Commit afee59cd authored by Murali Karicheri's avatar Murali Karicheri Committed by Tom Rini

keystone: init: enable UART1 to be able use it from kernel

Currently PWREMU_MGMT is not configured in the Linux generic UART
driver as this register seems to be specific TI UART IP. So this
needs to be enabled in u-boot to use UART1 from kernel space.
Acked-By: default avatarVitaly Andrianov <vitalya@ti.com>
Signed-off-by: default avatarMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: default avatarIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
parent 196311dc
......@@ -8,6 +8,7 @@
*/
#include <common.h>
#include <ns16550.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
......@@ -30,6 +31,14 @@ int arch_cpu_init(void)
share_all_segments(11); /* PCIE */
#endif
/*
* just initialise the COM2 port so that TI specific
* UART register PWREMU_MGMT is initialized. Linux UART
* driver doesn't handle this.
*/
NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM2),
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
return 0;
}
......
......@@ -115,8 +115,6 @@
#define K2HK_LPSC_ARM_SREFLEX 51
#define K2HK_LPSC_TETRIS 52
#define K2HK_UART0_BASE 0x02530c00
/* DDR3A definitions */
#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000
#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000
......
......@@ -142,6 +142,9 @@ struct ddr3_emif_config {
#define KS2_DDR3_PMCTL_OFFSET 0x38
#define KS2_DDR3_ZQCFG_OFFSET 0xC8
#define KS2_UART0_BASE 0x02530c00
#define KS2_UART1_BASE 0x02531000
#ifdef CONFIG_SOC_K2HK
#include <asm/arch/hardware-k2hk.h>
#endif
......
......@@ -71,7 +71,8 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 K2HK_UART0_BASE
#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6)
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment