Commit ad7ee5d4 authored by Wolfgang Grandegger's avatar Wolfgang Grandegger Committed by Andy Fleming
Browse files

MPC85xx: TQM8548: add support for the TQM8548_BE module



The TQM8548_BE is a variant of the TQM8548 module with NAND and CAN
interface. With NAND support, the image is significantly larger and
TEXT_BASE is adjusted accordingly. U-Boot can be built for this
module with "$ make TQM8548_BE_config".
Signed-off-by: default avatarWolfgang Grandegger <wg@grandegger.com>
parent a3182348
......@@ -387,6 +387,7 @@ LIST_85xx=" \
TQM8540 \
TQM8541 \
TQM8548 \
TQM8548_BE \
TQM8555 \
TQM8560 \
XPEDITE5200 \
......
......@@ -2479,16 +2479,19 @@ stxssa_4M_config: unconfig
TQM8540_config \
TQM8541_config \
TQM8548_config \
TQM8548_BE_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
@CTYPE=$(subst TQM,,$(@:_config=)); \
$(XECHO) "... TQM"$${CTYPE}; \
@BTYPE=$(@:_config=); \
CTYPE=$(subst TQM,,$(subst _BE,,$(@:_config=))); \
$(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
XPEDITE5200_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
......
......@@ -23,7 +23,9 @@
#
# tqm85xx board
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 256k
#
ifeq ($(CONFIG_TQM8548_BE),y)
TEXT_BASE = 0xfff80000
else
TEXT_BASE = 0xfffc0000
endif
......@@ -41,6 +41,10 @@
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
#if defined(CONFIG_TQM8548_BE)
#define CONFIG_TQM8548
#endif
#define CONFIG_PCI
#define CONFIG_PCI1 /* PCI/PCI-X controller */
#ifdef CONFIG_TQM8548
......@@ -71,7 +75,9 @@
* Warning: NAND support will likely increase the U-Boot image size
* to more than 256 KB. Please adjust TEXT_BASE if necessary.
*/
#undef CONFIG_NAND
#ifdef CONFIG_TQM8548_BE
#define CONFIG_NAND
#endif
/*
* MPC8540 and MPC8548 don't have CPM module
......@@ -82,7 +88,9 @@
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#undef CONFIG_CAN_DRIVER /* CAN Driver support */
#ifdef CONFIG_TQM8548_BE
#define CONFIG_CAN_DRIVER /* CAN Driver support */
#endif
/*
* sysclk for MPC85xx
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment