
{
......@@ -795,20 +952,6 @@ int fdt_get_named_resource(const void *fdt, int node, const char *property,
return fdt_get_resource(fdt, node, property, index, res);
}
int fdtdec_pci_get_bdf(const void *fdt, int node, int *bdf)
{
const fdt32_t *prop;
int len;
prop = fdt_getprop(fdt, node, "reg", &len);
if (!prop)
return len;
*bdf = fdt32_to_cpu(*prop) & 0xffffff;
return 0;
}
int fdtdec_decode_memory_region(const void *blob, int config_node,
const char *mem_type, const char *suffix,
fdt_addr_t *basep, fdt_size_t *sizep)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment